New Electronic Components & Devices Products

W-LAN Receiver System utilizes PocketPC-® environment.

Yellowjacket(TM) 802.11a Wi-Fi Analysis Tool works with Compaq's iPAQ PocketPC for sweeping, analyzing, and optimizing 5 GHz Wireless Local Area Networks. Calibrated receiver measures all 12 OFDM network channels operating on IEEE 802.11a standard, allowing users to determine Access Point, Packet Error Rate, SSID and RSSI signal levels of all access points, and NIC Client cards on or off network.

USB Connectors require minimal space on PCBs.

Mini USB Series consists of Type A, B, and AB connectors that are shielded for EMI protection, polarized to prevent mis-mating, and rated for 5,000 mating cycles. They support data rates up to 480 Mbps and power requirements up to 500 mA. Product variations include board-mount receptacles and cable plugs, both of which meet USB 2.0 requirements. Connectors are suitable for handheld computers,...

Connector Adapter Kits bridge diffferent thread sizes.

TwistMateÃ-® Adapter Kits facilitate connection of different sized male and female NPT threads with TwistMate test connectors and plugs. Adapter kits bridge different sized internal and external threads in any size combination between 1/8-1 in. Kits also connect female-to-female and male-to-male. TwistMate connectors are offered with 1/8-3 in. male and female NPT threads and handle leak-free...

Cable Assemblies meet IEEE 802.11 standards.

MHF jumpers satisfy IEEE 802.11, Bluetooth(TM) and FCC Part 15 standards for wireless applications including WLAN, RF Test Points, and PDA devices. Jumpers use low profile connectors that occupy minimal board space while providing VSWR rating of 1.3 max. up to 6 GHz. TeflonÃ-® cables are used in RFW-10506-XX, MHF plug to MHF plug; RFW-10507-XX, MHF plug to pigtail; RFW-10508-XX, MHF plug to...

EMI Filters 101: Everything You Need To Know

In this eBook, we'll discuss everything you need to know about EMI filters, including their importance, regulatory requirements, and different types.

Fiber-Optic Converters isolate DeviceNet networks.

Modular, DIN-rail-mounted PSI-MOS-DNET system consists of fiber-optic converters that allow complete isolation of DeviceNet networks as well as full redundant operation of fiber communication lines and power supply. Immune to EMI, RFI, and transient surges, system allows use of base module for point-to-point configurations for line structures and extended bus drops. Offered with fiber-optic line...

Connector Card provides common computer interfaces to SBCs.

Built with CompactFlash socket, ZXE-ICB/104 includes Ethernet, CRT video, two USB, and 40- and 44-pin IDE connectors. Connection between SBC and Connector Card utilizes 0.1 in. headers. Standard components are soldered on, which allows device to withstand shock and vibration within rugged environments.

Connector provides high-amperage in compact footprint.

Han-Compact(TM) connector provides space-saving connection with hood and housing that accepts any single-space company Han-Modular(TM) power or signal inserts. Amperage connections of up to 60 A per contact can be made in smaller footprint than traditional circular connectors. Nickel-plated, die-cast zinc construction provides IP65 protection for applications such as rack-mounted power...

Flash Card Readers are USB 1.1 compliant.

USB 6-in-1 Card Reader, and USB Portable 6-in-1 Card Reader, with 4 slots each, are compatible with MultiMediaCard(TM), CompactFlash(TM), SmartMedia(TM), Secure Digital(TM), Memory Stick(TM), and MicroDrive(TM). Hideaway USB extension cable is included for easy access to desktop or notebook. Both readers allow drag-and-drop data transfer between memory cards. USB Secure Digital/MultiMediaCard...

Connector contains integrated electronics.

ID-Module contains integrated electronics including E2PROM with data storage capacity of 128 Bytes. Module provides non-volatile memory for decentralized storage of process parameters and coding of machine parts within industrial connector. Communication with ID-Module can be achieved with digital 24 V I/O unit using IÃ-²C-bus protocol. Module is operated and programmed via standard PLC.

Serial Boards feature multiports for PCI interface.

Multiport serial boards feature low profile Universal PCI interface, 64-byte FIFO driver, and ability to accept both 3.3 and 5 V server slots. CP-132U series has 2 RS-422/485 ports, CP-134U series has 4 RS-422/485 ports, CP-104UL series has 4 RS-232 ports, and CP-168U series has 8 RS-232 ports. Features include embedded 16 kV ESD surge protection, optional 2 kV optical isolation for RS-422/485,...

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.