New Mechanical Components and Assemblies Products

Push-To-Exit Plates offer English and Spanish messages.

Model SD-7202GC-PE consists of single-gang, stainless-steel plate with 2 in., square, green, illuminated pushbutton. Additional offerings include NO/NC contacts rated 10 A @ 125-250 Vac, 5 color-coded wires with spade lugs, and replacement bulb and resistor. Model SD-7103GC-PE combines slimline, stainless steel plate with 1 x 11/16 in., green, illuminated pushbutton. Each model offers 2...

Worm-Drive Clamps reduce friction with smooth band.

TORROÃ-® hose clamps eliminate sharp edges and welds and are available with built-in spring, which improves clamping force and destruction torque while compensating for compression set. Band widths include 9 mm in aluminum-zinc and 12 mm in stainless steel. Aluminum-zinc offers corrosion resistance and withstands exposure to salt spray for 144 hours without red rust. Combination head screw...

Aluminum Cylinders have strength of steel.

Hydraulic, aluminum cylinders include single-acting RAC Series, double-acting RAR Series, RACL Series single-acting lock-nut, and RACH Series single-acting hollow plunger. Constructed from 7075T-6 aluminum Alloy with Hard Kote treatment, products incorporate composite bearings on all moving surfaces, removable hardened saddles, and steel base plates. They provide lifting capacities from 20-150...

Linear Slides and Positioning Stages have center hole.

SMI products incorporate center hole on ball slides with travel of 1 in. or greater. Mounting with center hole eliminates bow on slide and strengthens mounting security. Interchangeable products are made of aluminum carriage and base with black anodized finish. Units provide straight line accuracy of 0.0001 in./in. of travel for cross rollers and 0.0005in./in. of travel for ball slides....

Bearing Solutions For Your Robotics and Automation Applications

This ebook provides an in-depth overview into bearing solutions for your robotics and automation applications.

Steel Indexing Plungers suit surface mount applications.

Available in lock-out and non lock-out types, plungers provide hardened and ground steel pins with zinc plated steel mounting plate. Products offer non-removable, matte black, glass-filled, reinforced nylon plastic knob. Lock-out type is used in applications where plunger pin is required to stay in retracted position for predetermined amount of time; lock-out position is achieved by retracting...

Bulk Containers feature modular design.

BOXXÃ-® industrial bulk conainers are made of impact-resistant HDPE plastic and can be stacked up to 10 high, full-load. Solid and vented sides can be mixed and matched based on need of application. Removable sides allow easy loading and unloading. Containers can be completely knocked down and provide haul back ratio of 3.5:1.

Flexible Sleeves provide protection from radiated heat.

ClevaflexÃ-® Sewn Sleeves, made from woven fiberglass laminated to aluminum foil, provide protection of components from heat sources up to 1000Ã-

Miniature Bellows Coupling offers clamping hubs.

Flexible Series MK2 torsionally rigid drive component is backlash and maintenance free, and balanced for high speed. Coupling mounts with 2 clamping screws, and incorporates stainless steel bellow that compensates for axial, lateral, and angular shaft misalignments simultaneously. It is available for torque range from 4-88.5 lb-in.

Retainer extends bearing life.

QuickSilver(TM) composite metal-polymer retainer combines anti-bacterial, lubricant-retaining properties of porous silver coating with strength of polymer. It improves bearing's operational life in applications that require maintenance-free operation and where bearings are only marginally lubricated, such as medical and dental uses or applications requiring autoclaving and/or operation at...

Prelubricated Bearings handle oscillating movements.

Series DS(TM) bearings eliminate fretting corrosion damage to shafts under low-amplitude oscillating movements. Bearings feature rigid steel backing to which is bonded porous bronze sinter layer, impregnated with filled acetal polymer bearing lining. Bearings withstand max static specific load of 16,000 psi. Max recommended sliding speed is 5 fps dry, 8 fps greased, and 33 fps with marginal...

Triad's Next-Gen Power Supplies Offer Increased Reliability and Reduced Noise Performance

Triad Magnetics, an established leader in power supply design and manufacturing, is proud to announce their next generation WAU AC and WDU DC Series of power supplies. These linear wall plug-ins offer minimum noise performance without sacrificing reliability or life. See our video to learn more.