New Sealed Dust-proof Scan Head Features Fiber Adapter for Direct Connection
Pre-focus configuration with integrated z-axis enables scan head usage without an F-Theta objective. Delivers high imaging quality and high dynamic performance. Ideal for deflection of multi-KW single-mode fiber lasers.
Read More »
Pepperl+Fuchs Presents Its Latest RFID Read/Write Heads with Auto-Start Functionality
The RFID Read/Write Heads are designed to operate in HF range and provide a read/write range of up to 13 cm. The units feature a standard IP-link interface that provides connectivity to bus systems. They can connect up to eight IO-link devices and are offered in rugged housing for use in harsh industrial environments.
Read More »
Long-Range Read/Write Head offers adjustable output power.
Able to read as many as 200 tags, F192 outputs max power per FCC, 4 W EIRP, for reading over distances of >15 ft. Output power is adjustable down to 10 mW for short read ranges, and support for industrial M12 connection cables let operators run >3,200 ft back to main control system without any reader performance degradation. Operating up to 158°F ambient, UHF reader has completely...
Read More »Nutfield Leads the Way in Galvanometer Mirror Scanners Including Two and Three Axis Scan Heads
Hudson NH — Nutfield Technology has been designing and innovating galvanometer mirror scanners, scan heads and scan control software since 1997. Known for innovative design and manufacture, Nutfield recently expanded into a 20,000 square-foot facility. Their commitment to high quality, affordability and innovation make them an ideal partner, with four-week lead times, and outstanding technical...
Read More »
CMAA Crane Buyer's Guide
CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.
Read More »Nutfield Broadens its Range of Galvanometer Scan Heads Introduces D-20 XY Digital Scan Head
Hudson NH — Nutfield Technology, (www.nutfieldtech.com), one of the leading providers of galvanometer scanners has one of the broadest arrays of galvanometer scan heads. The D-20 XY galvanometer scan head is their latest product. A fully digital, encoder-based scan head, the D-20 is ideal for applications requiring the highest levels of accuracy as well as stability. Because the D-20 XY is a...
Read More »Scan Head offers long-term stability and low drift.
Suited for such large image field applications as 3D printing and laser cutting, intelliSCAN III 20 has 20 mm aperture, offers various options and digital-servo algorithms, and supports application- and customer-specific tunings. Electronics provide diagnostic and communication functionality, while dynAXIS 3 galvanometer scanners minimize long-term drift and temperature drift. System suits...
Read More »
Laser Marking Scan Head combines speed and positional stability.
Available with silicon mirrors forÂ- 3 laser wavelengths, basiCube 10 scan head achieves 800 cps and exhibits positional stability under load. Product is optimized for basic laser marking applications and features 10 mm aperture as well as laser marking-optimized tuning.
Read More »Galvanometer, Scan Head Maker Nutfield Technology to Attend Photonics West in February
Hudson NH Â- — Nutfield Technology, (www.nutfieldtech.com), one of the leading providers of mirror galvanometer and scan head and laser scanner technology, is slated to attend SPIE Photonics West trade show February 10th through the 12th at the Moscone Center in San Francisco. The three-day show, which boasts more than 20,000 attendees and two exhibition halls, will have 1,250...
Read More »Why the Need for 3-Axis Scan Heads Positioning Architecture Technology?
Hudson NH — Nutfield Technology (http://www.nutfieldtech.com) the leader in galvanometer laser scanner manufacturing notes that with the increasing proliferation of lasers, laser technology and new materials, there is an increased need for laser beam positioning options.Â- One of the more exiting positioning architecture technologies is the introduction of 3-axis scan heads. With a...
Read More »Laser Scan Head marks contoured surfaces.
Featuring 3-axis design, Contour Galvanometer Laser Scan Head engraves wood, plastics, and metal by vaporizing material underneath scanner. Unit is also suitable for engraving glass because laser causes microscopic cracks and lifts cracked material off surface. While 2-axis laser scan head operates in X/Y plane for use on flat, 2-dimensional surfaces, Contour moves in third axis, thereby allowing...
Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »
