New Electronic Components & Devices Products

Holding Assemblies are used in metal product manufacturing.

Permanent Magnetic Holding Assemblies are designed for positioning, stabilizing, holding, and feeding materials, parts, and scrap. Various standard configurations and sizes are available with insulated Ceramic, Alnico, and Rare Earth Magnets. Assemblies for watertight and high-temperature applications are also available.

Bandpass Filter is suitable for digital applications.

Model 14584 passes single channel signals while providing rejection to adjacent channels, and is used in CATV, LAN, MDU, MSO and network applications. It offers high adjacent channel selectivity while maintaining low differential group delay specification. Unit features return loss greater than 18 dB over full video or audio range. Bandwidths of 4, 5, or 6 MHz are available for any CATV channel...

Contactor/Controller is available with load diagnostics.

Model 7100S single-phase Solid State Contactor/SCR Power Controller is rated from 16 to 100 amps, 100 to 500 Vac with AC logic, DC logic or 4-20mA control input. It is suitable for fixed resistive heating applications such as plastic processes, environmental chambers, industrial ovens and infrared heating. Optional load diagnostics monitor SCR failure, total load failure, and partial load failure.

Digital Weight Indicator holds up to 200 measurements.

Model 220 supports digital fill control, checkweighing with 5 preset weight comparators, and piece count functions without programming. It powers up to 14 load cells, and has 12 digit display, NEMA 4X/IP66 enclosure for use in harsh environments and wash down applications, transflective liquid crystal display with backlighting, and alphanumeric keypad and display.

Water Softening Systems

Learn more about how water softener systems function, the many advantages they offer, and how water softeners from Reynolds Culligan can support your business

Modular Jack fits on printed circuit board.

CAT5 modular RJ45 jack can be used in high-speed networking and communication applications such as Ethernet, LANs, hubs, and routers. Jack is made of gray PBT thermoplastic, has standard contacts that are gold flash or plated with 50Ã-µ gold, and is fully shielded to reduce EMI/RFI. Slim profile allows for positioning flexibility on PC board. Total height of the connector is 0.650 in.

Filtered Modules incorporate 3 functions in 1 package.

Three-function modules combine IEC 60320 sheet C14 power inlet, fuse carrier for 1/4 x 1-1/4 in. and 5 x 20 mm fuses, and 6A RFI/EMI filter. Current carrying parts are not operator accessible when cordset is engaged in power inlet, minimizing chance of electrical shock. Modules carry UL, CSA, and VDE approvals.

Surge Protectors are UL 1449 2nd edition listed.

SurgeGuard AC surge protection products are designed to protect all ANSI/IEEE locations, telecommunications equipment, and sensitive electronics. They are available up to 600 VAC with surge current ratings up to 280 kA per phase. Units feature NEMA 12 enclosures and power and fault indicators with replaceable modules. Integral disconnect, dry contacts, audible alarm, and weatherproof enclosures...

Ceramic Capacitors feature high self-resonant frequency.

HFC Series ceramic capacitors are available in sizes 1005, 1410, 1608, 1610 and 1612. Single layer ceramic substrate construction ensures non-polarity, making units suitable for use in AC circuits where polarity may reverse. Termination material is 100% tin, and operating temperature range is -55Ã-

Op Amps offer supply voltages from +/-2.5V to +/-9V.

MIC918 and MIC919 high speed op amps achieve slew-rates of 1500V/Ã-µs while consuming 550Ã-µA and 360Ã-µA, respectively. Both op amps are voltage-feedback, unity-gain stable devices housed in SC70-5 packaging. Gain-bandwidth product for MIC918 and MIC919 is 51MHz and 27MHz, respectively. Both Op Amps have 60 degrees of phase margin at unity gain that increases with load capacitance....

Headers and Sockets are available in various heights.

PTT Series press fit 2mm pitch headers and PTF Series sockets provide board-to-board spacing of 8,36mm when mated. Elevated version of PTF socket provides mated height of 11,15mm. Dual row interconnects are available in any number of positions per row up to 50. ESQT Series interconnects meet all PC 104+ specifications by providing 4 rows x 30 positions; 9,35mm socket height; and both...

Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions

Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.