New Electronic Components & Devices Products

pH Electrodes utilize drift-free reference system.

Available in rugged and standard glass bulb, flat-surface, semi-micro, and epoxy-bodied styles, ROSS Ultra(TM) pH electrodes use virtually drift-free reference system that is unaffected by temperature or composition. ROSS Ultra half-cell reference electrodes are also available for applications where separate sensor and reference electrodes are preferred.

Connectors are pre-insulated and UL listed.

ClearChoiceÃ-® NIMBUS(TM) Connectors are offered in single-sided and dual-sided, multi-tap models, as well as in-line or offset splicer-reducer configurations. Dual rated for copper or aluminum conductor, connectors feature removable plugs for entry-port closure.

Programmable Converter reads 8 x 8 array of photodiodes.

Model TCS230 programmable color light-to-frequency converter combines configurable silicon photodiodes and current-to-frequency converter on single monolithic CMOS integrated circuit. Output is square wave with frequency directly proportional to light intensity. Full-scale output frequency can be scaled by one of 3 preset values via 2 control input pins. Unit communicates directly with...

Connector System joins dual monitors.

Model DMS-59(TM) connects multiple digital and analog monitors to low-profile PCI and AGP graphic cards. Product incorporates LFH(TM) (Low Force Helix) contacts and voided pin, used as keying mechanism. Meeting VESA(TM) requirements for impedance, cross-talk, and skew, system consists of 59-circuit receptacle and cable plug adapter. Unit may be connected to 2 DVI-D receptacles, 2 VGA receptacles,...

PCB Fabrication Notes Guide

The overall purpose of your fabrication notes is to enhance Design for Manufacturability for optimal PCB fabrication and assembly while maintaining applicable industry standards and regulations.

Mezzanine Connectors feature plated plastic housing.

Plateau HS Mezz(TM) Connectors support differential data rates in excess of 10 Gigabits/sec. Designed for stack heights from 9-25 mm, connectors feature SMT differential pitch and 2 points of contact on each signal interface. Plated plastic housing provides full shielding of each pair of differential contacts. Molded plated pegs on housing facilitate attachment to PCB ground plane. Applications...

Fiber Array Packages feature small beam diameter.

FAP(TM) 400 Series consists of 8 W, 808 nm FAP and 8 W, 980 nm FAP. Both deliver light via 400 Ã-µm diameter multimode fiber bundle, and have typical operating current of 12 A. They operate at less than 2 V and feature typical numerical aperture of 0.14. Units include aiming beam fiber within fiber bundle. They are suitable for medical and direct-diode material processing applications.

Host Connectors are suitable for XFP standard modules.

Right-angle SMT Host Connectors, for 10 Gigabit XFP Small Form Factor Pluggable Modules, feature 0.8 mm pitch, 30-position design. They are suitable for connecting switches, routers, and other storage equipment. Both XFP modules and host system are hot-pluggable.

Fiber-Optic Switch allows use of 2 separate ports.

QuickSwitch 4185 Fiber Optic Switch/Converter allows user to access 2 separate fiber-optic 100 Base FX ports from 100 Base TX Fast Ethernet port. Fiber optic/twisted pair copper conversion is built in and unit is compliant with 802.3u 100 Base TX/FX standard. Ports A and B are 1300 nm, SC Duplex, Multimode, 100 Base FX fiber optic ports. COMMON port is 100 Base TX Fast Ethernetport. Front-panel...

Ethernet Blade converts copper link to fiber link.

INTELLAPATCH Switches with multi-rate Ethernet functionality enable cable management, failover, and security applications. Blade provides ability to convert incoming copper link to fiber link, and vice versa, and supports Ethernet, Fast Ethernet, and Gigabit Ethernet over copper simultaneously. INTELLAPATCH switches, outfitted with 10/100/1000 Ethernet blade, provide non-blocking, any-to-any...

Stainless Steel Mixers produce uniform emulsion.

Aqueous Mixers blend chemicals with water automatically for uniform emulsion at any proportion. All-metal units have no moving parts and require plant water line pressure of 25 lb. Fingertip control allows fine adjustment of mixing ratios from 3:1 to 100:1. Models are offered in stainless steel, brass, or nickel-plated and are rated at 3 or 10 gpm. They accommodate 5 gal pails, and 15, 30 or 55...

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.