New Electronic Components & Devices Products

Fixed-Gain Amplifier suits video signal processing.

Packaged in SOT23-6 and SO-8, OPA693 ultra-wideband, fixed-gain video buffer amplifier utilizes output stage architecture and operates from one 5-12 V power supply. Using +5 V supply, it delivers 2 Vpp output swing with 90+ mA drive current and 400 MHz bandwidth at +2 gain. Internal resistor network provides fixed gain of +2 video buffer or Ã-

Insert extends range of Han-® connectors.

Model K 8/0 insert makes Heavy Duty HanÃ-® Connectors suitable for medium power applications in power and transportation equipment. Insert has 8 contacts rated at 80 A, with an additional contact to connect protective earth (PE). Termination method is axial screw contact. Insert mounts in standard size 24B hoods and housings with protection degrees up to IP 68. It can also be housed in closed...

Switch Cabinet Connector facilitates wiring.

Han-SnapÃ-® is designed for wiring of multiple closed electrical equipment cabinets. Hinged, rail fixing, connector-mounting element facilitates use of standard connector inserts inside electrical control enclosure. Connector inserts are locked into carrier element without use of tools.

Integrated Circuit accesses 2 serial or parallel ports.

Model FT2232C dual-port USB-to-serial/parallel I/O IC is based on USB UART/FIFO FT232BM (USB-serial) and FT245BM (USB-parallel). Each of the dual ports configure independently in several different modes. Full modem hardware and software handshaking is offered in serial mode, with Automatic Transmit Enable control for RS485 applications. FTDI protocol allows galvanically isolated designs to...

Key Considerations When Choosing a Power Cord

This white paper provides an overview of key considerations when choosing a power cord.

Angled D-Sub Pressfit Connectors have modular design.

Pressfit versions with lead-free surface are intended for applications where automated SMT assembly is not possible, subsequent placement of connector is required, or connectors are pre-mounted in housing and board is pressed in. Insertion forces are absorbed by form-fitting contacts in insulating body made of high-temperature resistant thermoplastics, and bolt anchoring ensures stability. They...

Decade Voltage Dividers offer voltage ratings of 1,200 V.

Compact Series 1776-C67 and 1776-C68 are for 3Ã-½-, 4Ã-½-, and 5Ã-½-digit handheld and benchtop multimeters, power-quality meters, and other devices where precision voltage is required. Featuring TetrinoxÃ-® Film System, dividers offer load life stability of 2,000 hr at full rated voltage at 85Ã-

Finger-Proof Connectors provide user safety.

PowerpoleÃ-® 15/45 Connectors prevent finger access when unmated and energized. Flat-wiping contact system reduces contact resistance at high current, while wiping action cleans contact surface during connection/disconnection. Molded dovetails secure connectors into keyed assemblies, preventing misconnection. With interchangeable genderless design, connectors are rated 15, 30 and 45 A for 600...

Work Surfaces provide vibration isolation.

Tabletops, benchtops, platforms, and breadboards with MaxxAlign(TM) design feature mounting holes tapped at Ã-½ in. intervals in rows 1 in. apart, with Ã-¼-20 or M6 threads. Breadboards and BenchMates are portable units. Compact personal workstations, suited for small labs and other tight spaces, accommodate loads to 440 lb. Midrange models provide spacious work surfaces and control loads...

Oscilloscope Terminals provide analog signal processing.

Models KL3361 and KL3362 process 16 mv and 10 V analog signals, respectively, and can replace separate analog cards and associated wiring harnesses. Analog input values are processed over 1 of 13 fieldbus networks including Ethernet, Profibus, and DeviceNet. Bus Terminals locally convert analog signal to digital signal at speeds configurable down to 10 Ã-µs. They store data in local 32 Kbyte...

Engineer's Design Kit has 50+ types of panel-mount LEDs.

Kit includes 3-5 mm LED models, which are all fully assembled indicators ranging in hole sizes from 0.187-0.312 in. Ready for drop-in fit, LEDs come with mounting hardware and insulated leads for circuitry layouts. Operation range of 2-28 V combined with plug and play functionality enables engineers to test various LEDs in prototype or pre-production unit to discover how they would function. LEDs...

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.