Fasteners & Hardware

Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage

Fixturing and Material Handling Technologies to be the Focus at WESTEC 2015

Jul 10, 2015

Fixtureworks® (Fraser, MI), a leading supplier of fixturing accessories, machine tool elements and material handling components, will bring a broad spectrum of its products to booth no. 808 at WESTEC 2015, which takes place in Los Angeles, September 15-17, 2015. The products displayed will highlight the wide variety of fixturing, clamping and material handling components that allow... Read More

Construction Equipment and Supplies, Fasteners & Hardware, Services

EVS Metal Awarded Contract for New NY Bridge Project

Jul 09, 2015

RIVERDALE, NJ — EVS Metal, Inc, a leader in full-service sheet metal fabrication, machining and integration, is pleased to announce it has been awarded a manufacturing contract for the New NY Bridge project.  This multi-billion dollar design-build contract for the New York State Thruway Authority being designed and built by Tappan Zee Constructors, LLC consists of two separate 3.1 mile long... Read More

Fasteners & Hardware, Machinery & Machining Tools

Indexable Boring Tool permits small-hole rough boring.

Jul 07, 2015

With boring range of 16–21 mm diameter, MW Boring Tool is suited for semi-finish boring operations of workpieces with die cast holes. Product is built with 20 mm diameter straight shank and performs best when paired with milling chuck at fixed bore depths up to 4 x D. Spiral groove carved into body facilitates clean chip removal with help of coolant holes near end of groove.... Read More

Fasteners & Hardware

Universal Tailgate Lock installs in minutes.

Jul 06, 2015

Designed to fit all truck platforms, GateDefender™ PL9900 is made similar to padlock that fits around tailgate hinge and locks tailgate to truck. Once locked into place, tailgate can open and close but cannot be removed without included key. GateDefender also includes adapter ring to accommodate smaller trucks. Read More

Fasteners & Hardware

Single-Hole Strap supports parallel runs of multiple cables.

Jul 01, 2015

Allowing multiple runs of cable to be strapped parallel to each other using one fastener, Mighty-Hold® Duplex Universal Steel One Hole Strap ensures contractors always have proper strap for application at hand. Spring-loaded finger enables zinc-plated, steel strap to securely fasten range of AC/MC/MCIA cables. Supporting two runs of AC/MC/FMC, cULus-Listed product accommodates 14/2 to... Read More

Fasteners & Hardware, Mechanical Components and Assemblies

Carbon-Graphite Piston Rings seal high-pressure gases.

Jul 01, 2015

Carbon-graphite piston rings, used in conjunction with carbon-graphite guide rings or carrier rings that hold piston centered on cylinder bore, are self-lubricating and seal high-pressure gas in applications requiring compressed gases that do not contain oil or grease. Guide rings can be either solid rings or segmented rings with butt joints. At least two rings with off-set segment joints are... Read More

Fasteners & Hardware

Alliance Rubber's Oversized Band Product Now Available at Tractor Supply Company

Jul 01, 2015

Supersize Bands will be sold on shelves at the rural retail store operator for a trial period HOT SPRINGS, Ark. — Blue Supersize Bands are now available in limited quantities at most Tractor Supply Company locations. The bands will be in stores for the next six months. Sales results from the trial period will help determine if the bands are added to the permanent product list. "We believe these... Read More

Fasteners & Hardware, Safety & Security Equipment

Key Control Innovations from Morse Watchmans Advance Security Levels and Risk Mitigation

Jun 23, 2015

IFSEC Exhibit Highlights Industry Leading Product Portfolio London, England  - Morse Watchmans’ market-leading portfolio of key control and management solutions, featured this week at IFSEC at their booth (E1800), is helping organizations of every type improve operational security by providing innovative technology for comprehensive safeguarding and management of keys. With experience as a... Read More

Fasteners & Hardware

Patented PEM® R'ANGLE® Fasteners for Thin Metal Assemblies and Printed Circuit Boards Create Strong Right-Angle Attachment Points and Application Benefits

Jun 19, 2015

Create Strong Right-Angle Attachment Points and Application Benefits Patented PEM® R'ANGLE® fasteners for thin metal assemblies and printed circuit boards create strong right-angle attachment points to enable tighter design control, reduced hardware counts, and associated production economies.  This family of fasteners consists of self-clinching types for permanent installation into... Read More

Controls & Controllers, Fasteners & Hardware, Materials & Material Processing, Mechanical Components and Assemblies, Mechanical Power Transmission, Mounting & Attaching Products, Services

MISUMI Extends Same Day Ship Time to 6PM EST

Jun 19, 2015

Free Same Day Shipping Upgrade for in-stock components if ordered online by 6:00 p.m. EST. Orders placed with a Customer Service representative are available for Same Day Shipping when placed by 5:00pm EST. MISUMI USA, Inc., a subsidiary of MISUMI Corporation, part of MISUMI Group, Inc. (Tokyo: 9962), has announced its improved same day shipping service for all in-stock product lines. Effective... Read More

Fasteners & Hardware

Phillips Flat Head Screws attach plywood to light-gauge steel.

Jun 17, 2015

Available in 3 sizes, all of which feature #2 Phillips flat head, Plylite® Miracle Fasteners™ feature unique point design that enables plywood to be attached to 25–20 gauge steel studs. There are no threads immediately behind point, preventing ride-up as plywood is attached. As fastener is driven, shank slides through plywood and metal stud until upper threads engage in stud. Coated in... Read More

Fasteners & Hardware

Pin Clamps feature integrated pneumatic cylinder.

Jun 16, 2015

Weighing 3.4 lb, PCZ Pin Clamps provide positive part location and clamping, up to 6 mm part thickness. Gapless dual fingers clamp on both sides of hole or part, unlike single hook designs. Locating pins are available in bullet nose or low profile styles, with diameters from 8.00–16.00 mm. With retract option, low profile pin disappears into unit, below backup, for easy part release. Clamps are... Read More

Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage

Small Screw Questions for Automatic Feeding and Driving by Design Tool, Inc.

Jun 16, 2015

1. How do you define "small" screws? For screw feeding systems, I would define "small" screws as screw sizes smaller than #4 for American National Standard or ANSI screws.  For metric screws, sizes smaller than 3mm would also be considered "small" screws. 2. What types of assembly applications typically use small screws (e.g., portable electronics; eyeglasses; hearing aids; etc.)? Examples of... Read More

Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage, Mounting & Attaching Products, Portable Tools, Services

REGO-FIX® to Highlight New Precision Tooling Products at WESTEC

Jun 03, 2015

INDIANAPOLIS, Ind., – At WESTEC 2015 to be held Sept. 15- 17 at the Los Angeles Convention Center, REGO-FIX Tool Corporation will showcase three of its newest precision tooling products. On display in Schenk Intertech’s booth 1035 will be the powRgrip® 9500, a smaller sized, automatic clamping unit; secuRgrip®, an anti-pullout tool holding system; and intRlox®, a small, but mighty... Read More

Fasteners & Hardware, Fluid & Gas Flow Equipment

Radial Shaft Seal Ring targets tire pressure control systems.

Jun 02, 2015

Featuring 2 sealing lips, Simmerring Central Tire Inflation Seal is designed for pressures up to 8 bar and circumferential speeds up to 10 m/s. Primary seal lip is made of wear-proof, glass-fiber-reinforced PTFE that handles sealing against air, reducing pressure on second seal lip, which is made of fluorocarbon rubber or nitrile rubber with Shore hardness of A 72. Connection between PTFE seal... Read More

Fasteners & Hardware, Portable Tools

Indexable Cutting Tool Grade offers optimized wear resistance.

Jun 02, 2015

Optimized for steel machining (ISO P), roughing forged components, and extended production runs, WPP05S combines Tiger·tec Silver® coating with optimized aluminum oxide microstructure. Post-coating treatment that promotes reliability and toughness and reduces downtime due to chipping, and substrate delivers resistance to plastic deformation. This wear-resistant and indexable insert... Read More

Fasteners & Hardware, Material Handling & Storage, Non-Industrial Products

Worksite Organizers can trigger metal detectors.

Jun 01, 2015

Used to keep gloves, rags, keys, and other items nearby, dual clip style Squids® 3400MD and belt clip-style Squids 3405MD are metal detectable grabbers constructed using stainless steel metallic powder throughout. This ensures detection if even smallest piece breaks off and helps prevent products from becoming harmful foreign objects in such areas as manufacturing and food processing... Read More

Fasteners & Hardware

Brass SMT Fasteners enhance PCB electrical, mechanical attachment.

Jun 01, 2015

PEM® ReelFast® brass surface mount fasteners include tin-plated Type SMTSOB™ brass nuts and spacers/standoffs suited for PCB applications requiring optimal electrical and mechanical attachment points. Permanently and concurrently installed with other SMT components on PCBs of any hardness and as thin as .060 in. prior to automated reflow solder process, these corrosion-resistant and... Read More

Fasteners & Hardware

Compact Rotary Latch does not produce noise, vibration.

May 28, 2015

Available in corrosion-resistant steel, R4-10 Rotary Latch with Integrated Bumper occupies minimal space within enclosure to provide concealed latching and increased security. Integrated rubber bumper eliminates noise and vibration caused by normal operation. While both single- and 2-stage options provide secure latching, 2-stage option is designed specifically to prevent false latching... Read More

Fasteners & Hardware, Plant Furnishings & Accessories, Transportation Industry Products

To Avoid Corrosion, RDS Dock Systems Provides Stainless Steel and Aluminum Dock Parts Not Galvanized

May 22, 2015

Franklin NH — RDS Dock Hardware (www.rdsdockhardware.com) has the most complete line of easy-to-assemble, durable and affordable dock parts in the country. Unlike galvanized dock hardware, RDS dock parts are made from aluminum or stainless steel, to provide life-long, corrosion-free service in either salt or freshwater.  And while the latest... Read More