New Fluid & Gas Flow Equipment Products

Flat Air Nozzle offers adjustable force and flow.

Super 2 in. Air Nozzle has .015 in. air gap opening that is set with stainless steel shim positioned between body and removable cap. Air is released through thin slot across flat surface, resulting in wide, forceful stream of high velocity, laminar airflow. Air consumption is 21.8 scfm at 80 psig with noise level of 77 dBA, and force of 22 oz when mounted 12 in. from target. Force may be...

Grease Dispenser eliminates manual lubrication.

Streamliner V applies precise flow of grease to critical machine parts. It comes pre-filled in 250 cc reservoir and has variable feed rates of 1, 2, 3, 6, and 12 months with auto purge cut-out. Unit contains electro-chemical drive that produces inert gas, nitrogen, for operation. Unit can be deactivated and adjusted as necessary.

Forged-Body Needle Valve handles pressure to 10,000 psig.

Available in straight, 90Ã-

Membranes suit ultrafiltration and nanofiltration.

Kerasep Diamond(TM) filtering membranes resist abrasion and are suitable for clarification process of glucose syrups and extraction of fermentation broths. Multi-channel geometries make them compact and resistant to chemical constraints and aging. Manufactured with FDA-approved materials, membranes are available in cut-off sizes between nanofiltration and microfiltration.

Rack System Design & Buyer's Guide

There is plenty to consider before setting up or replacing storage rack systems in your warehouse. This whitepaper contains a guide and general checklist of the most important considerations.

Ball Valves are rated up to 1,000 psi.

Made from 316 stainless steel, high-pressure ball valves are available in 3/8-3 in. full port sizes for application in water, oil, and gas transmission and handling. They feature polished stainless steel balls, TeflonÃ-® seats and seals, and locking handle for safety. Replacement parts are available.

Medical Puller helps hospital workers position beds.

Measuring only 13 in. high, battery-driven ERGOtug MÃ-² slides under one end of bed, while automatic hitch slightly lifts 2 of bed's wheels off ground. Operator can reposition bed using controls on handle to turn, stop, back up, or go forward. ERGOtug MÃ-² can remain attached to bed frames during transport in elevators. It offers load capacity up to 1,800 lb and maximum speed of 4.5 fps.

Submersible Leachate Pump withstands harsh environments.

SurePump provides liquid level reading for horizontal side slope risers, vertical sump applications, and small diameter wells. Completely sealed, stainless steel unit draws liquid over or past motor to maximize cooling. For side slope risers, pump installation is facilitated by wheeled design, ensuring at least 4 wheels are in contact with riser pipe at all times. Submersible level sensor is...

Clog-Resistant Nozzles provide droplet control.

Variable Coating Nozzles deliver batch production cycles lasting up to 18 hours, depending on liquids being processed. They offer independent and remotely controlled spray widths, atomizing air and flow of liquids. Air Cap Cylinder helps eliminate clogging by sucking out excess coating spray around nozzle tip. With orifice diameters sized from 0.8-2.5 mm, nozzles feature 319 SS wetted parts and...

Valve Assemblies replace multiple valve installations.

Kenmac series double block-and-bleed valves provide smooth transition from process to instrumentation systems. Each one-piece forged body incorporates primary isolation valve and various secondary block-and-bleed valves. Available in sizes from Ã-½-2 in., flanged connections are manufactured to ASME 16.5 RF and RTJ. Valve is rated to temperatures from -50 to +400Ã-

Manifold Assemblies simplify control valve installation.

Suited for deployment in systems that require gang mounting of solenoid valves, KIP manifold assemblies can integrate system components such as pressure switches, check valves, regulators, and gauges into one package. Maintenance or replacement of valves is accomplished by unplugging valve, and user does not need to disconnect pneumatic plumbing. Manufactured in materials such as brass, aluminum,...

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.