Electronic Components & Devices

MOSFETs feature electrically isolated mounting.

IXUC100N055, IXUC200N055 and IXUC160N075 Trench Power MOSEFETs possess high current ratings of 100, 200 and 160 A, respectively. IXUC100N055 and the IXUC200N055 are rated at VDS (Drain Source Voltage) equal to 55V, while IXUC160N075 has VDS rating of 75V. All are housed in hole-less packages that conform to TO-220 outline. Frame is direct-copper-bonded alumina with 2500V isolation. Maximum...

Read More »
Connectors and Adapters meet FCC Part 15 regulations.

Connectors and Adapters meet FCC Part 15 regulations.

TNC males with reverse threads include RT-1202-C crimp connector for RG-58/U cable and RT-1227 reverse thread TNC male to reverse thread TNC female right angle adapter. Reverse thread SMA females include RT-1142 adapter with reverse threaded SMA female on one end and standard BNC female on other end. Nickel plated RT-1005-C reverse thread N male crimp connector is for RG-58/U and gold plated...

Read More »

Heat Shrink Terminals provide environmental seal.

Heat Shrink Terminals increase mechanical and electrical connections by adhering connector and wire insulation. Adhesive seal provides harsh environment protection resisting rainwater, salt water, dust, chemical corrosion, acids, solvents, fuel, oil and abrasions. One-piece tin plated barrel with V groove provides maximum electrical conductivity, corrosion resistance, and excellent current flow.

Read More »
Photodiode Arrays are designed for scanning applications.

Photodiode Arrays are designed for scanning applications.

EPA-4400 Series consists of 8, 16, and 32 element photodiode scintillator arrays featuring high sensitivity of 400-1080 wavelength and uniform response of 0.30 A/W. Element size is 1.49 x 3.61 mm with element spacing of 1.587 mm. Arrays are suitable for X-ray and scanning applications such as spectroscopy, security systems, and baggage scanners.

Read More »

Crystal Oscillator works in high-speed digital systems.

SD-A2920 Series Differential PECL Fast Edge Model is available in frequency ranges from 75.0 MHz to 200.0 MHz, making it suited for wideband frequencies such as Fibre Channel, Gigabit Ethernet, Infiniband, 10 Gbit, and Sonet. Supply voltages of 3.3 and 2.5 V are available. Applications include high speed, low jitter components, such as mainframes, storage, servers, workstations and networks.

Read More »
Square Continuous Posts accommodate any centerline.

Square Continuous Posts accommodate any centerline.

AMPMODU square posts can be inserted into printed circuit boards in virtually any configuration. Post is constructed of brass, comes packaged on reel, and is notched at desired length. Carrier strip is not required. Posts are available in 0.025 and 0.045 post sizes, in lengths of 0.400 to 1.0 in. in 0.010 in. increments, with tin or gold plating. The 0.025 square post is rated for up to 3A while...

Read More »

BGA Sockets come with pitches of 1.00 or 1.27 mm.

Model BGA adapter has 3 polarizing locating pins for alignment of adapter with socket and 3-finger female contacts that provide wiping action. Socket has stamped and formed contact pins. When mated together, socket and adapter measure only 0.125 in. high. Extremely low insertion and withdrawal forces provided by gold-plated mating contact system, make socket and adapter suitable for high I/O or...

Read More »
Plugs and Connectors identify power status.

Plugs and Connectors identify power status.

Power Light(TM) (PL) Plugs and Connectors glow through transparent lenses when power is ON. When devices are de-energized, and current is no longer present, power light switches OFF. Units are available in 15, 20 and 30 Amp 125 Volt straight-blade and locking configurations. 15 and 20 Amp straight-blade versions feature green neon bulb rated at 30,000 hours. 20 and 30 Amp locking devices feature...

Read More »
LED Light Pipe has thru-hole and surface mount versions.

LED Light Pipe has thru-hole and surface mount versions.

Comprised of wide angle lens and flexible light pipe, FLP-O Series features oval shaped lens cap assembly with visible area of 0.125 in. (W) and 0.250 in. (L). Light pipe assembly provides capability for extending LED lighting to display and indicator panels up to 328.0 ft. Available Super-bright colors include Red, Green, Blue, Yellow and Amber; Ultra-bright colors include White, Blue, Turquoise...

Read More »

All Topics