New Electronic Components & Devices Products

Backplane Connector suits high-speed systems.

Series Tempus(TM)-HS 4000 features 0.5 mm plated through-hole, resulting in less capacitance, delivering less than 5% crosstalk above 5 Gbyte/s and differential insertion loss under 1 dB at 5 Gbyte/s. The 2 mm connector is drop-in replacement for FCI's HS4000 products. Short signal tuning forks reduce electrical length of overall mating interface. Connector is capable of 10 Gbyte/s signals in...

Analog-to-Digital Converter operates at 125 MSPS.

Model ADS5500 14-bit converter features 70 dB SNR and 85 dB SFDR at 100 MHz input frequency. Low power dissipation of 750 mW reduces power supply requirements and need for thermal management. When combined with Model GC5016 digital up/down converter, unit allows oversampling and undersampling of input IF signal. Device comes in 64-TQFP PowerPad(TM) package and is suited for wireless...

Dry-Film Capacitors are rated from 100 to 105-

Dry metallized-film capacitors can be used with all HID ballasts for metal halide, high-pressure sodium, mercury vapor, and low-pressure sodium lamps utilizing capacitors rated 400 V or less. Features include compact size, thermoplastic construction, no exposed live parts, and UL/CSA approval.

Media Converter offers Ethernet switching technology.

Model 302MC provides one RJ-45 Auto-sensing 10/100BaseTX port and one 100BaseFX port, allowing connection of 10/100BaseT Ethernet devices to fiber cabling infrastructure. Converter auto-negotiates speed and flow control capabilities of TX copper port connection, and configures itself automatically. It supports up to 4,000 MAC addresses, has full IEEE 802.3 compliance, and withstands extreme...

Metal Stamping for Construction Tool Applications

Metal stamping is a highly versatile manufacturing technique, capable of producing quality components at tight tolerances.

Receptacles are offered in right angle PCB mount.

Attached to brass housings that provide watertight seal, 3-, 4-, and 6-pin M8 picofast receptacles and mating cordsets are suited for power and signal transfers. Male and female PCB receptacles are available; former mates with threaded and snap-lock picofast cordsets, while latter works with picofast threaded cordsets. All versions provide protection that meets IEC IP 67. Voltage and current...

Quick Connection Device connects 2 distinct air/fluid lines.

With panel-mount design, ABS Twin Tube(TM) is manufactured with injection-molded ABS and offers chemical-resistance and dimensional stability. Operating pressure ranges from vacuum to 120 psi per line. No orientation is required for proper connection and unit features free rotation of coupling body and insert. Thumb latch provides for one-handed disconnection of two lines, while audible click...

Phono Preamplifier operates from batteries or power mains.

Model 4041 is a rack-mount version of Model 404A Stereo RIAA Phono Preamp for both moving magnet and moving coil pickup cartridges. It is powered from furnished dc wall supply or internal rechargeable batteries, and has internal shielding to minimize pickup of unwanted interference.

LED Bulbs offer alternative to incandescent bulbs.

LED Festoon Bulbs are housed in lens that uses sun's UV rays to produce glow, even when lamps are not powered up. Lambertian lighting pattern provides even distribution of light. With lamps lasting up to 100,000 hours, bulbs can replace incandescent bulbs in indoor and outdoor applications. Requiring 2.5 W of energy and operating within 90-250 V range, bulbs feature flame retardant materials,...

Chip Resistors offer values down to 0.001 ohm.

With physical dimensions from 0.250 x 0.126 x 0.035 in. to 0.250 x 0.125 x 0.35 in., ULX-2512 series ultra-low ohm chip resistors are available in values from 0.001-0.1 ohm. They are offered in 4-terminal Kelvin configuration, single side or wraparound, with platinum/silver, solder coated platinum/silver, or gold contacts. Tolerances available include: 5% (0.001-0.005 ohm); 5% and 2% (0.005-0.010...

Coupling has non-spill valve design.

Equipped with non-spill shut-off valves, NS6 Series Non-Spill Coupling is made from glass-filled polypropylene with 316 stainless steel springs and EPDM or optional FKM o-ring seals. Olefinic overmolding provides grip for users and is also used for color-coding. Series incorporates thumb latch for secure, single-handed operation. Connection withstands operating pressures from vacuum to 120 psig...

The Carbontec System: A Smarter Way to Heat Your Buildings

Carbontec's paper-thin radiant heating systems reduce energy consumption costs by warming the building surfaces instead of controlling air temperature. Check out our video to learn more.