New T2713 Indexable Thread Mill Handles Different Thread Pitches and Lengths
Features modular tool body with Capto™ C8 interface for large threads and long overhangs. Suitable for a variety of materials up to 55 HRC. P26300 thread milling inserts for machining thread diameters starting at M125 with a thread pitch between 6-10 mm or UN5 in. with a thread pitch of 4 TPI.
Read More »
New TC620 Thread Milling Cutter from Walter Offers Fast Machining Time and Higher Tool Life
Suitable for thread depths of 2 and 2.5 × DN in the dimension range from M4 to M20 as well as UNC 8 to UNC ¾. Combines fast machining time with high tool life, superior process reliability, and easy handling. Comes with multi-row concept with lower cutting forces that reduces machine time and wear.
Read More »
Kennametal Presents Mill 4-12KT Tangential Shoulder Mill for All Steel and Cast Iron Applications
Features mounted inserts with four cutting edges per insert and shallow pocket design. Available with seven corner radii from 0.4 mm to 3.1 mm with an axial depth of cut range from 0.5 to 12mm. Offered with triangular-shaped margin design.
Read More »
New ZGF-S-Cut Solid Thread Mills Feature Multi-layer TiAlN T46 Coating
Produces precise threads in exotic materials including Inconels, nickel based superalloys, monel, titanium and 420 stainless steel. Available in 2xD lengths as well as have coolant-fed options starting at 1/4" diameter. Offered in inch sizes ranging from No.2 or M3 through 7/16 or M10.
Read More »
How to Effectively and Efficiently Clean Heat Exchangers, Part I
An introduction to a three part series about the importance, benefits, and methods of cleaning heat exchangers.
Read More »
Thread Milling Cutters can cut multiple pitches.
Offered in T2711and T2712 models, Thread Milling Cutters are used for machining UNC, UNF, M and MF thread sizes starting at 24 mm. Units are suitable to cut any pitch between 6-18 TPI. Allowing users to machine multiple thread sections simultaneously, unit’s enhanced insert and body allows cutting of M56 and M64 coarse-pitch threads.
Read More »
Thread Milling Cutter can machine materials up to 55 RC.
Available in T2711 and T2712 models, Thread Milling Cutter is suitable for machining threads of 1 in. diameter and above. Offering easy-cutting geometry, wear-resistant and universal grade WSM37S, unit is used for thread depths up to 2.5 DN and pitch range of 8-18 TPI for UNC and UNF thread styles. Ideal for ISO P, M, K, S and H, product can machine multiple thread sections.
Read More »
Solid Carbide Thread Mills come in 3XD sizes for max reach.
Used in aerospace, defense, and medical industries, 3XD THREADS-ALL Tools enable machining ofÂ- difficult-to-cut materials such as stainless, titanium, and inconel. Tools provide single solution for through and blind holes and offer full bottom threading to within one pitch. With 8 stock standard tool sizes of #10, ¼, 5/16, 3/8, 7/16, ½, 5/8, and ¾, ZGF-I 3XD Thread...
Read More »
Seco to Spotlight Latest Tools for Oil and Gas Applications at HOUSTEX
TROY, Mich.Â- — At HOUSTEX 2015 in booth 441, Seco Tools, LLC will highlight its latest threading, milling and turning cutting tools made to handle the extremely tough machining requirements of the oil and gas industry. The company’s applications experts will also be available to help attendees find ways to optimize their production processes via these new tools. The show takes place...
Read More »
Seco to Highlight New Tools Developed Around Modern Materials at IMTS 2014
TROY, Mich.Â- – At IMTS 2014 in booth W-1564, Seco Tools, LLC will unveil several new milling, turning, threading and tool holding products that were developed with material advancements in mind, including a square shoulder cutter that enhances side-milling operations, a multi-edge system that meets the industry's demand for narrow cutting-edge grooving and parting-off tools, an insert...
Read More »Top Performance Tapping Tools
Fair Lawn, N.J. - From March 1st 2012 Sandvik Coromant will offer a full program of thread tapping tools for easy selection and use. The CoroTap tools are for optimized productivity in each ISO material and the Spectrum Tap tools are for reliable performance across a multitude of workpiece materials. CoroTap From the CoroTap range a number of benefits are expected, including high productivity and...
Read More »
Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »
