RSEV Series EMC Filters come with touch-resistant terminal block.
RSEV Series EMC Filters are available with 250 Vac/Vdc voltage and 6, 10, 16, 20 and 30 A currents ratings. These filters are housed in 85 mm × 39 mm × 30 mm (L x W x H) package and feature an operating temperature range from -25 to +85°C. Units meet UL 1283, CSA C22.2 No.8 and EN 60939-3 standards and come with maximum earth leakage current of 1 mA at 250 Vac 60 Hz. RSEV Series filters are...
Read More »
EMC Filter for Single Phase Applications - Newly Introduced DC Approval
The very popular single-phase EMC filter portfolio of Schaffner is extended by additional highperformance versions of the filter family FN 2070. The internationally leading company in the field of electromagnetic compatibility introduces a new series of single-phase filters. The new high-performance filters are an extension to the standard variants of the FN 2070 series. They are designed to meet...
Read More »Richardson RFPD at APEC 2017
March 7, 2017 – Geneva, Ill.: Richardson RFPD, Inc. today announces its attendance and participation at the 2017 Applied Power Electronics Conference and Exposition (APEC). The Premier Event in Applied Power Electronics™, APEC focuses on the practical and applied aspects of the power electronics business, and it draws attendance from all facets of the industry, including manufacturers,...
Read More »
Genisco Resolves Fire Alarm Ground Faults with New EMI Filter
El Cajon, CA — Genisco Filter Corporation, the leader in the design and manufacture of EMI/RFI filters for power line, signal line, TEMPEST and custom applications, introduces the GF58270-21 fire alarm filter, the only filter on the market proven to resolve recurring false ground faults indicated during self-tests of digital fire alarm systems. “For fire alarm systems housed in a secure room,...
Read More »
Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components
A comprehensive exploration of a new wrought copper alloy wire used in powder metallurgical infiltration methods.
Read More »DC-DC Converters include companion EMI filters from 1-20 A.
Available in models ranging from 5–100 Watts, VHR Series powers non-flight-critical programs in military, avionics, and unmanned systems as well as manufacturing equipment and controls. Units offer wide input range for nominal 28 V input and average efficiency of 85%. Designed to operate at full-load over temperature range of -40 to +100°C, series features fixed frequency operation,...
Read More »Custom RF Filters enhance military/commercial system performance.
Custom quick-turn RF filters meet demands of military and commercial systems/sub-systems. Options include frequencies spanning HF to 20 GHz, 3 dB bandwidths from 0.1% to 28%, and up to 50 W power handling. Along with Bandpass, Lowpass, Highpass, and Bandstop (Notch) filter shapes, products are available in standard- Cavity, Lumped Element, and Distributed (Stripline or Microstrip) filter...
Read More »
DAS Absorber and Antenna Holder mitigate PIM.
To optimize installation, PIMinator® Distributed Antenna Systems are available with DASACHOLDER above-ceiling antenna holder. Plastic holder does not interfere with aesthetics of building and does not induce passive intermodulation. Attaching to plastic holder or surrounding structures, DASACABSORBER helps mitigate effects of PIM sources by absorbing reflections on cellular radio frequencies in...
Read More »AC and DC EMC/EMI Filters serve high-current applications.
Along with FN 331x series AC EMC/EMI filters on line side, FN 221x series DC filters help meet limits of EN 61000 and other EMC standards for PV installations in Europe and other regions. Both bus-bar filter series are available with ratings from 250–2,300 A, and FN 221x also helps increase solar panel service life, improve its reliability, and reduce potential interference radiations. Versions...
Read More »SCHURTER Showcases and Presents Its Extensive Range of Block and Line Filters Expertise at Motor and Drive Systems 2016
Santa Rosa, California- – Motor Drive Systems 2016 will be held January 21-22 in Jacksonville, Florida. This international, industry-leading conference is focused on the latest growth trends and technical advancements impacting motor and drive systems. Join Schurter's Chris Peters, Applications Engineering Manager on January 22nd at 11:25am for an up-to-date review on global EMC...
Read More »
Compact 10 A EMC Filter is suited for use with DC/DC converters.
Reducing emissions from high-frequency DC/DC converters, 50 x 15 x 10.8 mm PCB-mount iDQ48010A480V- accepts 0–75 Vdc, has max rated current of 10 A, and can operate at full current with natural convection over -40 to +85C range. On-board capacitance minimizes need for additional external components and provides differential mode filtering, and differential mode attenuation at 300 kHz is...
Read More »
Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »
