New Machinery & Machining Tools Products

Turbo Press Brake offers capacities to 350 tons.

Servo-controlled Series PPEB is offered in multi-axis configurations. Employing closed-loop variable pump technology, oil flow within hydraulic system is regulated to match programmed pressure of machine's cycle. Equipped with IntelÃ-® Pentium microprocessor and 2 GB hard drive, CADMANÃ-® PC-based control creates and stores interactive databases for bend allowance, angle corrections, and...

High Feed Milling Cutter suits die and mold industry.

TWINCUT Feed features 3-edge insert that maximizes chip thinning, resulting in feed rates up to 400 ipm. Unit runs at chip loads up to .125 in., and since it cuts at bottom of tool, as opposed to diameter, cutter can work at overhangs of 10 in. or more. TWINCUT Feed performs face milling, pocketing, and 3-D contouring in all steel up to 45Rc, 300, and 400 series stainless steels, and grey and...

Aluminum Handtruck combines functionality of 5 machines.

Model LE-1 acts as power stairclimber, tailgate lift, curb/dock leveler, motorized stacker, and balanced handtruck. This allows operators to power heavy loads off vehicles, over curbs, up stairs, and onto platforms or work benches. Operator can change load's center of gravity by pressing one button. Unit enables one man operation when moving loads up to 650 lb. It does 100% of lifting,...

Single Station System offers part deburring and cleaning.

Model EC-20-1 combines Electrolytic Deburring/Edge Finishing/Contouring system and Aqueous Cleaning system. Both are modular and constructed with stainless steel and non-corrosive materials. In combination, systems provide accurate deburred, edge finished or contoured parts that are aqueous-cleaned and dried. Multiple fixtures are provided for load/unload parts handling. Finished parts can be of...

Direct Drive Linear Motors for Food/Beverage, Medical/Pharma & Packaging Applications

This eBook provides an overview of how direct drive linear motors can be an essential part of an efficient design ensuring the equipment operates and performs as intended.

Machinable Collet turns delicate parts.

Usable with or without lathe collet closing system, machinable collets are suited for turning delicate parts. Knurled nut closes collet via internal taper, which engages matched taper on body of tool. Collet stem has .625 in. dia with machined Ã-½ in. hex on end of stem to allow for work set-up off machine in production situations. Products are available in steel or aluminum and have...

Terminating Machines speed crimping process.

Models AMP 3K/40 and AMP 5K/40 crimp reel-packaged electrical terminals, splices, and contacts to wire. Model AMP 3K/40 handles wire sizes from 32-14 AWG and is rated at 3,000 lb of crimping force, while Model AMP SK/40 crimps product to wire sizes of 32-10 AWG and is rated at 5,000 lb. Electrical requirements are 100-240 Vac, 50/60 Hz and 90-100 psi compressed air for use with air-feed...

Machining Center meets requirements of die mold industry.

Model HSC 500 machines electrodes in both graphite and copper, as well as pre-hardened materials. Bridge-style machine offers acceleration/deceleration rates of 8.5/secÃ-² and feed rates of 590 ipm. Linear scales are standard on all axes for accurate positioning. Thermally-chilled spindles achieve speeds up to 30,000 rpm with HSK40E tooling and 40,000 rpm with HSK32E tooling. Work envelope in...

Scissor cuts cable jacketing and light metal.

High Precision Scissor, Model 440 features cutting head that produces clean, square edge on variety of materials including PVC jacketing and photo-etched metal parts. Instead of finger-loops, plier-like tool has soft rubber handles and Light Touch return spring. Suited for assembly workers and field personnel who must repeatedly cut for entire shift, scissor features max cutting diameter of 20...

Machining Center machines electrodes from copper/graphite.

Bridge style HSC 500 machines electrodes in graphite, copper, and pre-hardened materials. Machine features linear scales on all axes, Heidenhain iTNC 530 control, and linear roller guides. With acceleration/deceleration rates of 8.5 m/secÃ-², unit achieves feed rates to 590 ipm and has max table load of 660 lb. Thermally-chilled spindles achieve speeds from 30,000-40,000 rpm, depending on...

Extrusion Die suits shear sensitive/low viscosity materials.

Design of Multiflow(TM) Cascade Extrusion Die provides identical shear history for all material processed, regardless of position across die. Distribution of material is accomplished by directing rather than restricting flow at various locations in die. Dies can be produced for strand, strip, round, or flat applications. They are also available for color striping or co-extrusion applications.

Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale

Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.