Suncor Stainless Presents 233 Stainless Steel Products Qualified Under Military Specification MIL-DTL-32655
Plymouth, Massachusetts, May 28, 2021 - Suncor Stainless, Inc. has qualified 233 corrosion resistant stainless steel products under military specification MIL-DTL-32655. The 233 products are all available for commercial use and their qualification to MIL-DTL-32655 demonstrates SuncoKs commitment to quality standards and customer satisfaction. Suncor Stainless provides one of the most complete...
Read More »
Saf-T-Gard Receives High Honors for Two New Voltgard® Products
Voltgard® V-GRIPS® Leather Protector Gloves and Voltgard® Telescopic Insulated Rescue Body Hook Are Recognized by ISHN and EC&M Magazines for Innovation in PPE and Excellence in Product Development August 31, 2020 – NORTHBROOK, IL – Saf-T-Gard International, Inc., a full-line, global industrial safety solutions supplier bringing workers home safely for more than 80 years, was recently...
Read More »
New HPH J-Hooks are UL Listed, Plenum-Rated, RoHS and TIA Compliant
Available in red, blue, and black colors that are designed with reusable snap-lock latch for securing cable. Features steel beam clamp and right angle powder actuated. Offers vertical overhang for “C” Purlin and angled overhang for “Z” Purlin.
Read More »
RUD ROV Hooks for Subsea Installations
Oceaneering International, Inc. (Oceaneering) used four 10-tonne capacity remotely operated vehicle (ROV) hooks from RUD to fulfill two major subsea contracts recently — both in the Gulf of Mexico. The products were sourced from RUD distributor LiftPull. First, Oceaneering used the hooks to install long baseline (LBL) transponder frames, weighing 2,000 lbs. each, at specified subsea locations....
Read More »
NVH Materials Guide
Noise, Vibration, and Harshness (NVH) refers to the study of noise and vibration for the purpose of modifying equipment for quieter, safer operation.
Read More »
New 3.3K Remote Cargo Hook Available with Retrofit Kit
Able to work with wide variety of load ring sizes and styles. Allows operators to convert their existing TALON 3.3K Remote Cargo Hooks into keeperless hooks as needed. Can be reconfigured into either the keepered or keeperless version by the factory during the standard overhaul or repair process.
Read More »
Onboard Systems Weighing Kit with C-40 Cockpit Indicator for Airbus Helicopters H125/AS350 B3 Certified by FAA
VANCOUVER, Wash., Aug. 6, 2019 /PRNewswire/ -- Onboard Systems International, LLC, a leading provider of innovative helicopter cargo hook equipment, today announced that its new C-40 Cockpit Indicator has been certified by the FAA for use in one of Onboard's load weighing kits for the Airbus AS350 (H125) helicopter. Onboard has also submitted this kit to Transport Canada and EASA for...
Read More »
Onboard Systems Medium Bell Cargo Hook Kits with Surefire Option Certified by FAA
VANCOUVER, Wash., Aug. 1, 2019 /PRNewswire/ -- Onboard Systems International, LLC, a leading provider of innovative helicopter cargo hook equipment, today announced that its Surefire® Release Technology cargo hook kits for the Bell 204, 205, 212 and 412 aircraft have been STC certified by the FAA and now available for worldwide installation. The Surefire circuit requires a purposeful,...
Read More »
New RESCUE 8T Body Hook Coated and Heat-Treated with 18 Opening
Extends up to 8’ for the emergency rescue of injured personnel and collapses to an overall length of 43”. Designed to comply with OSHA 1910.269(j) for the construction of live line tools and OSHA 1926.957 for the use of live line tools. Mounted on an 8’ telescopic fiberglass handle to rescue workers from confined spaces, in vaults, near electrical cabinets or switch gear.
Read More »
Harrington Hoists Introduces HFH Fork Truck Hook That are Designed to Lift and Carry Loads
Available to fit fork widths of 5¼ to 7 in. and 3¼ to 3 in. in height with a capacity of 1½ Tons. Proof-Tested to 125% capacity and has a specified fatigue life of 100,001 to 500,000 load cycles. Attaches to forks and is engineered and manufactured to ASME B30.20 & BTH-1 Design Category B Service Class 2.
Read More »
Onboard Systems Dual Cargo Hook Kit for the MD500 Certified by FAA
VANCOUVER, Wash., Feb. 26, 2019 /PRNewswire/ -- Onboard Systems International, Inc., a leading provider of innovative helicopter cargo hook equipment, today announced that its Dual Cargo Hook Kit for the MD500 series has been STC certified by the FAA. This cargo hook system meets the 14 CFR part 27 certification requirements for Human External Cargo (HEC) and has been built around a dual...
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
