New Mechanical Components and Assemblies Products

Ball Screws suit linear actuation applications.

Featuring internal recirculation system design, Inch Series precision ground ball screws can be used to lift, lower, pick-and-place, and perform positioning operations for computer-controlled equipment. Non-tube internal return design incorporates balls in each circuit removed from raceway and returned to it by solid metal deflector pins. Series ranges in size from 3/8-6 in. diameter with leads...

Steel Indexing Plunger is offered with threaded body.

Non lock-out type steel Indexing Plungers are available in inch and metric sizes. With steel, black oxide finish threaded body, plunger pin is steel, hardened and ground. Knob is matte black glass fiber-reinforced nylon plastic, while lock nut is steel with black oxide finish. Plungers offer 2 retracting strokes per plunger diameter, while nylon plastic hand knob has maximum heat resistance of...

Cantilever Slides are offered in 25 mm bore size.

Available in 6 bore sizes from 8-32 mm, Series SxL and SxH slides feature compact design with twin switch slots. Series SxH has precision-machined TC fluoropolymer composite bearings and comes in travel lengths to 8 in., while Series SxL features self-lubricating polymer bearings and comes in travel lengths to 3 in. Units are available in imperial and metric versions with internal and external...

Setting Blocks cushion and support glass.

Setting Blocks protect glass against vibration and shock from handling, shipping, and wind loads. Available with or without pressure-sensitive adhesive, blocks elevate and isolate insulating glass units from sash. Neoprene material makes blocks resilient, allowing glass unit to handle stressed conditions. Offering temperature range of -20 to 170Ã-

The Ultimate Guide To Electro-Mechanical Assemblies & Box Builds

This ebook provides an in-depth guide to electro-mechanical assemblies and box builds.

Lamination Press Pads provide temperature stabilization.

PACOPRESS(TM) Press Pads control and retard heat delivered to press load. They also equalize pressure distributed across panel while laminating and pressing high- and low-pressure decorative and industrial plastic laminates. Able to be reused minimum of 20 times each, products are available in rolls up to 60 in. wide or as custom-cut sheets. Dust-free pads do not produce noxious odors during...

Grounding Coupling works with 5-15 hp NEMA motors.

Aegis(TM) Shaft Grounding Coupling prevents electrical damage to bearings of AC motors with variable frequency drives by safely passing harmful shaft current to ground. With Electron Transport Technology(TM), coupling provides virtual short between shaft and motor frame that keeps shaft current and voltage from building up. It provides cleanroom-quality bearing isolation with dust-proof seal that...

Liquid Injection Molding can handle large parts.

To support molded silicone rubber requirements that would typically exceed those for liquid injection molding (LIM) processing, LIM manufacturer offers shot size of 380 g and platen designs for injection molded gaskets up to 12 x 12 in. or 8 x 20 in. LIM silicone withstands temperatures from -100 to +450Ã-

Silicone Foam Gaskets and Pads handle extreme temperatures.

Silicone foam gaskets and cushioning pads, supplied in custom die cut, water jet cut, and slit-to-width configurations, are produced from liquid silicone rubber technology. Various grades are flame retardant to UL94V0 and UL94HF-1, and products are offered in 6 compression-force deflections from 0.75-18 psi and thicknesses from .032-1.0 in. They are suited for use as shock and cushioning pads in...

Non-Spill Coupling is suited for medical applications.

For applications requiring medical grade quality and gamma sterilization, NS4 ABS Series is made from acrylonitrile butadiene styrene (ABS) material and features non-spill shut-off valve. It provides single-click connection and incorporates thumb latch for secure, single-handed operation. Terminations include 3/8 in. OD PTF compression; 1/8, Ã-¼, and 3/8 in. ID hose barb; and Ã-¼ in. male...

Molded Silicone Products suit aseptic applications.

Molded Silicone Components include stoppers and sealing systems for carboys and vessels, bottles, laboratory equipment, and process and storage containers. Made from Class VI, platinum-cured silicone elastomer, chemical-resistant products have smooth, gap-free surfaces and no taste or odor transfer. Autoclavable, sterilizable, and reusable components resist cracking and particle migration, are...

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.