New Fluid & Gas Flow Equipment Products

Linear Stages utilize ceramic servo motors.

Available in wide range of sizes with slides ranging from 50-150 mm wide, FB Series Stages are based on crossed roller bearings and are provided with non-contact linear encoder. Position resolution ranges from 1 Ã-µm to 10 nm. Stages are compatible to single- or multi-axis configurations with XY or XYZ mounting options. Vacuum rated and non-magnetic versions are available.

Piezo Stage suits nanometrology and nanofabrication.

Offering travel ranges to 800 Ã-µm/10,000 Ã-µrad, 6-axis Model P-587.6CD provides 6Ã-

Filter Housing can open in 4 directions.

Available in carbon steel and Type 316 SS, FLOWLINE(TM) Filter Housing features cover that can be field-oriented to open and close in any of 4 different directions, eliminating problem of nearby obstructions. Should piping system layout change, cover opening orientation can be adapted to new layout. Offered in sizes to fit all standard length 01 and double length 02 filter bags, housing provides...

Adapter converts flushometers to electronic operation.

SMOOTH(TM) (Side-Mount-Operator-Over-The-Handle) retrofit product converts manual flushometers to water-conserving, sensor-based operation. Installed without turning off water, product offers out-of-the-box functionality and works for left or right handle installation on exposed manual water closet and urinal flushometers. SMOOTH Model EBV-200-A uses adaptive sensing technology to flush...

Metal Stamping for Construction Tool Applications

Metal stamping is a highly versatile manufacturing technique, capable of producing quality components at tight tolerances.

Check Valves target dual-fuel turbine installations.

Fabricated in 316 SS, CB Series Valves add protection in any system where back flow or pressure might cause damage. They include floating ball with micro-finished surface, TeflonÃ-® coated ball cage, and seats fabricated from materials that provide soft sealing surface for bubble-tight shut off and compatibility with fuel oils and amines. Valves come in 3/8, Ã-½, and Ã-¾ in. sizes,...

Tubing Sets ensure leak-free connections.

Pre-assembled Omnifit tubing sets include permanently attached, color-coded Omni-Lok(TM) fitting system on one or both ends to provide finger-tight seal that is suited for use in solenoid valve ports and other shallow PTFE ports. Made with PTFE tubing in 1/16 and 1/8 in. OD sizes, products feature flangeless fitting system which consists of robust, glass-filled polypropylene Omni-Lok fitting nut...

Push-On Terminals suit high-vibration applications.

UL listed and CSA certified 3M disconnect terminals are attached to their mating part by tongue of female part slipping over male tab, and are used where protection is required against short circuits. Fully insulated nylon push-on connectors are insulated from barrel to receptacle tab, and are available in 22-10 Ga. Providing positive wire insertion, products feature elimination of strand...

Fluoroplastic Paratubing provides chemical resistance.

Offered in sizes as small as .031 in. ID x .030 wall up to 3 in. OD, Fluoroplastic Tubing comes in Texflour(TM) FEP and PFA, and consists of 2-4 tubes longitudinally thermally welded, creating one conduit consisting of multiple individual tubes. Materials offer non-stick surface, are chemically inert and non-leaching. Paratubing offers ability to run several fluid lines as one entity and then...

Interconnect Arrays provide up to 500 I/Os.

Featuring choice of solder-crimps on tails, SEARAY(TM) SEAM/SEAF Series high density interconnects offer traditional tin-lead alloy or RoHS compliant tin-only and provide solid grid of contacts on .050 in. pitch. Products are available with stack heights of 7, 8.5, and 10 mm, and array sizes of 8 or 10 rows by 20, 30, 40, or 50 pins per row. Connectors' performance at -3 dB insertion loss is 4...

Type 1 Abrasive Wheels for Parts Rework, Tool and Mold Repair

A full line of cotton reinforced T1 abrasive wheels that can last up to three times longer than unitized wheels, depending upon the application, is available from Rex-Cut Products, Inc. of Fall River, Massachusetts. Rex-CutÃ-® Type 1 Abrasive Wheels are constructed from layers of cotton fiber which are impregnated with aluminum oxide or silicon carbide abrasives and then pressed and bonded...

TPA Motion Introduces New Curved Linear Rail Guides: the CR40 Series

For the ultimate in precision open and closed loop guided motion systems, TPA Motion is the leader in curved rail, liner guides. We specialize in engineering excellence, with products that exhibit an elevated level of precision, delivering robust performance, even under the most challenging conditions. See our video to learn more.