New Fluid & Gas Flow Equipment Products

Protector Caps cover exposed ends to prevent worker injury.

Used around construction sites, PC-110 BarGardÃ-® caps protect workers from serious injury from exposed rods, rebar, pipe-end, and stems. They meet CAL OSHA Standards and fit Rebars No. 3-8, 3/8 to 1 in. dia. Products are bright lime green in color for visibility and withstand varied weather and temperature conditions. They install by slipping on and locking into place.

Portable Submersible Pumps suit limited-space dewatering.

Bibo BS 2102 and BS 2125, with respective diameters of 11Ã-½ and 14 3/8 in., can be used in tight spaces and inside small pipes. High-head BS 2125 develops up to 240 ft of head and delivers up to 240 gpm of liquid, while standard version pumps up to 850 gpm. Pumps feature 2 independent mechanical seals, abrasion-resistant tungsten carbide/carbon seals, and class H insulated motors that...

PTFE Hose is suited for harsh environments.

Series 300 Stainless Steel Overbraided PTFE Hose contains smooth core with low coefficient of friction. Inert core does not impart taste or odor to substances flowing through it. Core options include white, made from non-toxic ingredients that conform to FDA standards, or electrically conductive black. Both offer non-stick surface and low permeability. Service temperature ranges from -65 to...

Flow Control Valves offer dual metering capability.

Dual Metering Flow Control Valves are available in .187 and .281 in. diameter models with nominal weight of 1.5 and 5 g, respectively. Different metered flow rates for forward and reverse flow directions, within specific range, can be specified. All metal components are stainless steel.

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Side Access Filter Housing offers leak-free performance.

With compact design, 5P Glide/Pack-® air filtration housing accommodates 2 in. HVAC grade prefilter and 4 or 6 in. deep HVAC grade final filter. Fin seal on filter track limits leakage of unfiltered air across filter assembly to less than -½ of 1% at rated airflow. Neoprene door gasket and UV-resistant, star-style door handles ensure housing-to-filter seal. Unit's 16-gauge galvanized steel...

High Flow Relay features 1:1 ratio.

Type 79 relay uses rolling-diaphragm technology and pilot pressure to control output pressure over range of flow and supply variations. Supply and output ports are available in 3/8, Ã-½, Ã-¾, and 1 in. NPT. Pilot and output gauge ports are Ã-¼ in. NPT. Low-bleed and non-relieving versions are available, as well as tapped exhaust, supply gauge port, and external corrosive-resistant...

Breathing Air Systems meet OSHA Grade D requirements.

Series KBS Systems allow compressed air to be used as source of purified air. Portable units offer capacities of 10 scfm, and stationary units range from 12-880 scfm. Systems remove excessive moisture, dirt, dust, oil and oil vapor, carbon monoxide, and other hydrocarbons from compressed air to prevent worker health and safety risks. Options include switching failure alarm, carbon monoxide...

Evaporators suit industrial refrigeration applications.

Suited for industrial refrigeration applications, BAC Aircoil(TM) Evaporators incorporate hinged fan housings, aluminum or stainless steel drain pan construction, and integral coil/frame constructed of rectangular steel members. Housing materials are available in galvanized steel, stainless steel, or with BALTIBONDÃ-® Corrosion Protection System. They can be configured to meet performance...

Port Connectors suit 37-

ADACONN(TM) Port Connectors, when used with ADAFLANGE(TM) adapters and/or ADAFLANGEPORT(TM) adapters, give flexibility in plumbing compact SAE Four Bolt Flange connected systems without welding. Fluid is confined to inner bore where supporting wall thickness is greatest. Connectors are proof tested with Code 62 ADAFLANGE(TM) and ADAFLANGEPORT(TM) adapters to proof pressure of 18,000 psi and are...

Isolation Valves integrate with manifold assemblies.

Available in 2-way NC configuration, isolation valves employ elastomer diaphragms and are suited for control of corrosive and aggressive media. Able to be equipped with low-wattage (0.65 W min) coils, 2 valves may be combined on common base for 3-way operation. Custom manifold assemblies include fittings, tubing, and other accessories. Valves may be combined on manifold block to simplify...

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.