New Fluid & Gas Flow Equipment Products

Ball Valves are made of polypropylene.

Multi-port devices are available in two sizes: 3/4 in. true-union and 2 in. valve. Three position settings are available: bottom-to-right, bottom-to-left, and off. They have Teflon(R) seats and EPDM O-rings, with viton kits available on request. Valves are pressure rated at 125 psi @ 70 deg F.

Spring Cylinders have threaded body style.

Universal Spring Cylinders have thread sizes that conform to standard devices, such as miniature shock absorbers or hydraulic clamp cylinders. Hardened steel plunger has tapped hole and pilot bore on compression end and threaded extension on tension end. Optional retracting lock can be used on threaded and non-threaded styles. When partially or fully extended, lock aids in preventing rotation of...

Compressor operates quietly.

Series 6025 oil-less, linear devices provide maximum continuous and restart pressures up to 4.0 psi, maximum intermittent pressure up to 5.5 psi, maximum vacuum up to 7.5 in. Hg, and maximum flow of 1.5 cfm. Series is available in pressure and pressure vacuum models, and for 60Hz/50Hz operation. Quiet operation eliminates need for sound insulation and low pulsation eliminates need for pulsation...

Sanitary Hose has matched fittings.

Platinum-cured silicone hose and matched stainless steel fittings provide convenient transfer of fluids. Hose is quickly assembled, fittings are completely reusable, and all meet relevant USDA, FDA and 3-A requirements. Hose is available in 4-ply, polyester-reinforced versions or with stainless-steel wire reinforcement. Stainless-steel couplings are fully traceable, crevice free, and suited to...

Grips and Handles - Providing a Strong and Comfortable Grip

To learn more about the different types of Grip and Handle options available or which to select for your specific application, download our product guide.

Hydraulic Pumps offer hand or foot operation.

Models PA91 and PA95 air-over-oil pumps provide portable power for cylinders and hydraulic tools. PA95 provides up to 70 cu in. of flow in low pressure stage and 10 cu in. @ 10,000 psi. All metal construction and reduced motor noise make it suitable for indoor use. Pressure relief valve protects hydraulic circuit from damage, and 3-position treadle provides advance, hold, and retract operation.

Tubing Pump delivers high volumes.

Ismatec(R) Flowmaster FMT300 provides one-channel pumping processes with flow rates from 37 to 13 L/min. IP65 rated for dusty, humid or corrosive environments, or clean room areas. Applications include dispensing and filling in biotechnology, pharmaceutical, and food and beverage industries, or pumping harsh chemicals and abrasive fluids in chemical processing. Pump head disassembles and...

Valves allow in-line service.

Bronze and Stainless Steel Valves control flow of deionized water, ammonias, vegetable oil, fuel oil, gas, steam, solvents, cryogenics, and oxygen. They feature packless construction with continuous coils for all voltages. All internal parts can be inspected, cleaned, or serviced while valve body remains in pipeline. Bronze valves from 1/4 to 3 in. and stainless steel valves from 1/2 to 2 in. are...

Refrigeration Valves suit CO2 service.

Refrigeration valves include control valve sizes from 3/4 to 6 in., shut off valves from 3/8 to 16 in., and technical equipment for CO2 service. Valves are tagged and painted yellow for identification purposes. Rated to 600 psig, valves offer regulator setting range to 550 psig. Temperature Range is from -65 to 240 deg F. Pressure regulator (3/4 in.) is available with 25% and 50% V-ports for...

Gravity Filtration System works unattended.

Automatic Gravity Filtration System is designed to filter intermittent or continuous, high or low flows with constant or varying, heavy or light contaminant loads. Models are available from 16.5 to 1.5 sq ft of filtration surface. Automatic indexing fabric filters are suited for filter grinding swarf, machining oils and coolants, cooling tower water, industrial wastewater streams, and water wall...

Filters are available with optional large-tube body.

AFR Series design replaces multiple valves found in systems with single rotating diverter. Actuator design provides more power and torque than original AFR, and is rated for more rotations. Optional 6 in. tubes enable unit to address filtration at low retentions and high flows. They are suitable for flow capacity at low, flow-restricting retentions of less than 100 microns.

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.