Mechanical Components and Assemblies

Stainless Steel Clamp adjusts over wide range.

Stainless Steel Clamp adjusts over wide range.

Clamp provides large diametrical adjustment range, similar to worm gear clamps, but has higher strength of T-bolt clamp. This allows one product to be used in several different applications. It can be fastened using simple torque wrench. Clamp comes standard with 3/4 in. wide band and is available in both tempered and annealed stainless steel.

Read More »
Flange Gaskets seal under low pressures.

Flange Gaskets seal under low pressures.

TriGuard(TM) gaskets provide positive sealing in fluid piping on fragile flanges or flanges with irregularities, where bolt torque and gasket compression stress must be limited. Expanded PTFE material combines sealing characteristics of elastomers with temperature and chemical resistance of PTFE. Gas-tight sealing can be achieved at 250 psi. They are available in 1/2 to 28 in. ANSI ring and full...

Read More »
Linear-Rail Bellows are thermally sealed.

Linear-Rail Bellows are thermally sealed.

Thermally Sealed Linear Rail Bellows offer liquid and dust proof materials and profiled PVC stiffeners in every fold. They install with snap on fit and Velcro fasteners. Thermally Sealed & Stitched Bellows offer seamless design for both liquid and particle protection. PVC frame is permanently attached into each fold. Stitched Style Bellow comes in round and rectangular form. Armadillo Bellows are...

Read More »
Miniature Ball Screw includes spring-preloaded double nut.

Miniature Ball Screw includes spring-preloaded double nut.

Series 1510 compensates for torque variations due to inaccuracies in ground thread. Diameters range from 3 to 16 mm with pitch down to 0.5 mm. Standard nut body is cylindrical with attaching thread. Applications include semiconductor production machines, inspection equipment, microscope stages, and miniature robotics. Series 1530 offers rolled thread for less demanding positioning applications....

Read More »
Test Assemblies range from DC to 65 GHz.

Test Assemblies range from DC to 65 GHz.

PHASEFLEXÂ-® Assemblies are crush-, torque-, kink-, and fluid-resistant. They are also dust- and dirt-proof with ergonomic/ruggedized boot strain reliefs. Standard connectors include SMA, TNC/PTNC, Type N/Precision N, 7 mm, 7-16, 3.5 mm, 2.92 mm (K style), 2.4 mm, 1.85 mm (V style). Assemblies are suitable for production testing, antenna range testing, thermal vacuum chambers, and remote...

Read More »
Cover Assembly eliminates leaks in pump controllers.

Cover Assembly eliminates leaks in pump controllers.

Cover Assembly consists of integral control lever, actuating spring, and elastomer face seal. Its design materials handle effects of dampening fluid under pressure and withstand varying humidity and temperature changes. Assembly mounts face seal down to pressure control pilot valve with electrical connections made through round opening in cover wall. Assembly is suitable for use in off-highway...

Read More »
Channel Framing spans bar joists.

Channel Framing spans bar joists.

ERISTRUT half slot channel (12 gage 1 5/8 or 13/16 in.) comes in 6 ft 8 in. precut lengths with green powder coat, pre-galvanized, and yellow dichromate finishes. ERISTRUT channel framing is available in every strut style with finishes that include those listed above as well as hot dip galvanized, stainless steel, aluminum, and plain. CADDY(R) prefabricated strut/beam clamp model numbers 200RS...

Read More »
Pulsation Dampener eliminates metal fasteners.

Pulsation Dampener eliminates metal fasteners.

Revolution Pulsation Dampener has housings that are threaded and screwed together, eliminating metal fasteners, which are subject to damaging effects of corrosive environments. It is available in PVC construction, with PVC bladder for total compatibility with many corrosive chemicals such as sodium hypochlorite.

Read More »
Container exceeds distribution container specifications.

Container exceeds distribution container specifications.

FlapNest(TM) 2115 Series attached-lid container offers 5-to-1 nesting ratio. Its features include: all-plastic hinges; security features suitable for securing with strapping, tie wraps, and snap-in clips; and leak-resistant lid. Deeper contoured handle allows greater access when nested. FlapNest 2115 is available in heights of 9 and 12 in. with optional features such as solid and open bottoms.

Read More »
Industrial Shock Absorber is 1.22 in. in length.

Industrial Shock Absorber is 1.22 in. in length.

MC 9 miniature series can be mounted in confined spaces. It features internal accumulator, stainless steel piston rod, integral mechanical stop, and fully threaded metric outer tube. Two weight ranges are available for handling multiple load conditions. Applications include small slides, packaging equipment, small robotics, instrumentation, and high speed automation.

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics