Threaded Fastener Inserts

Hydropneumatic Tool hastens blind threaded insert installation.
Threaded Fastener Inserts

Hydropneumatic Tool hastens blind threaded insert installation.

Operating on 90 psi air pressure, Atlas® RIV949 accelerates and facilitates installation of blind threaded inserts. Installation can be accomplished without access to both sides, and inserts provide strong and reusable threads upon installation to accommodate mating hardware for final component attachment. Offering pull-to-pressure or pull-to-stroke modes, hydropneumatic tool can be equipped...

Read More »
Threaded Fastener Inserts

RoHS-Compliant Rivet Nuts help resolve alignment issues.

Facilitating accurate attachment of components in off center applications, RIV-FLOAT®-SHORT rivet nuts allow manufacturers to account for tolerance stack up and resolve alignment issues during product assembly. Knurls increase spin out resistance in soft materials, and design allows installation from front side of work piece. Fastening technology is designed for post installation in applications...

Read More »

Non-Magnetic Fasteners from Yardley Products Provide Ideal Metal Insert Solution for MRI Equipment and Other Sensitive Electronics
Threaded Fastener Inserts

Non-Magnetic Fasteners from Yardley Products Provide Ideal Metal Insert Solution for MRI Equipment and Other Sensitive Electronics

Non-magnetic fasteners from Yardley Products provide ideal metal insert solution for MRI equipment and other sensitive electronics Yardley, PA - Yardley Products Corporation, a manufacturer of threaded metal insert fasteners, has been producing non-magnetic brass inserts for use in MRI machines and sensitive electronics equipment for nearly five years. In addition to being made in the USA,...

Read More »
Blind Threaded Inserts offer corrosion resistance.
Threaded Fastener Inserts

Blind Threaded Inserts offer corrosion resistance.

Providing permanent threads in thin panel sections down to .020 in., Atlas® MONEL® Type AEKM Inserts are suited for attachment applications where equipment or components are exposed to harsh conditions. Nickel-copper alloy 400 fasteners feature minimized profile head allowing for near-flush installations without special hole preparation. Available in thread sizes of No. 6-32 through 3/8-16 and...

Read More »
Whitepaper: 7 Trends for IoT in Hospitality
Sponsored

Whitepaper: 7 Trends for IoT in Hospitality

The Internet of Things is rapidly becoming a defining characteristic in the daily landscape of human experience. Billions of smart devices are already connected to this vast system through smart homes, medical devices, and much more; the trend is predicted to continue its exponential growth into the hundred billions within the next few years. This white paper illuminates how the future of IoT will completely revolutionize the way the hospitality industry in particular will function with this new technology. Due to the ability to reduce energy costs, reduce staff labor, and create completely individualized and engaging guest experiences, the hospitality industry is in a unique position to capitalize on IoT. Using real life case studies, the report outlines seven ideas for how the IoT can be used to reduce energy consumption, increase guest satisfaction, improve maintenance, and more.

Read More »
Threaded Fastener Inserts

Yardley Products Provides Custom Threaded Inserts for Milkshake Blenders

Yardley, PA - Yardley Products, a manufacturer of precision engineered threaded metal inserts for a wide range of fastening applications, provides custom solutions for a variety of industries. Through a partnership with MCM Composites, a certified custom molder of thermoset plastic parts, Yardley has supplied threaded metal inserts for a variety of products, including milkshake blenders, oven...

Read More »
Threaded Fastener Inserts

MS/NAS Threaded Inserts, Key Locking Stud Fasteners and Thinwall Threaded Insert Products Now Available from Acme Industrial Company

CARPENTERSVILLE, IL - Acme Industrial Company, a subsidiary of Jergens, Inc., has announced that three of its product lines are now available to meet Military Specification Standards. The company's MS / NAS Style Threaded Inserts are produced to MS51830, MS51831, MS51832, NAS1394, NAS1395, NAO146, NAO147, NAO148, NAO149, NAO150 AND NAO151. In addition, its Swage-Sert(TM) Thinwall Threaded Inserts...

Read More »
Blind Threaded Steel Inserts have straight shank design.
Threaded Fastener Inserts

Blind Threaded Steel Inserts have straight shank design.

Atlas® Plus+Tite® inserts include version with straight shank design that offers pullout resistance when installed permanently in plastics or thin sheet metal. Design provides reliable and reusable threads for blind attachment applications, where only one side is accessible for fastener installation and component assembly. Single mating screw completes final attachment process. Inserts install...

Read More »

Sherex Fastening Solutions is Issued RIV-FLOAT
Threaded Fastener Inserts

Sherex Fastening Solutions is Issued RIV-FLOAT

May 28, 2010- Sherex Fastening Solutions, an industry leader in the manufacturing and distribution of blind rivet nuts announced today that the United States Patent and Trademark Office has issued US Patent number 7,713,011 covering the Sherex technology of its innovative rivet nut, RIV-FLOAT® with internally floating threads. The patent covers the technology in a fastener assembly having...

Read More »
Threaded Fastener Inserts

Concrete Anchor is used to connect barrier reflectors.

MB Barrier Reflector Connector features reusable channel, available in standard and custom lengths to fit various precast form lengths, that eliminates need for on-site drilling. Custom channel lengths also provide on-site adjustability of glare screens, promoting worker safety while minimizing installation efforts. Corrosion-protected solution offers other features, such as hot rolled channel...

Read More »
Blind Threaded Inserts are offered in M3 to M10 thread sizes.
Threaded Fastener Inserts

Blind Threaded Inserts are offered in M3 to M10 thread sizes.

Suited for blind attachment applications where only one side of panel is accessible for hardware installation, ATLAS® FM(TM) inserts install into metric size round/hex holes in panels as thin as 0.51 mm, with only single mating screw. They can be specified in variety of head styles (flat, thin, or countersunk), body types (round smooth or knurled, half hex, or full hex), and materials (steel,...

Read More »
Fresh Air Intake
Sponsored

Fresh Air Intake

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics