LGA/BGA Socket offers optional built-in bias springs.
Land grid array/ball grid array (LGA/BGA) socket, suitable for ASIC applications, offers pressure mount contacts on top and bottom. Made from beryllium-copper alloy, with 30 micro in. gold per MIL-G-45204 over 50 micro in. nickel per QQ-N-290, socket also incorporates liquid crystal polymer (LCP). LGA/BGA socket is available in custom materials, plating, sizes, and configurations.
Read More »
Filter Cartridges are impervious to water.
HilcoÃ-® PH Filter Cartridges have double-screened, synthetic media and are suitable for filtration of steam turbine lube and hydraulic oils. Corrosion-resistant cartridges feature external hold-down spring, O-ring seal and metal end-caps and center tube. They are operational to 100 psid and 250 deg F.
Read More »
Turning and Milling Inserts are PVD coated.
SpectraTurn(TM)and SprectraMill(TM) inserts are coated with TiAln or AlTiN for edge strength and wear resistance. Heat produced in cutting process is carried away by chip. TiAlN coated insert grades are suitable for dry milling and for high-speed turning. AlTiN coated inserts are ideal for milling titanium and titanium alloys.
Read More »
Automatic Tower Press provides 2-sided filtration.
Totally enclosed Hoesch DS uses polypropylene membranes arranged so that filter cake only contacts filter cloth. Cake discharge is to one side only for easy product recovery. Press is constructed of stainless steel and polypropylene, with other options available. Filters are available in sizes from 19 to 1720 sq ft filtration area. Chemical-processing applications include solvent-wetted processes...
Read More »
Strain-Gage Interface Card handles multiple channels.
AP814 allows 8 strain gage quarter-bridges to be connected in regulated 3-wire circuit so cable resistance effects are fully compensated. All 8 channels operate simultaneously, without scanning or multiplexing. Four excitation voltages are available, providing measuring range of 4-80 mV/V. Gage or bridge factors can be set directly. Measurement-without-Excitation mode allows user to distinguish...
Read More »
Rectifier incorporates PC board.
Model 51000 is rated at 24,000 Volts Peak Inverse Voltage at 2.5 Amperes average current, with 300 FPM airflow. PC board optimizes thermal conditions, allowing max current at safe operating temperature. Joining 2 rectifiers provides full-wave bridge for output voltages up to 6 KV. Joining 3 units produces 3-phase, full-wave output to intermediate stages. Applications include DC pulse blocking and...
Read More »
Connectors provide zero insertion force terminations.
VDE-certified Eco-Lock connector systems are designed for flexible flat cable/fine-pitch connector applications. Locking cover may be retracted to reopen contacts. Connectors are available in 4-30 pole configurations for 1 mm pitch surface-mount version and 5-35 poles for 1.25 mm pitch fork-type contact version. Both styles are available in horizontal and vertical configurations.
Read More »
One-piece Interfaces connect to power boards.
OPP Series one-piece power interface, rated up to 5 A, eliminates bent pin problems of multi-component devices. Connectors are soldered to main board and power board is attached by either metric or English mechanical fasteners. Interfaces are available with choice of 3, 7 or 10 contacts on 0.100 in. pitch. Optional alignment pins can be provided on top, bottom or both sides to ease processing,...
Read More »
Current-Sensing Resistors minimize thermal expansion.
Surface-mount Series LR72 A/B/C resistors, with open-center shapes, offer tolerance of +/-5%, inductance value under 10nH, and resistance ratings as low as 0.002 ohms. Types A and B have TCR of +/-100 ppm/deg C and power ratings of 1/2 W @25 deg C and 1/4 W @25 deg C, respectively. Type C has TCR of +/-350 ppm/deg C and power ratings of 1 W @70 deg C and 2 W @25 deg C. Flameproof resistors have...
Read More »
High Voltage Capacitor handles up to 450 Vdc.
Type AEB aluminum electrolytic capacitor in surface mount package provides up to 5,000 hr load life at 105 deg C. It is available in 7 vertical cylindrical case sizes ranging from 10 x 13.5 to 18 x 21.5 mm. Unit has capacitance range from 2.2 to 100 microF, rated voltage from 160 to 450 Vdc, and operating temperature of -20 to +105 deg C. Ripple current ratings are over 1 amp at 100 kHz....
Read More »
DoorKing Releases Advanced Long Range Card Reader System with Frequency Hopping Technology
The DoorKing DKS AVI system is at the cutting edge of automotive security technology and represents a leap forward in engineering innovation. When it comes to long-range passive card readers, we lead the industry and set the standard for quality and performance. To find out why the DoorKing DKS AVI system is taking the automotive security industry by storm, see our video.
Read More »
