Voltage Dividers

Voltage Dividers

Thick Film Chip Resistor Dividers save space and simplify designs.

OfferingÂ- various termination styles and materials, CDMV series conserves space, simplifies designs, and promotes design flexibility in high-voltage industrial and alternative energy equipment. Devices offer working voltages up to 1.4 kV and provide single-component replacement for multiple discrete resistors in voltage division applications. As 2 resistors...

Read More »
Resistor Divider Network comes in surface mount 1206 format.
Voltage Dividers

Resistor Divider Network comes in surface mount 1206 format.

Compatible with high-speed assembly equipment, Vishay Dale Electro-Films HVRD features absolute tolerance to 1%, ratio tolerance to 0.1%, absolute TCR as low as ±50 ppm/°C, and TCR tracking of ±10 ppm/°C. Thin film resistor divider network, with maximum operating voltage of 120 V, is suitable for voltage division in power converters, battery management circuitry,...

Read More »
Voltage Dividers

Maxwell Technologies Launches Line of High-Voltage Capacitors and Capacitive Voltage Dividers for Arctic Climates

New Electric Utility Grid Products Operate Normally at Temperatures Down to -60 Degrees C ROSSENS, Switzerland - Maxwell Technologies, Inc. (Nasdaq: MXWL), a leading producer of energy storage and power delivery products, announced today that its Swiss subsidiary has introduced a line of high-voltage capacitors and capacitive voltage dividers (CVD) that operate normally at temperatures down to...

Read More »
Voltage Dividers

Capacitors and Voltage Dividers suit medium voltage uses.

Featuring molded resin construction, CONDIS® Series utilizes CDAS technology, which is based on capacitor windings made of metalized polypropylene dielectric and impregnation with gas, eliminating potential for oil leakage. Devices operate from 10-52 kV with capacitance range of 2-500 nF and ±5% tolerance. Typical applications include partial discharge measurement, energy management,...

Read More »
Switchable Voltage Divider features 8 resistors.
Voltage Dividers

Switchable Voltage Divider features 8 resistors.

Model 1134 Switchable Voltage Divider has 8 resistors that can be individually switched on or off, allowing multiple switches to be flipped and corresponding resistors to be paralleled. It also provides interface to non-Phidgets variable resistance sensors. With current consumption up to 30 mA and supply voltage of 3.0-5.25 Vdc, unit offers switchable resistance up to 1 million W and variable...

Read More »
Voltage Divider features resistance range of 10 W to 200 kW.
Voltage Dividers

Voltage Divider features resistance range of 10 W to 200 kW.

Suiting spaced-constrained applications, DIV23 Series voltage divider in SOT23 package measures 0.1125 x 0.051 in. with board-mounted profile of 0.0305 in. It incorporates self-passivating TaNFilm® on silicon technology which does not dissolve when exposed to moisture and voltage. Operating in temperatures from -55 to +125°C, unit has rated operating voltage of 100 V and element power...

Read More »
Voltage Divider Resistors offer TCR tracking to 0.1 ppm/°C.
Voltage Dividers

Voltage Divider Resistors offer TCR tracking to 0.1 ppm/°C.

With resistance range from 100 W to 20 kW, Models 300144Z and 300145Z combine low typical TCR of ±0.2 ppm/°C from -55 to +125°C, tolerance matching to ±0.005%, and load-life stability ratio of ±0.005% at +70°C for 2,000 hours at rated power. Z-Foil resistors provide almost instantaneous thermal stabilization time of less than 1 sec. Power rating is 0.2 W at...

Read More »
Voltage Dividers

SMT Flip Chip Voltage Divider delivers precision operation.

Built with non-inductive, non-capacitive design, VFCD1505 offers 25 kV ESD protection and absolute TCR of ±0.05 ppm/°C from 0 to +60°C (±0.2 ppm/°C from -55 to +125°C). It provides tight tolerance matching down to ±0.005% and TCR tracking of 0.1 ppm/°C between 2 resistors simultaneously etched on one piece of foil on common substrate. Featuring...

Read More »
Voltage Divider features ESD rating above 25,000 V.
Voltage Dividers

Voltage Divider features ESD rating above 25,000 V.

Measuring 4.06 x 2.69 mm with height profile of 1.60 mm, DSMZ Z-Foil surface-mount voltage divider provides matched pair of Bulk Metal® Z-Foil resistors in single, surface-mount package. It features TCR of ±0.05 ppm/°C from 0-60°C and ±0.2 ppm/°C from -55 to +125°C, PCR tracking of 5 ppm at rated power, tolerance match of ±0.01%, and load life...

Read More »
Voltage Dividers come in 1206 package.
Voltage Dividers

Voltage Dividers come in 1206 package.

Compatible with automatic placement equipment, PFC Divider Series is available with TaNFilm® Tantalum Nitride technology or Tantalum Ultride(TM) technology. TaNFilm unit has power rating of 250 mW and provides resistance range of 10 W to 150 kW, while Tantalum Ultride unit features power rating of 50 mW and resistance from 1-50 KW. Both include wrap-around terminations with non-leaching...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics