Machinery & Machining Tools

Electric Pipe Beveling Tool end preps where air isn't available.
Machinery

Electric Pipe Beveling Tool end preps where air isn't available.

Able to perform any angle of prep, including compound bevels and J-preps, ESCO MILLHOG® Mini Electric Pipe Beveling Tool features 1,800 W, 110/230 Vac, 40–60 Hz motor and self-centering draw rod mechanism that rigidly mounts intoÂ- tube or pipe ID. Portable tool utilizes wedge-lock blade locking system and pulls thick chip without oils. Suitable for boiler tubes and pipes...

Read More »
Five-Axis HMC targets manufacturers of small, complex parts.
Machining Centers

Five-Axis HMC targets manufacturers of small, complex parts.

Featuring rigid bed casting with 3-point leveling system, a51nx-5XU has tiered-column design. Linear X, Y, and Z axes are complemented by integral 5th-axis table with single casting design that houses and integrates B and C axes' twin direct-drive motors. Also included, work-pallet magazine simplifies pallet changes and offers standard storage capacity of 22 workpieces up to 300 mm dia x 300...

Read More »
Cutters and Cutting Machinery

Die-Cutting Machine automates in-line blank separation.

Capable of blank separating double- and single-cut cartons at full speed of 7,000 sheets/hr, NOVACUT 106 ER also allows users to run conventional non-blanked work using existing tooling. Machine's delivery section can be converted from single/double cut blank separating to full sheet delivery and back in seconds. Offering automatic locking and unlocking of tools, NOVACUT can process wide...

Read More »
Presses

Electric Press with Built-in Heater Plates

Fancort was approached by a well known government agency with a requirement for a very accurate, low force, assembly press that incorporated heater plates for compressing and heating semiconductor materials. The press was for RD, and had to incorporate extreme versatility to handle the broad range of materials they were working with. The customer was unable to find an off-the-shelf solution, and...

Read More »
Presses

Local Sheet Metal Fabricator Thrives through Recession!!

Technology drives ability to become a player in Contract Manufacturing! Rockford, Illinois - Since the Housing and Bank collapse of 2007 when the recession started LJ Fabricators Inc. a local Sheet Metal Job Shop has become a player in the Contract Manufacturing arena. With the acquisition of their second 4400w Bystronic Co2 Laser in 2007 sales have soared. Profits have been put back into capital...

Read More »
Plasma Cutting/Gouging System is designed for manual applications.
Chisels

Plasma Cutting/Gouging System is designed for manual applications.

Delivering 100% duty cycle at 200 A, PAK® 200i supports hand cutting up to 2Â-¾ in. on mild steel, as well as 10 ipm on 2 in. carbon steel, and will remove up to 25 lb of carbon steel per hour. Upon accidental tip-to-work piece contact, Tip Saver Plus feature folds back current to 35 A to ensure tip is not damaged. System can be configured to operate at 380–415 V, 480 V, or 400 V CE,...

Read More »
Force Sensing Package suits precision assembly applications.
Robots

Force Sensing Package suits precision assembly applications.

With 6-axis force sensor that can detect 3 translational forces and 3 axial moments, MotoFit™ alters robot's position based on force encountered to align/assemble parts. Touching, fitting, and inserting are combined to provide automatic precision fits of mating surfaces of 10–100 Â-µm. High-speed fits up to 20 mm deep with h7/H7 tolerance can be done in 5 sec. Additional components...

Read More »
Piezoelectrical System precicely positions microscope revolver.
Microscope Components

Piezoelectrical System precicely positions microscope revolver.

Mounted between objective revolver and microscope stand, MIPOS R120 allows operator to switch between lenses without changing setup. Parallelogram design and solid-state flexure hinges make unit free of mechanical play and eliminate any evidence of friction and stiction. Equipped with capacitive or strain gauge sensors, unit ensures resolution in nanometer range, repeatability, and stability....

Read More »
CAM Software affords gear and spline manufacturing flexibility.
Software

CAM Software affords gear and spline manufacturing flexibility.

InvoMilling™ v1.0 enables flexible manufacturing of gears and splines on universal 5-axis machining centers. Specifically, this solution generates CNC program to produce different gear profiles withÂ- limited range of standard-stocked precision tools. Graphics promote usability, while milling path generation and simulation functionality lend to operational flexibility.

Read More »
Turning Machinery

Shaft Turning Machine handles parts up to 22.4 in. long.

Equipped with MT5 tailstock center, Model ML400L provides automated turning of shaft parts up to 7.9 in. in diameter. Twin upper and lower turrets with roller support enable machine toÂ- reduce cycle times by pinch turning. Offering Live Tool option for small secondary holes, Model ML400L is also available with 1 or 2 turrets and Muratec high-speed 3-axis CNC gantry loader.

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics