RF Attenuators

Digital Attenuator features 50 Ohm SMA female connectors.
RF Attenuators

Digital Attenuator features 50 Ohm SMA female connectors.

Capable of bidirectional fixed attenuation, swept attenuation ramps, and fading profiles, Digital Attenuator comes with USB type-B female connector. Operated from -10°C to 50°C temperature range, unit is suitable for fading simulation, MIMO, DVB and WiMAX applications. Providing 50 ohm impedance, product offers 120 dB of control range and VSWR of 1.3:1. Embedded with programmable GUI...

Read More »
RF and Microwave Modules facilitate rapid prototyping.
RF Attenuators

RF and Microwave Modules facilitate rapid prototyping.

Featuring fully integrated, hermetically sealed design, HMC Series Modules shorten proof-of-concept phase of design cycle- and help minimize overall in-house technical support needed to assemble, test, and validate design. Series includes: HMC-C582 ultra-wideband power amplifier module ranging from .01–20 GHz; HMC-C583 single pole single throw switch module ranging from 0.1–40 GHz; HMC-C584...

Read More »
RF Attenuators

EXFO Launches Agile NEMs Infrastructure Solutions for end-to-end Manufacturing Coverage

New power meter, variable attenuator and switches combining next-generation chassis and industry's unique, web-based multi-user interface ideal for network equipment manufacturers QUEBEC CITY - EXFO Inc. (NASDAQ: EXFO) (TSX: EXF) announced today its latest agile solutions for network equipment manufacturers (NEMs), which include new power meter, variable attenuator and switches, all...

Read More »
Voltage Variable Attenuators provide 60 dB attenuation.
RF Attenuators

Voltage Variable Attenuators provide 60 dB attenuation.

Available in 6 models covering octave broadband frequencies from 400 MHz to 18 GHz, Voltage Variable Attenuators are suited for use with variable gain amplifiers, power level controls, and feed-forward amplifiers. PIN diode-based devices provide broadband flatness where output level can be adjusted continuously by varying analog voltage on input control line. With CW input power rated up to +23...

Read More »
Programmable Digital Attenuator features 0.1 dB step size.
RF Attenuators

Programmable Digital Attenuator features 0.1 dB step size.

With attenuation range of 120 dB and 0.1 dB step size, LDA-602EH Lab Brick Digital Attenuator allows for both precision and accuracy during fading tests or device characterizations. Unit features 15 -µs switching speed, max RF input of +28 dBm, and operating temperature of -30 to 50°C. Used with any PC or laptop computer with USB 2.0 port and Windows OS, RoHS-compliant device operates with low...

Read More »
RF Attenuators

X-Band MPAC-Beamforming Device covers 8-12 GHz range.

Designed for X-band radar applications, UltraCMOS® PE19601 integrates- 6-bit digital step attenuator, 10-bit digital phase shifter, RX/TX switching, and digital serial interface on 2.6 x 4.65 mm bare wirebond monolithic die. Monolithic phase and amplitude controller (MPAC) solution, consuming 0.001 mA, offers >40 dBm IIP3 linearity, 50 dB isolation, 17 dBm power handling. Device...

Read More »
New Programmable Attenuators, Signal Generators, and Switches on Display at IMS Booth #523
RF Attenuators

New Programmable Attenuators, Signal Generators, and Switches on Display at IMS Booth #523

Newburyport, MA – Vaunix Technology Corporation, a manufacturer of USB controlled and powered test equipment, will be debuting two new test application solutions at the 2016 International Microwave Symposium (IMS) in San Francisco, the LDA-203 and the LMS-802DX. The LDA-203 is a new digital attenuator with an operating frequency of 1 to 20 GHz. It features a 0 to 63 dB attenuation range and a...

Read More »
Programmable Attenuators cover frequencies up to 40 GHz.
RF Attenuators

Programmable Attenuators cover frequencies up to 40 GHz.

With attenuation range up to 60 dB and 0.03 dB minimum step size, Digitally Controlled Programmable Attenuators adjust amplitude of signal levels in RF, microwave, and millimeter-wave systems. Devices have integrated TTL driver logic control bit circuitry that ranges from 5–10 binary bits, depending on model. Enclosed in environmentally sealed metal packages with epoxy paint finish and either...

Read More »
Programmable, Digital Attenuator has 1-20 GHz operating range.
RF Attenuators

Programmable, Digital Attenuator has 1-20 GHz operating range.

Powered and controlled by connection to- PC or self-powered USB hub, LDA-203 has 1–20 GHz operating frequency, 0–63 dB attenuation range, and 0.5 dB step size resolution. Unit is also programmable for fixed attenuation or swept attenuation ramps directly from included graphical user interface (GUI) software. While programmable for ATE applications, attenuator can also be used in WiMAX,...

Read More »
RF Attenuators

Athermal AWG suit extreme temperature applications.

Based on optical packaging technology, Super Athermal AWGs can be used for such channel-dense DWDM applications- as 25 GHz DWDM as well as extreme-temperature (-40 to +85°C) operating environments for outside-plant deployments. Products can be made to support total of 20 pm or less wavelength drift, which is equivalent to 0.15 pm/°C shift.

Read More »

All Topics