ECO Standoffs are suitable for public spaces.
Frameware’s ECO Tamper Proof Standoffs are offered in polished stainless (PSS), brushed stainless (BSS) finishes. Units use set screw for locking the cap after installation. Each standoff comes with #6 flathead screw and drywall anchors.
Read More »
microPEM® MSOFS™ Flaring Standoffs are compliant to RoHS Standards.
microPEM® MSOFS™ Flaring Standoffs feature can be installed permanently into stainless steel, plastics and printed circuit boards. Units are available in thread sizes #0-80, #2-56, and M1 to M2 with reusable threads and are suitable for wearables, laptops, tablets and eReaders, smartphones, automotive electronics applications.
Read More »
PEM SMTSSS ReelFast SNAP-TOP Standoffs are made of carbon steel material.
PEM® SMTSSS™ ReelFast® SNAP-TOP® Standoffs are used to secure print circuit boards in assembly. These unthreaded units are available in unified lengths of .250 in. or .375 in. and metric length of 6 mm, 8 mm or 10 mm. Products can be used with boards and panels of .060 in and 1.53 mm size. Standoffs are compatible with SMT automated installation equipment.
Read More »
PEM® Type MSO4(TM) microPEM® Self-Clinching Standoff Fasteners Mount and/or Space Components in Compact Electronic Assemblies
Mount and/or Space Components in Compact Electronic Assemblies PEM® Type MSO4™ microPEM® self-clinching standoff fasteners from PennEngineering® enable components to be mounted and/or spaced in compact electronic assemblies, especially suiting applications where space may be extremely limited for attachment hardware.Â- These stainless steel fasteners install easily into...
Read More »
Workwear Goes Hand-In-Hand with Employee Satisfaction and Retention
High-quality gear reminds employees that they are valued by their employer and improves their workday. To find out more about choosing the best workwear, download now.
Read More »
Bearing Stand-Offs feature one-piece design.
Engineered for System Plast™ flanged mounted bearings and Sealmaster® composite-flanged PN Gold bearings, Single-Piece Stand-Offs integrate bolt-spacer ferrule and stand-off in one assembly for sanitation compliance in food/beverage operations. Design eliminates loose parts during installation, optimizes bearing alignment, and creates 5/8 in. gap behind bearing flange for...
Read More »
Uniquely Designed Variations of PEM® Self-Clinching Threaded Nuts, Studs, and Standoffs Allow for Close-to-Edge Placement Where Space for Fasteners is Limited
Uniquely designed variations of PEM® self-clinching nuts, studs, and standoffs from PennEngineering® allow for close-to-edge placement in thin metal assemblies without compromising host sheet or fastener.Â- Their engineering effectively reduces the standard minimum distance for hole-centerline-to-edge" required for successful clinching to provide ideal solutions where space for...
Read More »Brass SMT Fasteners enhance PCB electrical, mechanical attachment.
PEM® ReelFast® brass surface mount fasteners include tin-plated Type SMTSOB™ brass nuts and spacers/standoffs suited for PCB applications requiring optimal electrical and mechanical attachment points. Permanently and concurrently installed with other SMT components on PCBs of any hardness and as thin as .060 in. prior to automated reflow solder process, these corrosion-resistant and...
Read More »
Outwater Introduces Many New Woodworking Products at the 2014 International Woodworking Fair (IWF)
Bogota, NJ (www.outwater.com) – Outwater [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC featured many new woodworking products at the 2014 International Woodworking Fair proposed to effectively address and respond to the necessity for woodworkers to improve their productivity and increase their revenue in a progressively more competitive marketplace. Â The...
Read More »Self-Clinching Standoffs suit thin stainless steel assemblies.
Manufactured from heat-treated 400 Series stainless steel, PEM® Type TSO4™ standoffs are used for stacking or spacing components to or from ultra-thin stainless steel panels as thin as .025 in. and with max hardness of HRB 88 on Rockwell B scale or HB 183 on Brinell scale.Â- Hardened stainless fasteners install permanently; one mating screw is required for final component attachment....
Read More »
Heat Sink Mounting System ensures optimum heat dissipation.
Comprising Type HSCB™ captivating screw and Type HSL™ spring mated to Type HSR™ broaching receptacle nut or standoff, PEM® Heat Sink Mounting System securely attaches heat sinks to circuit boards while providing firm and constant contact to chip component. System integrates audible click feature to prevent over tightening during installation, accommodates slight expansion and...
Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.
Read More »
