Fasteners & Hardware

New Eye Hoist Hooks Come with Yellow Chromate Finishing
Hooks

New Eye Hoist Hooks Come with Yellow Chromate Finishing

Campbell’s Eye Hoist Hooks are available in carbon steel (blue or galvanized) or alloy steel (orange) with 5:1 design factor. The units come with high-strength steel latch with reinforcing rib and a spring assembly that ensures the latch is held against hook to securely retain slings. The hooks feature dual forged support bosses for precise latch/hook engagement.

Read More »
New Adapter Kits Facilitate More Efficient Lifting
Adapters

New Adapter Kits Facilitate More Efficient Lifting

Stertil-Koni's two newest adapter kits are engineered for improved efficiency in bus and truck support. They provide more efficient lift by engaging the front and rear lifting points on buses and trucks, offering support for a larger range of axles. One of the new adapters ktis has been engineered expressly for transit buses, while the other is capable of supporting both trucks and school...

Read More »
New SuperSleeve Wall Sleeves Come with Stainless Steel Anchoring Screws
Sleeves

New SuperSleeve Wall Sleeves Come with Stainless Steel Anchoring Screws

Marketair’s SuperSleeve Wall Sleeves are designed for insulated linesets, electrical/communications cabling and condensate drain hose. The 7.5 cm diameter sleeves can be flanged on both ends and telescopes from 15 to 30 cm. SuperSleeve comes with internal positive slope guide, an integral corrugated PVC cable guide for separating electrical/communications wiring from the linesets and drain hose...

Read More »
New P4 Roll-On Leveler Offers a Capacity of 2500 lbs
Levelers

New P4 Roll-On Leveler Offers a Capacity of 2500 lbs

The P4 Roll-On Leveler with built-in turntable rotates a full pallet load 360˚ to enable workers to build or break down loads from fixed position. The unit features 44 in. x 48 in. turntable platform that can accept variety of open bottom skid or pallet sizes. Leveler’s platform can be raised to a height of up to 30 in. using footswitch or hand pendant control. The unit provides accessibility...

Read More »
New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components
Inserts

New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components

Walter offers WSM01 Grade coupled with MS3 negative geometry for producing burr-free results with an improved surface finish quality in the hard materials. The grade's high power impulse magnetron sputtering PVD coating produces smooth surfaces. The Unit is suitable for machining ISO S materials such as titanium alloys, cobalt-based alloys and nickel-based alloys. The MS3 insert comes with...

Read More »
New GN 115.9 Latches are Compliant to RoHS Standards
Latches

New GN 115.9 Latches are Compliant to RoHS Standards

JW Winco’s GN 115.9 Latches feature 15 different offsets that allow latch distance A to be set between 4 and 32 mm. Units are offered with zinc die cast housing with zinc plated finish and the plastic locating ring coated black with a textured finish. Latches come with a push-to-turn safety function that secures spindle in place. Unit can be turned 90° by pressing down the operating element.

Read More »
New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components
Inserts

New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components

Walter offers WSM01 Grade coupled with MS3 negative geometry for producing burr-free results with improved surface finish quality in the hard materials. The grade's high power impulse magnetron sputtering PVD coating produces smooth surfaces. Unit is suitable for machining ISO S materials such as titanium alloys, cobalt-based alloys and nickel-based alloys. MS3 insert comes with jet-guiding...

Read More »
New ELX Series EtherCAT Terminals Come with Safe Signal Transmission and Functional Safety Capabilities
Miscellaneous Terminals

New ELX Series EtherCAT Terminals Come with Safe Signal Transmission and Functional Safety Capabilities

Beckhoff’s ELX Series EtherCAT Terminals with two or four analog input channels for RTD resistance sensors, thermocouples/mV and strain gauges. These terminals come with built-in TwinSAFE SC technology. The terminals are compliant to ATEX and IECEx standards and are suitable for applications in hazardous areas. The TwinSAFE SC technology allows the user to use standard signals for...

Read More »
New ATLAS SpinTite Threaded Inserts Come with Blind Installation Capability
Inserts

New ATLAS SpinTite Threaded Inserts Come with Blind Installation Capability

ATLAS® SpinTite Blind Threaded Inserts are available in half-hex shank low-profile head, rib-wall minimized-profile head, rib-wall low-profile head, thin-wall low-profile head and swaging low-profile head versions. Units are used with panels or sheets of materials such as metal, plastics, and fiberglass with thickness up to 0.51 mm. Suitable for applications such as tubing and extrusions,...

Read More »
New CONFAST Double Expansion Anchor is Made from Zamac Alloy
Anchors

New CONFAST Double Expansion Anchor is Made from Zamac Alloy

CONFAST Double Expansion Anchor features two cones, one with threading and other without threading. Unit is used for anchoring into concrete, brick or block base material. The anchor comes with two spring steel bands that allow expansion of the anchor against concrete at two points. Anchor is resistant to rust and is offered in diameter of ¼, 5/16, 3/8, ½, 5/8, and ¾ in. and hole diameters of...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics