New Fluid & Gas Flow Equipment Products

Water-Saving Faucet offers temperature control option.

Available in battery-powered or hardwired models, OptimaÃ-® Lino(TM) faucet offers double IR sensor-based operation and uses microprocessor-based logic. Models with Integral Spout Temperature Mixer include lever that lets users adjust water temperature. Also available, i.q.-cliq(TM) button on spout of select models is used to access user-directed modes such as temporary off and continuous...

Pneumatic Valves target PET stretch-blow molding industry.

SELECT 4400 series provide pre-blow air pressure, controlled flow of pre-blow air, select capability between low-pressure pre-blow air, and high-pressure final-blow air. Featuring maximum operating pressure of 600 psig, valves are available for common functions such as 3/2 normally closed (Primary valves), Pressure Selectors, 2/2 normally closed, and 2/2 normally open. Units are available in port...

Valve minimizes dangers of air hose failure.

HOSE-FUZE(TM) senses high flow in line that occurs when hose or tubing suddenly fails and automatically reduces flow to minimize hose whip. Unit is available in port sizes from Ã-¼-1 in. with either NPT or BSP threads. Maximum operating pressure is 260 psig and temperature range is -4 to 275Ã-

Filters, Regulators, Lubricators feature modular design.

Designed to meet or exceed ISO standards, MD4(TM) Series FRL's feature modular clamps with integral mounting brackets. Units have tamper-resistant, removable knobs for sight-feed lubricators and removable regulator adjustment key. General-purpose plastic bowl with metal shatterguard offers coalescing and adsorbing filter options. Cap color options besides standard gold include red, blue, yellow,...

EMI Filters 101: Everything You Need To Know

In this eBook, we'll discuss everything you need to know about EMI filters, including their importance, regulatory requirements, and different types.

Iowa Company Turns to Ammonia to Solve the Hydrogen Storage Problem

ALGONA, Iowa, Sept. 19 /-- Hydrogen Engine Center, Inc. ( HEC ) (BULLETIN BOARD: HYEG) announced today that HEC and Sawtelle & Rosprim, Inc. ( Sawtelle ) will work together to design and build the world's first Ammonia Fueled Irrigation Pump System for the purpose of meeting California's new emissions requirements scheduled to go into effect in 2010. Plans include integrating HEC's...

Waterjet Intensifier Pump has simplified pump check tube.

Model iP6050 comes with Jet Edge intensifier pump check tube, which promotes service life and facilitates maintenance. Tube features low- and high-pressure poppets that open and close, allowing low-pressure water to flow into high-pressure cylinder and ultra-high pressure water to leave high-pressure cylinder. Low-pressure poppet assembly can be secured by single hollow screw and does not require...

Digital Valve Positioner uses Foundation Fieldbus technology.

Compatible with any HARTÃ-® or Foundation Fieldbus distributed control system, LogixÃ-® 3400IQ controls position of single- and double-acting valve actuators with linear or rotary mountings. It features FISCO-compliant user interface board, potentiometer, piezoelectric technology, and host interoperability. Commissioning, calibration, tuning, and setup is accomplished in 2 min from local...

Sanitary Sewer Pipe handles municipal waste.

Made from 100% virgin high density polyethylene (HDPE), SaniTiteÃ-® resists abrasion and corrosion resistance from acidic and alkaline soils and chemicals found in industrial waste and municipal sewer. Bell-and-spigot joint coupling system, which exceeds minimum requirement of ASTM D3212, provides continuous watertight performances, preventing water infiltration and sewer exfiltration....

Metal Pump stands up to harsh operating conditions.

Designed to withstand harsh environments, Ã-½ in. Pro-Flo X(TM) Original(TM) Series metal pump (PX1) comes with aluminum Pro-Flo X(TM) air distribution system (ADS) using Efficiency Management System (EMS). Optimization is achieved through integrated control dial that lets user select desired efficiency point and flow rate to best suit application at hand. Product is available with aluminum...

Announcing Lee's Expanded Spare Parts Line

Lee Industries, Inc. is proud to announce that it has expanded its line of spare parts to better serve its customers. The expanded lines include new scrapers for both Hamilton and Lee agitators, while still offering the existing full line of parts for Lee and Groen equipment. The newly offered Hamilton scraper blades include both Nylon and Peek materials. The Peek material is an excellent choice...

Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard

Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.