Custom Manufacturing Services

Abaco Systems Recognized by Mentor Graphics for Innovative Design
Research, Design and Development Services

Abaco Systems Recognized by Mentor Graphics for Innovative Design

• Honors ability to design leading-edge solutions • Illustrates Abaco commitment to innovation, minimal cycle time HUNTSVILLE, Ala.- – Abaco Systems today announced that it was chosen by Mentor Graphics as the winner of Best Overall Design" in Mentor's 26th annual PCB Technology Leadership Awards. The award acknowledges engineers and designers who use innovative methods and design...

Read More »
Assembly Services create custom cable and wire harnesses.
Assembly Services

Assembly Services create custom cable and wire harnesses.

Cable- and Wire Harness Assembly Services include component selection and sourcing, documentation review and development, prototyping, and custom inventory management. Featuring broad range of automated wire processing equipment, firm can work with wire from 30 AWG to 500 KC mil, virtually any connector type, and provide fully automated point-to-point testing. Products range from hookup wire...

Read More »
Rubber

Jefferson Rubber Achieves WRAS Material Approval for Butyl Rubber

Worcester, MA - Jefferson Rubber Works Inc., a custom manufacturer of rubber molded products,- has recently received material approval from the Water Regulations Authority Scheme (WRAS).  The approved rubber material is suitable for contact with wholesome water for domestic purposes having met the requirements of BS6920-1:2000 and/or 2014 'Suitability of non-metallic products for use in...

Read More »
Stampings and Washers are designed for medical applications.
Washers

Stampings and Washers are designed for medical applications.

Made-to-order stampings and washers are available in 2,000+ material options, including medical standard stainless steel and- titanium. Non-metallic materials, such as ABS, PTFE, and PDVF, are also available. Over 30,000 non-standard flat washer and spacer sizes are available. In addition to medical beds, carts, and wheelchairs, applications include IV delivery components, therapy equipment,...

Read More »
Presses

R & M Manufacturing Adds AMADA EMK 3012 CNC Turret Punch with Tapping Capability

Buffalo, Minnesota – R M Manufacturing, a US Company, announces that it added a new Amada EMK 3612 M2 CNC Turret punch to its fabrication department. According to Jeff Nelson, Operation Manager, the EMK-M2 includes four tapping heads and the ability to process 60" wide x 120" long sheets. R&M purchased the turret with the tapping option in response to customer requests to eliminate secondary...

Read More »
Laser Texturing Machine occupies 48.4 x 87.8 in. footprint.
Cutting Services

Laser Texturing Machine occupies 48.4 x 87.8 in. footprint.

Employing fully digitized texturing process, 3-axis LASER P 400 and 5-axis LASER P 400U- are automation ready and can texture, mark, engrave, and add functional texture to parts, molds, and dies. Dual laser head, which includes fiber nanosecond and femtosecond pulsed lasers, allows surface texturing and engraving with one setup. While LASER P 400 accommodates workpieces up to 23.6 x 15.7 x...

Read More »
Additive Manufacturing

3D Systems to Demonstrate Full Range of Advanced Manufacturing Solutions at Pacific Design & Manufacturing 2016

Showcasing comprehensive portfolio of 3D printing materials, on-demand parts services and healthcare solutions Expert additive manufacturing facilities certified for healthcare, automotive and aerospace applications ROCK HILL, S.C. - 3D Systems (NYSE:DDD) announced today that it will bring its full range of advanced manufacturing and healthcare solutions to Pacific Design Manufacturing 2016,...

Read More »
Air Plasma Systems support automated and mechanized cutting.
Cutting Services

Air Plasma Systems support automated and mechanized cutting.

With cutting and piercing capacities from -¼–5/8 in., Models A40, A60, A80, and A120 provide 80% duty cycle at respective rated outputs of 40, 60, 80, and 120 A. Systems feature CNC interface connection that offers Start/Stop, Ok to Move, and divided arc voltage signals. For location flexibility, A-Series systems can use 208–230 V or 460 V single-phase power, as well as 3-phase power....

Read More »
Matrox Unveils World's First Single-Slot Graphics Card to Drive Nine 1920x1080 Displays for 3x3 Video Walls
Assembly Services

Matrox Unveils World's First Single-Slot Graphics Card to Drive Nine 1920x1080 Displays for 3x3 Video Walls

Matrox Unveils World's First Single-Slot Graphics Card to Drive Nine 1920x1080 Displays for 3x3 Video Walls Matrox C900 provides a stretched desktop across nine outputs making it ideal for digital signage, presentation and control room applications MONTREAL — Matrox® Graphics Inc. today announced Matrox C900, the world's first single-slot, nine-output graphics card that supports nine...

Read More »
Abrisa Technologies Machines Ultra-Thin Glass
Glass

Abrisa Technologies Machines Ultra-Thin Glass

Abrisa Technologies carries a diverse inventory of thin and ultra-thin glass which can be CNC machined, fabricated, screen printed, strengthened and thin film coated. Glass stocked ranges in thicknesses from 1.1mm down to 0.1mm. Thinner substrates with a thickness as low as 0.05mm are available for specialized application-specific requirements. -  Our precision CNC cutting equipment in addition...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics