New Mechanical Components and Assemblies Products

Elastomer Cushions mount externally to pneumatic cylinders.

Offering alternative for pneumatic cushions, NuCushions provide quiet operation without adjustment, and eliminate need for bleed needle assembly, cushion spud, and spud seal. Units compensate for velocity, weight, and pressure, and are unaffected by oil, grease, chemicals, sunlight, salt spray, and hydraulic fluids. Cycle rates are maintained without loss of cycle time.

Rubber Boot protects sprinklers in freezer installations.

Designed for installation with vertical or pendent, dry sprinklers, Model DSB-1 combats potentially damaging temperature changes that can adversely affect sprinklers installed in freezers. EPDM, 50-durometer boot creates airtight seal that eliminates build-up of potentially dangerous condensation by maintaining consistent temperatures outside and within freezer area. Product also allows pipes to...

Locking Pins have double acting design.

Activated by push or pull motion, Kwik-Lok(TM) Double Acting Pins feature corrosion-resistant, solid stainless steel construction and are suited for quick insertion and removal. Products are offered with ring, L, and T handles, and 4 ball configurations are available upon request. Ring is included for attachment of optional lanyard. Standard sizes range from 3/16-1 in. for nominal pin diameters,...

Fittings suit agricultural water applications.

Offered in sizes up to 12 in., Agri-Lock fittings and couplings provide quick-disconnect capability for non-hazardous applications. Suited for agricultural suction and discharge of water, as well as for irrigation and dewatering applications, products are made of galvanized steel and feature ball-head design that allows for offset coupling. Pin-locking device is available to provide extra...

The Ultimate Guide To Hydra Pneumatic and Servo Cylinders

This white paper provides a guide to hydra pneumatic and servo cylinders.

Plugs and Connectors feature watertight construction.

Perma-TiteÃ-® 2 plugs and connectors, rated NEMA Type 4, 4x, 6p, and IP 66 and 67, are UL listed and CSA certified. Configurations are from 15-30 A, up to 600 V, single- and 3-phase, and devices withstand hose-down pressures up to 1,000 psi. Color-coded, cord-grip bushings accommodate various cable diameters. Elastomeric housing has ergonomically designed finger grips and resists impact,...

Roller-Screw Assemblies withstand demanding applications.

Series NRS Planetary Roller Screw Assemblies feature high axial resolution with multitude of contact points for carrying large loads. Units operate under shock loads and adverse environmental conditions, with poor lubrication, and after ingesting ice and sand. Assemblies feature nuts with threaded rollers, which are available with integral flange or as cylindrical nut in split preloaded, or...

Pillow Blocks suit confined area applications.

GRAPHALLOYÃ-® 845PTB series, available for conveyors with closely spaced rolls or other confined area applications, has self-aligning design and is available in Ã-½-2 in. shaft sizes. Self-lubricating products interchange with most ball bearing pillow blocks and work in temperatures from -400 to +1,000Ã-

Earplugs are offered in corded version.

Matrix(TM) Earplugs features uniform attenuation profile that filters harmful noises out while allowing voices and warning signals to pass through. Suited for use in process industries, products are manufactured from proprietary thermoplastic elastomer using dual-density foam manufacturing process. Center is tightly compacted and denser than outer portions, providing lateral resistance when...

Actuator and Ball Spline come in mini and micro sizes.

Measuring 65 mm wide, Mini Actuator Type RDM reaches speeds of 5 m/s and accelerations of 9 G. At 10 mm/s, speed ripple is less than 11%. Max thrust power is 59.7 N, and continuous thrust power is 8.0 N. Micro Ball Spline Type LT features 2 gothic grooves and low rolling resistance that allows for increased stability. It is suited for harsh environments, as nut, shaft, and balls are all...

Ceramic Guides and Ball Spline suit medical applications.

Ceramic LM Guide Type RCR, Ceramic LM Guide Type RSR, Ceramic LM Guide HCR, and Ceramic Ball Spline LT use ceramic rails, blocks, and, in most cases, ceramic balls. This contributes to non-magnetic characteristics, increasing application potential. Products are suited for use in medical equipment and semi-conductor manufacturing equipment. They reduce weight of overall product and eliminate...

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.