New Fiber Cables from L-com are ideal for High Speed Data Center Applications
Includes OFNR or low-smoke zero-halogen (LSZH) jackets, connector pins or no pins, choice of OM3, OM4 and OM5 Multimode fiber, and fiber counts of 8, 12 and 24 channels. MPO to MPO cable assemblies for point-to-point connectivity comes with harnesses allowing users to convert from 8 fiber to 12 or 24 fiber trunks. MPO fan-out cables with an MPO connector on one end of the assembly and LC, SC or...
Read More »
L-com Introduces New OM5 Fiber Cable Assemblies with OFNR and LSZH Jacket Options
Eight standard off-the-shelf lengths are available for each cable family ranging from 1 meter to 25 meters. Available in SC to SC, SC to LC and LC to LC connector combinations. Supports short wavelength division multiplexing which reduces the parallel fiber count by at least a factor of four.
Read More »
NAI Presents Fiber Optic Cable Assemblies with Flame Retardant PVC Sheath
Available in 288F, 576F, 1,728F and 3,546F assemblies with fiber counts of 288, 576, 1,728 and 3,456 respectively. Fiber optic cables are pre-terminated at one end with LC or MPO connectors. Pliable single mode ribbon cable is OFNR Riser rated and meets high density space requirements.
Read More »
Beam Fiber Optic Cable Assemblies come in connector housing.
Beam Fiber Optic Cable Assemblies are suitable for tunnel boring, mining, oil and gas, power generation and transmission to outdoor broadcast and festival setup applications. Units feature high bandwidth which allows HD video signals to control boring machines. This IP68 rated product is operated in a temperature range of -40 °C to +85 °C and features optical interfaces.
Read More »
Site Amenities & Furnishings: Key Considerations When Sourcing A High-Volume Manufacturer
This white paper looks at the six key considerations when sourcing a high-volume manufacturer of site amenities and furnishings. Download now to find out more.
Read More »
Fiber-Optic Patch Cables meet ANSI/UL standard.
Fiber-Optic Patch Cables are available in 1 m, 2 m and customized lengths. Units offer strong optical and mechanical transmission properties and meet UL and IEC standards. Products are suitable for electrical or electronic applications and consist of cable and connector. Offering speed up to 10 Gbps, connectors are available in LC-Duplex, SC-Duplex, B-FOC (ST), SC-RJ, and FSMA variations.
Read More »High Quality Fiber Optic Cables, Made in the USA, Custom Lengths Available
Electro Standards Laboratories (ESL), Cranston, RI, offers all types of high quality, terminated Fiber Optic Cable Assemblies in any length.Â- Fiber Optic Cables offer near-unlimited bandwidth at high speeds over long distances and are totally immune to electrical interference. These cables are critical components in telecommunications, networking, broadcast communications, and...
Read More »
Northwire Expands HD Broadcast Offering with LEMO SMPTE Fibre Optic Assembly Certification
Benefit from end-to-end interconnectivity:Â- LEMO connectors, NWI cables, assemblies repair OSCEOLA, WI. – Northwire, Inc., (NWI), a leading custom cable and assembly manufacturer and subsidiary of The LEMO Group, announced it is officially certified by LEMO to build and repair SMPTE hybrid fibre optic cable assemblies. With more than 30 years as the leader in high...
Read More »
USB 3.0 Cable Assemblies feature right angle design.
Capable of 4.8 Gbps, Right-Angle USB 3.0 Cable Assemblies are specifically designed for high-speed data applications in tight spaces. Cables also support high-resolution cameras used in USB3 Vision applications.Â- Available in 6 stock lengths with up or down exits and Type A, B, and Micro-B configurations, products feature molded connectors with 30 µin. gold-plated contacts and are...
Read More »
Pre-Terminated Network Cables offer color-coding options.
Offered in both fiber and copper with standard or short body cassette design, RapidNet Category 6A and Category 6 Unshielded Cables are available with colored jacks for color-coding applications. Choice ofÂ- port colors helps define network features such as routes, services, hierarchies, or security levels. Both RapidNet 6A UTP and shielded 6A F/UTP solutions are designed to minimize...
Read More »Test Reference Cables support network verification.
Available in singlemode and multimode versions, HLC® SCRATCHGUARD® Test Reference Cables feature hardened lens contact technology. Laser process produces tempered mating surface that extends life span of assembly. Shipped with optical performance data, interferometric data, and Fiberchek inspection data, cables are suited for fiber optic performance testing, manufacturing lines, fiber...
Read More »
ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services
J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!
Read More »
