New Electronic Components & Devices Products

Position Transducer comes in foot- and flange-mount models.

Heavy-duty, geared potentiometer provides dancer roll position feedback signals. Able to handle up to 80 lb of radial load, stainless steel input shaft is supported by double-sealed and prelubricated ball bearings. Unit does not contain internal stops and is mounted in steel box with screw-on cover. Rated for 1 W, it provides better than 1% linearity with infinite resolution and offers over 700...

Digital To Analog Converters guarantee 16-bit monotonicity.

Dual Model LTC2602 and quad Model LTC2604 are available in 12, 14, and 16-bit versions, each with monotonic performance over temperature with DNL of Ã-

Digital Power Controller speeds product development.

Power, control, and data interfaces of MultiDriver(TM) Board provide integrated system for digital controller development. Switching power stage accepts 12-48V supplies and provides 6 A half-bridge or 3 A full-bridge output current. FlexController(TM) SOC allows verification of control algorithms through PC with FTview(TM) software. Data communication is through FlexBus(TM) isolated multi-drop...

SOIC Adapters upgrade older relays.

Offered with 8 leads, SOIC Adapters are .062 in. thick FR-4 with 1 oz of copper traces on both sides. They are available on .300 in. DIP centers and can be mounted on PCBs with hole diameter of .028 in. Pins are 360 Ã-½ hard brass alloy, and pin plating is 5.08 Ã-µm minimum tin/lead 93/7 over 2.54 Ã-µm minimum nickel. Adapters provide upgrade from older Aromat HB2E relays to...

Air Amplifiers and How They Work

Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.

Inclined Agitator eliminates dead spots.

Inclined Agitator helps evenly cook high-viscous products and ground meats, eliminating dead spot often found in center of kettle. Slow blender speeds can be used to accommodate gentle products while still mixing thoroughly. Heavy-duty drive can be designed for 2,000,000 cps, and 4 in. flush-bottom ball valve allows for discharge of most products.

Analog Input Card offers 30 MS/s sampling rate.

High-speed, Model PCI-1714 streams continuous data from analog samples to host memory. Simultaneous sampling is provided on all 4 input channels through dedicated A/D converters. Trigger modes include software triggering, internal and external pacer triggering, post trigger acquisition, delay trigger acquisition, and pre-trigger acquisition. Card includes software for auto calibration, so no...

Data Acquisition Module suits industrial applications.

PCM-ADIO single board, PC/104 data acquisition module combines 32-channel, 16-bit A/D converter; 4-channel, 12-bit D/A converter; 16 lines of digital I/O; and event trigger control. Onboard microprocessor controls input and configurations, conversion rates, FIFO depth, output ranges, calibration, and digital I/O settings without use of jumpers or potentiometers. Automatic conversion rate is...

Toroid Inductors provide noise suppression.

Series 2300 features iron powder core that helps eliminate undesirable conductive emissions, making units suited for high-current applications. Measuring 1.28 x 0.65 in., inductors have 0.5 in. lead length tinned to within 1/16 in. of body. They offer inductance range of 10-1,000 Ã-µH; self-shielding, low core loss; and operating temperature range of -55 to +105Ã-

D-Sub Connectors are suited for use in field installations.

Offered in EMI/RFI-shielded housings, solder- and crimp-free SUBCON D-Sub connectors are available in high-density 37- and 15-position versions. Cabling is connected to screw-clamp terminal blocks, and terminations are made using screwdriver. Integral strain relief ensures reliable connection to the terminals. Connectors feature option of one or 2 cable entries, and male and female versions are...

Copper Connector suits high-speed switching applications.

Copper microGiGaCN(TM) Connector includes vertical board-mount I/O socket. Optimized for differential signal transmission of 3.125 Gbps and above over standard FR-4 material, FCN-260D socket is available in 4x and 12x versions with latches for InfiniBand applications. Supporting pcb thicknesses from 0.062-0.110 in., socket has 0.75 mm signal-to-ground contact pitch, 1.5 mm signal-to-signal...

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.