VCXO Oscillator offers selectable outputs.
Surface-mount Model VPLB54TED allows engineer to specify 2 or 3 frequency options at design stage in 120-200 MHz range. User then utilizes input logic pin to select one of 2 or 3 pre-set frequencies. Unit meets SONET Phase Jitter requirements, offers stabilities as tight as Ã-
Read More »
Clock Oscillators feature package height of 1.40 mm.
Series 91SMOL low profile, 5 x 7 mm, surface-mount oscillators come in 5.0 and 3.3 V versions. They feature standard always-on operation and are supplied with tristate or enable/disable functions implemented. Frequency range extends from 1-125 MHz for 3.3 V versions and from 1-133 MHz for 5 V types. Units are sealed in ceramic, seam-welded package with gold plated terminals. Operating temperature...
Read More »
Powerline Filter provides protection from 100-300 A.
FL Series EMI filter provides protection from conducted electronic noise in 3-phase applications. Suited for inverter, variable speed motor drive, RF generator, and uninterruptible power supply requirements, product incorporates integral coil design with characteristics that make it suitable for use in existing products as well as in new designs.
Read More »
Splitter/Combiner Module suits RF test applications.
Model SMP6905 incorporates six 2-way 0Ã-
Read More »
Metal Stamping for Construction Tool Applications
Metal stamping is a highly versatile manufacturing technique, capable of producing quality components at tight tolerances.
Read More »
Corrosion-Resistant Plug suits mobile electrical accessories.
Weather-resistant, 12 V plug incorporates interconnecting design that provides locking, moisture-proof connection. Proprietary design, optimized for metal connection points, offers user-replaceable 10 A fuse, 15 A rating, and internal strain-relief and cord seal. Plastic parts are made from glass-filled nylon, while metal, current-carrying parts are nickel-plated copper alloy. Product is suitable...
Read More »
Terminator and Cable System is suited for U320 SCSI systems.
LVD Terminator and Internal Cable System matches impedances of bus to help insure that bus terminates in stable environment. Terminator supports LVD SCSI drivers. Active chips on terminator pcb detect type of SCSI drivers present on bus via voltage on DIFFENS SCSI control line. Circuitry includes 2.7-5.25 V operation, differential failsafe bias, built-in SPI-3 Mode ChangeFilter/Delay, and tightly...
Read More »
PCI A/D Board streams at 14-bit resolution.
Model PCI-417N samples 32 analog input channels in parallel at rates to 80 KHz per channel. Product includes 32-bit wide, on-board, DMA PCI bus master and non-stop streaming design. Additional offerings include local A/D FIFO memory up to 256K samples, WindowsÃ-® C++ DLL software, and LabVIEWÃ-® VI's plus ActiveX/OCXÃ-® controls. Full scale input voltage ranges of Ã-
Read More »
SMT Power Inductors have low profile and small footprint.
Series RL-7200 inductors measure 1 mm high and have footprint of 7.4 x 7.3 mm. Covering inductance value range from 1-560 Ã-µH, units employ shielded design that eliminates EMI. Manufactured using fully automated production process, product operating temperature range is -40 to +85 Ã-
Read More »
PCI Bus Serial I/O Adapter offers 16 serial ports.
COMM+16.PCI provides 16 RS-232 ports, allowing connection to data acquisition/control devices. Designed using XR16C850 UART, product supports PC data rates and offers top speed of 460.8 Kbps. Board provides 128-byte FIFO and Universal Bus that allows compatibility with 3.3 V computers as well as 5 V systems. Connection to board is made through two 68-pin connectors. Two single fan-out cables...
Read More »
Pin and Sleeve Devices are IEC 309-1 and 309-2 compliant.
North American IP67 Watertight devices are offered in ratings from 20-100 A. International-rated devices come in IP44 Splashproof version rated for 16, 32, and 63 A and IP67 Watertight version rated for 125 A. Liquid-tight adapter complete with screws and gasket, provides protection from water and moisture, making them suitable for data centers and other critical applications. ValoxÃ-® 357...
Read More »
Precision Machining Solutions with Over 25 Years of Experience
Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.
Read More »
