Arcos Bridge and Rail Plasma System reduces overall cost of operation.
Featuring Hypertherm Plasma and IHT Automation OxyFuel torch, Arcos Bridge and Rail Plasma System with Hypertherm XPR300 can cut any metal from gauge material up to 2 in. of mild steel and 6 in. stainless whereas with IHT Automation OxyFuel torch can cut up to 8 in. of mild steel. Designed with automatic homing, breakaway design, centering mount, system’s OxyFuel torch automates cutting...
Read More »
Doosan's DMP 500/2SP offers dual-spindle vertical machining.
Equipped with two spindles and two automatic-tool-change (ATC) systems, the DMP 500/2SP is capable of machining two parts simultaneously to reduce workload and setup time. Unit includes a W-axis adjustment of 20mm on right spindles to account for variability in fixture heights. Designed to produce high volume parts, product comes with standard12,000 RPM direct drive spindles with 87 lb ft of...
Read More »
Doosan's DMP 500/2SP offers dual-spindle vertical machining.
Equipped with two spindles and two automatic-tool-change (ATC) systems, the DMP 500/2SP is capable of machining two parts simultaneously to reduce workload and setup time. Unit includes a W-axis adjustment of 20mm on right spindles to account for variability in fixture heights. Designed to produce high volume parts, product comes with standard12,000 RPM direct drive spindles with 87 lb ft of...
Read More »
BLM Group USA to Feature New Tube Fabricating Solutions at FABTECH 2017
Novi, MI - BLM GROUP USA, (www.blmgroup.com), a global leader in the manufacture of tube processing solutions will display its wide range of equipment at FABTECH 2017 in booth #B11010 at McCormick Place in Chicago. The company will feature its new LT8.10 fiber laser tube cutting system, along with its series of highly efficient and productive tube bending machines: SMART, ELECT 102 and E-TURN 52...
Read More »
Top Metal Stamping Trends of 2020
This white paper provides an in-depth look into metal stamping trends.
Read More »
BLM Group USA to Feature New Tube Fabricating Solutions at FABTECH 2017
Novi, MI - BLM GROUP USA, (www.blmgroup.com), a global leader in the manufacture of tube processing solutions will display its wide range of equipment at FABTECH 2017 in booth #B11010 at McCormick Place in Chicago. The company will feature its new LT8.10 fiber laser tube cutting system, along with its series of highly efficient and productive tube bending machines: SMART, ELECT 102 and E-TURN 52...
Read More »
OEM Positioning and Heading Boards support fast RTK initialization times.
Operated in single-frequency or full performance multi-frequency, multi-GNSS, Atlas-capable mode, Vector Eclipse H328 OEM Positioning and Heading Boards support fast RTK initialization times over long distances. Housed in 60 mm x 100 mm module with 24- and 16-pin headers, units offer fast accuracy heading of more than 0.17° at 0.5 m antenna separation. Designed with Serial, USB, CAN, Ethernet,...
Read More »
OEM Positioning and Heading Boards support fast RTK initialization times.
Operated in single-frequency or full performance multi-frequency, multi-GNSS, Atlas-capable mode, Vector Eclipse H328 OEM Positioning and Heading Boards support fast RTK initialization times over long distances. Housed in 60 mm x 100 mm module with 24- and 16-pin headers, units offer fast accuracy heading of more than 0.17° at 0.5 m antenna separation. Designed with Serial, USB, CAN, Ethernet,...
Read More »
FATHOM Revealed at RAPID as Early Adopter of Newest 3D Printing System by Stratasys
Stratasys Introduces Automated FDM-Based 3D Build System Being Used at FATHOM's Advanced Manufacturing Facility in Oakland, CA Oakland, California - May 9, 2017 - FATHOM, an advanced manufacturer with an expertise in 3D printing, is leveraging the Continuous Build 3D Demonstrator to push the limits of additive manufacturing. Many customers have adopted 3D printing as a means of production beyond...
Read More »
FATHOM Revealed at RAPID as Early Adopter of Newest 3D Printing System by Stratasys
Stratasys Introduces Automated FDM-Based 3D Build System Being Used at FATHOM's Advanced Manufacturing Facility in Oakland, CA Oakland, California - May 9, 2017 - FATHOM, an advanced manufacturer with an expertise in 3D printing, is leveraging the Continuous Build 3D Demonstrator to push the limits of additive manufacturing. Many customers have adopted 3D printing as a means of production beyond...
Read More »
GF Machining Solutions to Unveil Several New Machines at Open House
LINCOLNSHIRE, IL., April 25, 2017 – GF Machining Solutions will introduce seven brand new machines – two of which will be the heavy-duty AgieCharmilles CUT P 350/550/850 wire EDMs and the highly precise Mikron MILL P 900 vertical mill – at its upcoming Solutions Days event. Taking place June 6 – 7 at the Company’s U.S. Headquarters in Lincolnshire, Illinois, the event will also showcase...
Read More »
How SpinSelect Can Save You Time and Money
Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.
Read More »
