Vishay Intertechnology's High Voltage Thick Film Chip Resistors Combine High Power and Voltage Ratings with Stability of Less than 0.5%
Offers wide resistance range from 2 MΩ to 50 GΩ, tolerances down to ± 0.5 % and temperature coefficients of ± 100 ppm/°C. High power ratings up to 1.5 W and working voltages to 3000 V in five compact case sizes ranging from 1206 to 2512. Available with gold, palladium silver, platinum gold, platinum silver or platinum palladium gold terminations.
Read More »
Latest PSM Series Slide Potentiometers Come with Rated Life of 5000 Cycles
Offered in both surface-mount and through-hole mounted design with six resistance variants in the range of 500Ω to 50kΩ. Operated in -10°C to +70°C temperature range with a voltage rating of 100 VAC and linearity tolerance of more than 5%. Feature carbon resistive elements that provides a resistance tolerance within ±20%.
Read More »
TT Electronics Introduces GHVC Green High-Voltage Chip Resistors with Voltage Coefficient of -1.5 ppm/V
The GHVC Green High-Voltage Chip Resistors consist of E24 and E96 models with resistance values ranging from 25 kΩ to 100 MΩ. They are offered in standard EIA 1206, 2010, and 2512 chips with power ratings of 0.3W, 0.5W and 1.0W respectively. The resistors feature 1.2/50μs surge-voltage rating of 7kV and can be operated in -55°C to 125°C temperature range. Having a temperature coefficient...
Read More »
New Milwaukee GREM Resistors Come with EDG Technology
Vishay’s Milwaukee GREM Resistors are suitable for load banks, dynamic braking and motor control in low vibration industries and alternative energy applications. The units offer resistance ranging from 0.067 Ω to 24.273 Ω with a tolerance of ±10% and currents up to 18 A to 345 A. They can be operated in temperature up to +415 °C and feature temperature coefficients down to ±130 ppm/°C....
Read More »
Rack System Design & Buyer's Guide
There is plenty to consider before setting up or replacing storage rack systems in your warehouse. This whitepaper contains a guide and general checklist of the most important considerations.
Read More »
Latest LTO 150 Power Resistor is Designed for Direct Mounting on a Heatsink
Vishay’s LTO 150 Thick Film Power Resistor can be used as precharge or discharge resistor for inverters, converters and on-board chargers for EV, HEV and PHEV. The unit offers resistance values ranging from 0.03 Ω to 1.3 MΩ and a power dissipation of 150 W at a +45°C case temperature. The resistor is offered in clip-mount TO247 package, non-inductive design with a tolerance down to ±1%.
Read More »
Vishay Intertechnology Introduces a New Series of Direct Water-cooled Wirewound Resistors with Power Dissipation up to 9000 W and Minimal External Radiation
The newly released DCRF series of direct water-cooled wirewound resistors are capable of handling 10 times the power of naturally-cooled devices and two times the power of indirectly water-cooled devices. The resistors increase the reliability by limiting the surface temperature and a safe failure mode prevents leakage in an occurrence of a water-flow shutdown. The resistors provide inductance...
Read More »
TT Electronics's Latest Thick-Film Chip Resistors Feature High Surge Tolerance
Thick-Film CR and HR series Chip Resistors now include CR0603 and HR0603 resistors with resistance values ranging from 1R0 to 10M and 10M to 20G respectively. Units are designed for applications such as aerospace, military, communications, medical and industrial market segments. The resistors feature gold wire bond or solder terminations with a nickel barrier layer. CR0603 and HR0603 can be...
Read More »
Vishay's New Resistors are Suitable for Renewable Energy Power Systems
Vishay offers Grid (GRE1, GRE2, and GRE3 series), ribwound (RBEF / RBSF series) and neutral ground (NGR series) model resistors. Grid resistors offer a resistance ranging from 0.02 Ω to 240 Ω and inductance from 5 µH to 150 µH. RBEF/RBSF series resistors are suitable for pulsing applications and provide resistance from 0.010 Ω to 525 Ω. NGR series resistors are housed in IP23-rated...
Read More »
UBR Series Resistors Now Uses Glass-Sandwich FLEXITERM® Surface-Mount Technology
UBR Series Resistors are available with ±25, ±50, ±100, and ±250ppm/ºC temperature coefficient of resistance (TCR) values. Made from tantalum nitride (TaN) materials, units are suitable for optoelectronic transceiver modules, TOSA and ROSA, low-noise amplifiers and MMIC amplifiers. UBR Series Resistors are operated in -40°C to +125°C temperature range with resistance values of 25Ω, 50Ω,...
Read More »
Vishay Intertechnology to Exhibit Leading Vishay Electro-Films Products at OFC 2018
Highlights to Include Custom Submounts and Substrates, and Thin Film RF Capacitors and Spiral Inductors, Microwave Resistors, and Resistor Chips for Hybrid Assemblies MALVERN, Pa. - March 6, 2018 - Vishay Intertechnology, Inc. (NYSE: VSH) today announced that it will be showcasing its latest industry-leading Vishay Electro-Films (EFI) solutions at the 2018 Optical Fiber Communications Conference...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
