
New X-417 Multi-axis Motion Sub-system for Precision Automation and Laser Processing
XY base system is made of two 3-phase motor powered V-417 linear stages with travel ranges from 204 to 407 mm. Granite base plate is available for stability and can hold the G-901 EtherCat-based controller with ACS driver module. XYZ system includes an L-412 high-load linear stage mounted vertically, providing 102 mm travel range.
Read More »
Robot Operating System Drivers Enhance PI Hexapod Functionality
The open source set of tools, software libraries, and rules aid in the development and control of 6-axis hexapod robot operations, newly available. December 2020, Auburn, MA – The Robot Operating System (ROS) by ROS.org is a flexible framework for robotics software development. PI’s release of ROS drivers is the company’s latest addition to its H-811 high performance hexapod 6-axis...
Read More »
New AU200-100x100 Alignment Stages Feature Resolution of 1 micron
Preloaded V-groove and crossed roller bearings contribute to the high precision and stiffness. Footprint is 348 x 348 mm and features large 188 x 188 mm open aperture. Ideal for alignment, inspection, assembly, laser drilling and machining applications.
Read More »
New XY Single Module Precision Linear Stage Comes with 2-Axis Precision Motion
Feature integrated XY stages that is engineered for higher loads and are available with 3-phase linear direct-drive motors and ball screws. Available with nanometer resolution linear encoders and are ideal for biotechnology, industrial automation, laser processing and flat panel display testing applications . Ball-screw variants can be powered by stepper motors and servo motors whereas...
Read More »
Top Design Engineering Considerations For Optical Assemblies
In this eBook, we provide an overview of the design engineering considerations to keep in mind when planning the manufacture of an optical assembly.
Read More »
New U-723 XY Stage Provides High Speed Motion up to 200 mm/sec
Provides 0.8” travel per axis with a footprint of 42x42mm (1.6x1.6”). Allows for integration into tight spaces. Offers fast step/settle performance.
Read More »
New AU200-170x170 Precision XY Stage Offers a Resolution of 20 Microns of Each Axis
The AU200-170x170 Precision XY Stage is offered in 458.5 mm x 458.5 mm footprint with a height of 108 mm and a repeatability and positional accuracy of 2 and 3 microns respectively. The unit is suitable for applications such as alignment, assembly, laser drilling, machine, semiconductor handling, testing, scanning and optical applications. It features a 300 mm x 300 mm size table and a precision...
Read More »
New IntelLIDrives Dual-Axis XY Stages Offer Repeatability of 10 micron
Dual-Axis Large Aperture XY Stages from IntelliDrives are available with stroke of 100, 200 and 300 mm with apertures of 188, 288 and 388 mm. Units are used in scanning microscopy, wafer and printed circuit board inspection and automated assembly. The stages can be motorized with stepper motors and brush-less servo motors. Units provide fine positioning and control using stable closed-loop...
Read More »
PI Introduces Miniature Hexapod Features Removable Magnetic Kinematic Plate
PI’s H-811.F2 Miniature Hexapod is available in various sizes with base sizes ranging from 50mm to 1m. Unit offers 6 DOF, 5 nm actuator resolutions and 60 nm repeatability. Designed for industrial precision alignment applications, unit comes with low friction ballscrews, joints, user programmable pivot point and a controller with build-in multi-axis alignment routines. The hexapod provides...
Read More »
IntelLIDrives' XY Precision Stages Provide Repeatable Nanometer Scale Motions in X and Y Directions
XY Precision Stages from IntelLIDrives optimize elements such as orthogonality, straightness, and flatness. Unit is equipped with non-contact direct-drive technology in which the motor and encoders are directly coupled for eliminating backlash. The stages are suitable for applications such as disk-drive fabrication, fiber alignment, optical delay element actuation, sensor testing, laser...
Read More »
Medium Load H-825 6-Axis Hexapod comes with absolute encoders.
Medium Load H-825 6-Axis Hexapod comes with self-locking load capacity up to 30 kg. Unit offer linear motion up to 55 mm and up to 38 degrees rotation. Product features actuator resolution of 8 nanometers and provides position repeatability of ±0.1µm and ±2µrad. H-825 is equipped with state-of-the-art controllers and software tools. Hexapod is employed with parallel-kinematic design and is...
Read More »
Precision Machined Parts for High Tech Applications
For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.
Read More »