JW Winco Introduces Two Design Awards for Ganter

JW Winco Introduces Two Design Awards for Ganter

Ergonomic, highly functional, and visually at its best. With a new stainless steel design series, Ganter sets the tone - and receives the German Design Award and the iF Design Award. Industrial design has been a key quality feature for capital goods for quite some time. After all, design ensures a brand-appropriate product appearance, optimizes functionality and ergonomics, and even lowers...

Read More »
Maximum Corrosion Resistance: Standard Parts of AISI 316L (A4) Stainless Steel

Maximum Corrosion Resistance: Standard Parts of AISI 316L (A4) Stainless Steel

Good corrosion resistance is essential when using metal parts in aggressive environments. JW Winco therefore now offers even more standard parts in the higher quality Stainless Steel grade AISI 316L (A4). Increased resistance to aggressive conditions is an ever more critical feature in a wide range of industries. As a result, corrosion resistant AISI 316L (A4) stainless steel is gaining in...

Read More »
Self-Clinching Nuts install with minimal footprint.

Self-Clinching Nuts install with minimal footprint.

Combining .065 in. height and .220 in. diameter with closed-to-edge mounting capabilities, PEMÂ-® Type SMPP™ Nuts install permanently in stainless steel sheets as thin as .025 in. Upon installation, serrated clinching ring prevents nut from rotating in service. Nuts are made from age-hardened A286 stainless steel and recommended for use in stainless sheets with hardness of HRB 90/HB 192 or...

Read More »
Runout Compensation Nuts correct runout errors, misalignment.

Runout Compensation Nuts correct runout errors, misalignment.

Offered in 5 sizes, easyZERO replacement nuts correct runout errors and misalignment for all round tools using ER16–ER40 collets. There are 6 adjustment screws that allow for up to 0.011 in. runout to be dialed in to promote accurate machining, tight tolerances, and surface finish quality. Due to concentric cutting, all cutting edges share chip load equally and consequently increase tool life....

Read More »
Anti-Backlash Nut fits 2 mm diameter screws.

Anti-Backlash Nut fits 2 mm diameter screws.

Available with optional TFE-coated screw, Micro Series ZBM Nut utilizes special nut thread system that, when combined with radial force, provides simple backlash compensation.Â- Nut can be customized to specific applications that require unique geometry and custom materials, such as KerkiteÂ-® composite polymers. Initially designed for optics-focusing market, product performs well in...

Read More »
Round and Square Hole Cage Nuts have snap-in design.

Round and Square Hole Cage Nuts have snap-in design.

OCN Series facilitates mounting ofÂ- equipment into square or round holed 19 in. racks. Heavy-duty, black zinc-plated products promote strength-to-weight ratio and provide flexibility to mount anywhere with metric or SI bolts. Available in M6, 10–32, and 12–24 thread sizes, cage nuts are specifically designed for mounting Orion's speed controller, programmable thermal controller, and...

Read More »

Seginus Inc. is Pleased to Introduce the 1600273-002EH Seal Nut

The PN 1600273-002EH is eligible for installation on Various Pratt Whitney Power Plants. The Seal Nut is used in the Aero Controlex Group Turbine Case Cooling Control Valve (TCC Valve) control cable part numbers 1605140-002 and 1606130-001. Pratt Whitney Model Eligibility: The TCC cable assembly is installed on Pratt & Whitney PW4 Series Motors. For more specific model eligibility details, please...

Read More »

Seginus Inc. is Pleased to Introduce the M62290-4EH, M62290-6EH, M62290-10EH Jam Nuts

The M62290-4EH, M62290-6EH, M62290-10EH are eligible for installation on Various Pratt & Whitney Power Plants. The Jam Nuts are used in the Aero Controlex Group Turbine Case Cooling Control Valve (TCC Valve) control cable part numbers 1602020-001, 1604220-001, 1605140-001, 1605140-002, 1606130-001, and 1606130-002. Pratt & Whitney Model Eligibility: The TCC cable assembly is installed on Pratt &...

Read More »
Uniquely Designed Variations of PEM-® Self-Clinching Threaded Nuts, Studs, and Standoffs Allow for Close-to-Edge Placement Where Space for Fasteners is Limited

Uniquely Designed Variations of PEM-® Self-Clinching Threaded Nuts, Studs, and Standoffs Allow for Close-to-Edge Placement Where Space for Fasteners is Limited

Uniquely designed variations of PEMÂ-® self-clinching nuts, studs, and standoffs from PennEngineeringÂ-® allow for close-to-edge placement in thin metal assemblies without compromising host sheet or fastener.Â-  Their engineering effectively reduces the standard minimum distance for hole-centerline-to-edge required for successful clinching to provide ideal solutions where space for...

Read More »
PEM-® Self-Clinching Blind Nuts Feature 'Closed-End' Design

PEM-® Self-Clinching Blind Nuts Feature 'Closed-End' Design

Providing Protection for Nut Threads and Internal Components PEMÂ-® self-clinching blind nuts from PennEngineeringÂ-® permanently install into thin metal sheets to provide reliable and re-usable metal threads for accepting mating screws and completing final component attachment in an assembly.Â-  Their blind , closed-end design effectively creates a barrier to protect the nut's...

Read More »

All Topics