Future Electronics Presents Nebula IoT Development Board with Cloud Connectivity
The Nebula IoT Development Board comes with Cypress CYW4343W Wi-Fi (802.11 a/b/g/n) and Bluetooth 4.1 chipset radio. The unit is embedded with Arm® Cortex®-M4 STM32 MCU that features 32 bit RISC Core, 180 MHz frequency, 2MB Flash, up to 256 kB SRAM. The board provides cloud connectivity to Amazon Web Services, IBM Bluemix, Alibaba Cloud and Microsoft Azure. It’s hardware can be expanded...
Read More »
New MCC 118 Voltage Measurement DAQ HAT Board Offers Up to Single-Ended Analog Inputs
New MCC 118 Voltage Measurement DAQ HAT Board performs single point measurement or waveform measurements with sample rates up to 100 kS/s. It allows stacking of up to eight MCC HATs onto one Raspberry Pi and offers up to 64 channels of data with maximum throughput of 320 kS/s. The MCC DAQ HAT library C/C++® and Python™ commands enable user to develop applications on Linux.
Read More »
New Model 6001 QuartzXM System-on-Module Features Up to 18 GBytes of DDR4 SDRAM
Pentek’s Model 6001 QuartzXM™ System-on-Module creates a multichannel data conversion and processing solution on single chip with eight integrated RF-class A/D and D/A converters. The unit provides LVDS connections to Zynq UltraScale+ FPGA and GTY communications for gigabit serial communication. It accepts analog IF or RF inputs and delivers the inputs as differential pairs into the RF-signal...
Read More »
New MitySOM-A10S-DSC Processor Board Comes with Dual-Side Connectors
MitySOM-A10S-DSC Processor Board is designed for machine vision, test and measurement, embedded instrumentation, industrial automation and control applications. Unit comes with Intel®/Altera Arria® 10 SoC with dual core ARM and up to 480KLE FPGA fabric and two DDR4 RAM memory subsystems. Supporting OpenCL™ and high-level synthesis (HLS) tools, the processor accelerates design cycles.
Read More »
Cold Forming: A Cost Effective Alternative to Machining Small Parts
Cold forming offers tight tolerances, dimensional stability, and advanced surface finishes, while also saving you in raw material wastes costs.
Read More »
New HDClear 3-Mic Development Kit Features Programmable Dual-Core DSP
HDClear™ 3-Mic Development Kit enables developers to build Alexa-enabled devices such as smart speakers, wearable computing device, smart home devices and remote controls. Kit comes with improved voice algorithms such as echo cancellation, noise reduction, beamforming and far-field enhancement. Unit’s DSP features SPI, I2C, UART and SLIMbus application processor interfaces. HDClear™ kit...
Read More »
CMS Technology Expands its Marine Communications Product Suite with DE70322T AIS Class B Demonstrator
CMS Technology releases the DE70322T AIS Class B Demonstrator based on the CMX7032 marine AIS processor platform. The demonstrator also includes a reference design package consisting of schematics, Gerber files, BOM and source code. The device delivers a standalone, high-performance dual channel receiver/ single transmitter on 161.975 MHz and 162.025 MHz. The demonstrator allows manufacturers to...
Read More »
New VP869 6U VPX FPGA Board Comes with Two VITA 57 FMC+ Sites
VP869 6U VPX FPGA Board is embedded with two Xilinx® UltraScale+™ FPGAs and a Zynq® 7000 Series MPSoC. Unit is designed with over 72 high speed serial lanes routed to the backplane that delivers 594 Gbps data throughputs. The board features 24 bidirectional high speed serial lanes with up to 300 Gbps data bandwidth. Suitable for applications such as electronic warfare, radar/sonar processing...
Read More »
New Model 5950 Quartz RFSoC Board Supports DRFM and Radar Applications
Pentek’s Model 5950 Quartz RFSoC Board is integrated with eight RF-class A/D and D/A converters, quad ARM Cortex-A53 and dual ARM Cortex-R5 processors. Unit is embedded with 18 GBytes of DDR4 SDRAM, x8 PCIe Gen 3 link and 12 LVDS general purpose I/O interfaces. The board features an 8 lane, 28 Gb/sec optical interface that supports built-in 100 GigE interface and customer protocols. The Model...
Read More »
Arduino Introduces Connectivity Boards that Help in Streamlining IoT Development
Arduino’s new Connectivity Boards Include MKR WiFi 1010 and MKR NB 1500 models. MKR WiFi 1010 is embedded with ESP32-based module, programmable processors (based on ARM processor core and dual-core Espressif IC). Unit provides 2.4GHz WiFi and Bluetooth communications and is equipped with Microchip’s ECC508. MKR NB 1500 board supports transmission via AT&T, T-Mobile USA, Telstra and Verizon...
Read More »
Abaco's New VP430 Direct RF Processing Board Reduces the Slot Count by One Fourth
VP430 Direct RF Processing Board is designed for electronic warfare applications such as MIMO, beamforming, sensor processing and radar signal processing. The unit features FireFly™ 8-channel VITA 66.4 fiber optic interface for transfer of greater than 12 GBps with throughput of 6 GSPS per channel. Board comes with eight ADC (4GSPS) and eight DAC (6.4GSPS) synchronized channels and Xilinx®...
Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.
Read More »
