
New 600W LED Driver from Delta Electronics Meets IEC 61000-4-2 and IEC 61000-4-5
Can withstand 10kV common and differential mode surge immunity. Comes in 36V (LNE-36V600WBGA) and 48V (LNE-48V600WBGA) output voltages. Operating temperature ranging from -40°C to +70°C with convection cooling.
Read More »
TVS Diode Array protects equipment from ESD.
Fitting into 0201-size footprint, SP1026 Series 15 pF Bidirectional Discrete TVD Diode Array protects sensitive electronic equipment from damage due to electrostatic discharges. Zener diodes fabricated using proprietary silicon avalanche technology protect each I/O pin. Diodes can safely absorb repetitive ESD strikes at -
Read More »
Surge Suppressor Kit supports explosion proof applications.
Available for use with field-installed instruments enclosed in BH and SB housings, Surge Suppressor Kit is approved for Explosion Proof applications in US/Canada and Australia/New Zealand. Surge suppressor exceeds Severity Level 4 of IEC 61000-4-4, providing 3 kA (8/20 -µsec) of surge protection, stopping failures due to lightning, spikes, and overvoltage surges while minimizing other electrical...
Read More »
Surge Protection Devices keep equipment operating safely.
Offered in NEMA 1/2/3/3R/3X/4/4X enclosures, Surgency™ protects equipment in commercial, industrial, and residential applications by capturing surges before they cause damage. Products offer up to 7 modes of protection for absorbing surges- and redirecting them to ground. Along with 200 kA Short Circuit Current Rating (SCCR), features include surge current protection up to 100 kA as well as...
Read More »
Glass vs. Plastic: Benefits of Using Glass Components in Biotechnology, Medical Device, Point-of-Care & Pharmaceutical Industries
This white paper from Accu-Glass outlines the various properties that make glass such an attractive option for a diverse range of medical-related applications.
Read More »
Low-Profile 400 W TVS Diodes protect sensitive electronics.
Available in SMT SOD-123FL package, SMF4L Series protects portable devices/hard drives, notebooks, VCC busses, POS terminals, SSDs, power supplies, and monitors from voltage transients induced by lightning and other transient voltage events. Flat lead, plastic package occupies- 3.10 x 2.00 mm footprint- and has- 0.98 mm profile. Along with- 400 W @ 10/1000 -µsec peak pulse power dissipation...
Read More »Circuit Protection Devices address computing application demands.
With respective capacitance of 0.6 pF and 1.0 pF, GBLC03CIDNHP TVS array and- SRV25-4LC port protection array- shield networking, mobile, and other computing applications from destructive effects of electrical transients. Rated at 500 W for 8/20 -µsec waveshape, GBLC03CIDNHP- protects- 1 power or I/O port.- Offering 400 W peak pulse power per line (8/20 -µsec typ), SRV25-4LC combines- 8...
Read More »TVS Diode Arrays prevent equipment damage due to lightning, ESD.
Integrating low-capacitance steering diodes with- TVS diode, 3.3 V SP4042 Series- provides sensitive electronic equipment with 2 channels of protection against damage due to lightning-induced surge events and ESD. This TVS diode array safely absorbs up to 120 A per IEC61000-4-5 (tP= 2/10 -µsec) without performance degradation and- -
Read More »AEC-Q101 Qualified TVS Diode increases protection not footprint.
Offering 5,000 W (10/1,000 -µsec) or 2,200 W (load dump) peak pulse power dissipation rating in- P600 package, SLD Series protects automotive electronics – ECU, TCU, BCM, sensor, and entertainment systems- – from voltage transients induced by load dump and other transient voltage events. Uni- and bi-directional polarity devices, supporting junction temperature- up to 175-
Read More »TVS Components offer high voltage spike circuit protection.
Supplied in molded DFN-2-KW surface mount package, 33 V Model SM10KW33A and 36 V Model SM10KW36A provide 8,500 W of peak pulse power dissipation for 10/1000 -µs waveform. Model SM10KW33A has minimum breakdown voltage of 36.8 V and max clamping voltage of 56.6 V at 150.0 A, while Model SM10KW36A features minimum breakdown voltage of 40.0 V and max clamping voltage of 60.7 V at 140.0 A. Operating...
Read More »
RJ45 4-Pair Surge Protector meets/exceeds CAT6 standards.
With solid state technology lending to 2–5 nsec response time, SurgeGate™ CAT6 RJ45 4-Pair protector meets/exceeds CAT6 standards for signal integrity (attenuation, return loss, and crosstalk) and provides protection for technologies using 10 G Base-T Ethernet connections. Wall mounted device measures 9 x 4.5 x 2 in. and houses 1–6 surge protector modules, while 1U 19 in. rackmount housing...
Read More »
TPA Motion Introduces Industry's First Compact Robotic Positioner for Medical Devices
TPA Motion's microplate handling robots are designed specifically for medical instruments and lab automation devices. Check out the video to learn more.
Read More »