Machinery & Machining Tools

Linear Motor Positioning Stage allows multi-axis motion control.
Positioners

Linear Motor Positioning Stage allows multi-axis motion control.

Multi-headed linear motor positioning stage, intended for applications requiring independent control of multiple axis onÂ- single plane, is assembled on single piece of aluminum extrusion and driven by independent brushless linear motors. Guided by precision recirculating linear ball bearing blocks on single rail, motors share same magnet track and encoder scale. Each...

Read More »
Scissor Lift and Rotate System offers 2,000 lb capacity.
Lifts

Scissor Lift and Rotate System offers 2,000 lb capacity.

With Scissor Lift and Rotate System, users can raise cart containing pallet to proper height while placing product onto pallet and turning cart 360°. System is built with rotate bearing attached to platform below lift, with 4 mounting holes for securing to floor. Heavy-duty bearing can withstand load slamming from forklift trucks. For safety, system offers bolt-on bellows skirt to protect...

Read More »
Mate Precision Tooling is Pressing Forward with Its Newest Tooling Solutions
Dies

Mate Precision Tooling is Pressing Forward with Its Newest Tooling Solutions

SEE MATE AT: Fabtech 2014, Atlanta, GA, USA, Nov 11-13 Booth B3301 EuroBlech 2014, Hanover, Germany, Oct 21-25 Hall 12, Stand D80 Metalworking and CNC Machine Tool Show 2014 Shanghai, China, Nov 4-8 At FABTECH 2014, Booth 3301 See Mate’s New Line Of Press Brake Tooling, Punch Press Tooling And Laser Consumable Products Anoka, Minnesota: FABTECH 2014 begins at the Mate Precision Tooling exhibit...

Read More »
New ClassOne Electroplater a "Sellout" at SEMICON
Plating Machinery

New ClassOne Electroplater a "Sellout" at SEMICON

First Solstice System Goes to Washington Nanofabrication Facility KALISPELL, Mont.,Â-  -- When ClassOne Technology introduced its new Solstice(TM) electroplating systems at SEMICON West last month they didn't expect to actually sell their first production unit off the show floor, but that's what happened. The company reported that the Washington Nanofabrication Facility (WNF) at the...

Read More »
PIRTEK Offers a Whip Check System as a Safety Measure for Equipment Operators
Cable Clamps

PIRTEK Offers a Whip Check System as a Safety Measure for Equipment Operators

Safety is always the primary concern when operating hydraulic equipment and machinery. If an end fitting becomes disconnected from a high pressure hose the release of energy contained inside can cause serious injury to anyone operating or working on the equipment. The Whip Check System offered by PIRTEK is a retention system designed to restrain the hose from the Whipping Effect" created by the...

Read More »
Laser Material Processing System utilizes hybrid technology.
Plasma / Flame / Laser Cutters and Cutting Machinery

Laser Material Processing System utilizes hybrid technology.

Suitable for cutting, marking, and engraving of both organic and inorganic materials, XLS10MWH Multiwave Hybrid™ System combines laser energy from CO2 lasers of 9.3 or 10.6 microns and fiber laser of 1.06 microns into simultaneous delivery of single beam. Control of lasers individually or simultaneously provides infinite laser energy combinations for development of laser material processes....

Read More »
Automatic Hitch Feed Saw offers fully programmable operation.
Saws

Automatic Hitch Feed Saw offers fully programmable operation.

With 30 in.Â- linear actuator driven by servo motor and 315 mm blade, CPO 315 HFA-CNC can cut up to 3 ½ in. dia tubes or pipe and up to 1 ¾ in. solid material while maintaining length tolerance of ±.006 in. per index. Users can program to set length with number of pieces to cut or enter up to 4 separate...

Read More »
Metcal to Exhibit the Dual Use MX-5200 Rework Series at the SMTA Capital Expo
Soldering Machinery

Metcal to Exhibit the Dual Use MX-5200 Rework Series at the SMTA Capital Expo

GARDEN GROVE, CAÂ- – Metcal is pleased to announce that it will highlight the MX-5200 Soldering, Desoldering and Rework Series at the SMTA Capital Expo Tech Forum, scheduled to take place Tuesday, September 9, 2014 at the John Hopkins University/Applied Physics Lab in Laurel, MD. The MX-5200 Series offers the same increased productivity and process control as the MX-5000 Series with...

Read More »
General's Crown King Named among Top 100 Best New Products of 2014
Jigs

General's Crown King Named among Top 100 Best New Products of 2014

As Chosen by Professional Remodelers Remodeling Enthusiasts New York, NYÂ- — Readers of Professional Remodeler magazine have chosen the Crown King crown molding jig from General Tools Instruments (General®) as one of the Top 100 Best New Products of 2014. General’s Crown King is one of just seven products to receive this recognition in the Construction Tools Equipment category....

Read More »
High Power and High Speed Together in a Vertical Milling Machine.
Milling Machines

High Power and High Speed Together in a Vertical Milling Machine.

Manufactured by Jobs (Piacenza, Italy), JomaX is a family of big, high-power milling centers with a configuration of both vertical and horizontal axes. The features of JomaX machines improve the competitiveness of our customers in many different fields: from precision machining to heavy mechanics, such as the manufacturing of mold holders, large sized molds or large structural parts in titanium,"...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers