Miscellaneous Lines

Communication Systems & Equipment

North American Stamping Group Installs COE Coil Processing Line in Mexico

Sterling Heights, Mich., July 22, 2016 - COE Press Equipment announced that it has recently installed a new press feeding line at North American Stamping Group's (NASG) Queretaro, Mexico facility, which produces stamped parts and welded assemblies for the automotive and other industries. This system joins over 10 other COE lines already installed at various NASG location. The 72-in. line can...

Read More »
Electrical Equipment & Systems

COE Press Equipment Ships Coil Feeding Line to Alliance Laundry Systems

Sterling Heights, Mich., July 5, 2016 - COE Press Equipment announced that it has supplied and installed a coil processing line to Alliance Laundry Systems (Ripon, WI), a global leader in commercial laundry equipment and solutions. The line, which is now in operation, consists of a servo feed, dual threading table, power straightener and coil reel with full line automation controls. The 42-in....

Read More »

COE Press Equipment Ships Two Feed Lines to Takata
Communication Systems & Equipment

COE Press Equipment Ships Two Feed Lines to Takata

Sterling Heights, Mich. – COE Press Equipment announced that it has recently shipped two press feeding lines to Takata, a supplier of air bags, seatbelts and other automotive components, to the company’s San Antonio stamping plant. Each of the lines is comprised of an 18-in. ServoMaster™ 3 Series roll feed; a style 350, 18-in. power straightener; a COE 24-in., 15,000-lb. capacity coil...

Read More »
Electronic Components & Devices

COE Press Equipment Supplying Nine Coil Feeding Lines to Goodman Manufacturing

Sterling Heights, Mich. – COE Press Equipment announced that it is supplying nine new coil processing lines to Goodman Manufacturing, a provider of air conditioning and heating equipment. Seven of the lines are comprised of COE standard motorized uncoilers, feeds, and pull-through straighteners in widths of 30-in., 48-in. or 60-in. The other two lines consist of Goodman-specific features and...

Read More »
Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components
Sponsored

Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components

For the past 60 years, the use of copper infiltration on ferrous metals in powder metallurgy has been a popular method for manufacturing high performance components. Recently, a new twist on an old idea has been developed in the form of a new wrought copper alloy wire. With excellent infiltration response as well as the ability to improve numerous physical and mechanical properties of ferrous materials, this new technology presents many advantages for PM processing and production. In this comprehensive white paper, you will explore all you need to know about this material, including an in-depth look at its chemical and physical properties. Using automotive components as examples, the white paper examines the benefits of this new form of copper infiltration compared to more traditional infiltration methods. Download now, and discover if this new technology is the solution for your high performance component application.

Read More »
Electronic Components & Devices

COE to Demonstrate Cut-to-Length Calculator: Determines Cost Savings by Blanking In-House

Sterling Heights, Mich. — In booth S4734, COE Press Equipment will calculate savings -- based upon ton-usage and toll rate -- that can be achieved by blanking in-house with a Value-Added Series" COE Cut-to-Length (CTL) line. In-house CTL lines provide flexibility to run blanks in the sizes needed as needed, reducing inventory, scrap and overall processing costs while improving quality....

Read More »
Coil Unwinder/Straightener/Feeder handles high-strength materials.
Communication Systems & Equipment

Coil Unwinder/Straightener/Feeder handles high-strength materials.

SpaceMaster Series 4 combines unwinding, straightening, and feeding of coil stock into one piece of equipment that occupies 22 ft of floor space. While Feeder-Straightener features servo-actuated pilot release of upper straightener rolls, systems also feature tension-maintaining powered pull-off rolls. Products handle materials – CRS, HRS, AHSS, stainless, and aluminum – from .020–.40-in....

Read More »

Lear to Install Four COE Coil Processing Lines in Mexico
Construction Equipment and Supplies

Lear to Install Four COE Coil Processing Lines in Mexico

Sterling Heights, Mich. – COE Press Equipment announced that it has received orders for four new coil processing lines from Lear Mexican Seating Corp for installation at the company’s Saltillo, MX location. All of the coil processing systems will feed new AIDA presses being installed at the facility. Two of the lines are designed to process coil stock up to 24 in. wide in thicknesses from...

Read More »
Communication Systems & Equipment

COE Press to Supply Coil Feeding Line to Superior Roll Forming

Sterling Height, Mich. – COE Press Equipment announced that it has recently received its first coil feeding line order from Superior Roll Forming (Valley City, OH), a provider of roll formed and welded assemblies primarily serving the automotive industry. The line consists of a servo feed, threading table, power straightener, and coil reel. The 18-in. line can process coil from 0.030 to 0.250...

Read More »
Electronic Components & Devices

North American Stamping Group Installs COE Coil Processing Line

Sterling Heights, Mich. – COE Press Equipment announced that it has recently installed a new press feeding line at North American Stamping Group (NASG)'s Portland, Tenn. facility, which produces stamped parts and welded assemblies for the automotive and other industries. This system joins 10 other COE lines already installed at various NASG locations. The 72-in. line can process coil from...

Read More »

COE Ships Progressive Press Feed Line to Hudson Industries
Communication Systems & Equipment

COE Ships Progressive Press Feed Line to Hudson Industries

Sterling Heights, Mich. – COE Press Equipment announced that it has shipped a new coil feeding line to Hudson Industries (Hudson, IN), a manufacturer of metal stampings for the automotive industry. Commissioned to feed a new Eagle 400T progressive die press, the new coil handling and feeding line has a maximum coil width capacity of 36”, coil weight capability up to 30,000#, and can process...

Read More »

All Topics