Latest TED40x2 Control Damper Comes with Insulated Airfoil Blades
The TED40x2 Insulated Control Damper is offered in double-edge blade seal design and the seals are mechanically locked in extruded blade slots. The unit when closed, traps a minimum of 4 in. of dead air space between the double blade assembly. The damper features a thermal break between frame sections that prevent heat transmission through the frame.
Read More »
Smooth and Worry-Free Production
mayr® power transmission presents backlash-free servo couplings for all drive constellations and reliable braking systems for vertical axes at the AMB 2018 in Stuttgart. Precision, productivity, availability – machine tools must fulfil high expectations. Cycle rates and working speeds are increasing, tolerances are decreasing. Even the smallest programming and operating errors or operating...
Read More »
Smooth and Worry-Free Production
mayr® power transmission presents backlash-free servo couplings for all drive constellations and reliable braking systems for vertical axes at the AMB 2018 in Stuttgart. Precision, productivity, availability – machine tools must fulfil high expectations. Cycle rates and working speeds are increasing, tolerances are decreasing. Even the smallest programming and operating errors or operating...
Read More »
New GN 565.7 Cabinet U Handles Come with 35 Degrees Angled Contact Surface
Winco’s GN 565.7 Stainless Steel Angled Cabinet U Handles are produced from profiled aluminum extrusions. The units are RoHS compliant and are matte shot-blasted with tapped holes for mounting from the back. The 35° angled contact surface improves accessibility even in tight spaces.
Read More »
Glass vs. Plastic: Benefits of Using Glass Components in Biotechnology, Medical Device, Point-of-Care & Pharmaceutical Industries
This white paper from Accu-Glass outlines the various properties that make glass such an attractive option for a diverse range of medical-related applications.
Read More »
New GN 565.7 Cabinet U Handles Come with 35 Degrees Angled Contact Surface
Winco’s GN 565.7 Stainless Steel Angled Cabinet U Handles are produced from profiled aluminum extrusions. The units are RoHS compliant and are matte shot-blasted with tapped holes for mounting from the back. The 35° angled contact surface improves accessibility even in tight spaces.
Read More »
New BNS-V Ball Screw/Spline Enables Quick Starts and Stops During High-Speed Operation
The BNS-V Ball Screw/Spline comes with ø72 outer diameter, inertia of 2.00kg•cm² and weight of 1.00 kg. The unit features a rigid shaft support and an angular-contact structure. The ball screw and ball spline nuts feature dedicated support bearing directly embedded on the circumference of the nuts.
Read More »
New BNS-V Ball Screw/Spline Enables Quick Starts and Stops During High-Speed Operation
The BNS-V Ball Screw/Spline comes with ø72 outer diameter, inertia of 2.00kg•cm² and weight of 1.00 kg. The unit features a rigid shaft support and an angular-contact structure. The ball screw and ball spline nuts feature dedicated support bearing directly embedded on the circumference of the nuts.
Read More »
Custom MMIC Introduces New Low Noise Amplifier and Phase Shifter with 50 Ohm Matched Design
Custom MMIC adds CMD270P3 and CMD174 to its LNA and phase shifter portfolio. The CMD270P3, 4-8 GHz amplifier is offered in 3 x 3 mm plastic surface mount package. The amplifier delivers a gain of greater than 16 dB with corresponding output of 1 dB compression point of +18 dBm and a noise figure of 1.7 dB. The CMD174 phase shifter is operated in 3 to 6 GHz and offers 0 to 360 degrees of monotonic...
Read More »
Custom MMIC Introduces New Low Noise Amplifier and Phase Shifter with 50 Ohm Matched Design
Custom MMIC adds CMD270P3 and CMD174 to its LNA and phase shifter portfolio. The CMD270P3, 4-8 GHz amplifier is offered in 3 x 3 mm plastic surface mount package. The amplifier delivers a gain of greater than 16 dB with corresponding output of 1 dB compression point of +18 dBm and a noise figure of 1.7 dB. The CMD174 phase shifter is operated in 3 to 6 GHz and offers 0 to 360 degrees of monotonic...
Read More »
New Adapter Kits Facilitate More Efficient Lifting
Stertil-Koni's two newest adapter kits are engineered for improved efficiency in bus and truck support. They provide more efficient lift by engaging the front and rear lifting points on buses and trucks, offering support for a larger range of axles. One of the new adapters ktis has been engineered expressly for transit buses, while the other is capable of supporting both trucks and school buses....
Read More »
Precision Fabricating with Over 40 Years of Experience
Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.
Read More »
