Machinery & Machining Tools

Tool Holders

MAPAL Relies on the Safe-Lock(TM) System from HAIMER

Igenhausen - Within a wide range of markets, such as the aerospace industry, cutting tools from MAPAL have successfully established themselves for high-performance machining operations like trochoidal milling. In order to offer users even greater protection against tools being pulled out of the chuck during machining operations, and to prevent damaging single workpieces or the machine itself,...

Read More »
Air Chuck Jaws offer alternative to OEM jaws.
Jaws

Air Chuck Jaws offer alternative to OEM jaws.

Available as blank top jaws in 1018 steel or 6061 aluminum, or pie shaped jaws using A360 aluminum, 6061 aluminum, or 1018 steel, Style M and Style R Air Chuck Jaws are suitable for all types of air chucks including Kitagawa-®, Northfield®, and Microcentric® brands. CNC machined for accuracy, pins serve as locator and allow precise repeatability plus fast installation.

Read More »
Air Chuck Jaws offer alternative to OEM jaws.
Jaws

Air Chuck Jaws offer alternative to OEM jaws.

Available as blank top jaws in 1018 steel or 6061 aluminum, or pie shaped jaws using A360 aluminum, 6061 aluminum, or 1018 steel, Style M and Style R Air Chuck Jaws are suitable for all types of air chucks including KitagawaÂ-®, Northfield®, and Microcentric® brands. CNC machined for accuracy, pins serve as locator and allow precise repeatability plus fast installation.

Read More »
Pneumatic Power Chuck offers accelerated clamping.
Chucks and Collets

Pneumatic Power Chuck offers accelerated clamping.

Self-contained ROTA TB2, used for machining rods and pipes, is available with through-hole of up to 560 mm. With air pressure of 6 bar, it is possible to achieve clamping forces of up to 280 kN. Base jaw guidance is equipped with seal to prevent penetration of contamination, and base jaws are optimized for minimal loss of centrifugal force. Sizes from 470–1,000 mm with bore diameters from...

Read More »
Coated Insert Grades are designed for cast iron turning.
Cutting Tool Inserts

Coated Insert Grades are designed for cast iron turning.

Optimized for toughness and wear resistance, TK1501 and TK0501 dedicated cast iron turning grades reduce tool waste and- maximize parts production per edge. Standard features include Duratomic® coating technology, EDGE INTELLIGENCE, and Chrome Used-Edge Detection. Latter facilitates identification of cutting edge contact with workpiece even in low-light environments. Various...

Read More »
Pneumatic Power Chuck offers accelerated clamping.
Chucks and Collets

Pneumatic Power Chuck offers accelerated clamping.

Self-contained ROTA TB2, used for machining rods and pipes, is available with through-hole of up to 560 mm. With air pressure of 6 bar, it is possible to achieve clamping forces of up to 280 kN. Base jaw guidance is equipped with seal to prevent penetration of contamination, and base jaws are optimized for minimal loss of centrifugal force. Sizes from 470–1,000 mm with bore diameters from...

Read More »
Coated Insert Grades are designed for cast iron turning.
Cutting Tool Inserts

Coated Insert Grades are designed for cast iron turning.

Optimized for toughness and wear resistance, TK1501 and TK0501 dedicated cast iron turning grades reduce tool waste andÂ- maximize parts production per edge. Standard features include Duratomic® coating technology, EDGE INTELLIGENCE, and Chrome Used-Edge Detection. Latter facilitates identification of cutting edge contact with workpiece even in low-light...

Read More »
Soldering Machinery

IBL Technologies Brings its Economy Vapor Phase Soldering System to the PHASE 4, Inc. Mini Show

BURNSVILLE, MN - July 2016 - IBL Technologies, LLC today announced plans to participate in the PHASE 4, Inc. Mini-show Technical conference, scheduled to take place August 9-11, 2016 at TechShop in Chandler, AZ. Jochen Lipp, CEO of IBL Technologies, will be available to demonstrate the redesigned SV260 Economy Vapor Phase Soldering Machine for small series and prototyping. The SV260 reflow vapor...

Read More »
Soldering Machinery

IBL Technologies Brings its Economy Vapor Phase Soldering System to the PHASE 4, Inc. Mini Show

BURNSVILLE, MN - July 2016 - IBL Technologies, LLC today announced plans to participate in the PHASE 4, Inc. Mini-show Technical conference, scheduled to take place August 9-11, 2016 at TechShop in Chandler, AZ. Jochen Lipp, CEO of IBL Technologies, will be available to demonstrate the redesigned SV260 Economy Vapor Phase Soldering Machine for small series and prototyping. The SV260 reflow vapor...

Read More »
Multi-Stroke Honing Machines suit small- to mid-volume operations.
Honing Equipment

Multi-Stroke Honing Machines suit small- to mid-volume operations.

For one-off and batch production, CM-2000- offers fully electronic semi-automatic or manual operation. Full servo control enables production of parts with 5 µ tolerance. For small-to-medium volumes, PH-4000 and PH-5000 deliver precision-controlled production honing. Every programming option is available for parts that need custom-stroke features, while fewer, more conversational...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics