New Electronic Components & Devices Products

Embedded Board accommodates global positioning system.

GPS Carrier Board for PC/104-based embedded computer systems allows GPS receiver, such as Trimble ACE, Lassen SK II, or Motorola Oncore, to be mounted. It has dual CMOS-compatible TTL serial ports, 2 external battery-backup connections, low power consumption, 5 V operation, and dual signal connectors. By changing jumper settings, board can be configured to bypass PC/104 bus and use standard...

Filter Folder automatically assembles filter membranes.

EMF-42 folding machine automates production of filter membranes for reverse osmosis filters used to make brackish water and sea water potable. It combines membrane filter material with scrim material and folds it for use in filters. Machine unwinds, cuts to length, adheres scrim to membrane, and folds and discharges products in different sizes and quantities. Sizes range up to 42 in. wide x 96...

Optical Receivers suit OC-192/STM-64 applications.

R601APD and R602APD are APD versions of single-ended digital 2-R and differential 2-R optical receivers. They are suitable for 10G applications such as datacom, DWDM systems, SONET/SDH systems, and telecom short/intermediate/long haul systems. Both modules have sensitivity of -22 dBm typical at 9.9 Gb. R601APD has single-ended type K connector, and R602APD has dual, push-on GPPS/SSMP connectors.

Brass Inserts have hexagonal heads.

Series 40 through-hole and Series 44 blind-end hexagonal, molded-in, brass inserts are suitable for placement in plastic molds prior to plastic injection. They do not require specialized insertion tools, and are manufactured to simplify orientation and placement onto mold core pins. Hexagonal head provides bi-directional torque resistance and large undercut provides high-tensile strength.

What You Need to Know About Adhesive N-95 Respirators

This white paper provides an in-depth overview of what you need to know about adhesive N-95 respirators.

Cable Connectors eliminate cable twisting.

TEK-MATExtra hazardous-location cable connectors have compression inserts that provide pull-out protection, making them suitable for jacketed, metal-clad cable. Locking, sealing chamber and rain-tight NEMA 4 insert gives connectors capability to create true 360 deg grounding. UL-listed connectors are made of corrosion-resistant, copper-free aluminum with low-profile hex hub and red union nut....

Optical Receiver provides high sensitivity.

Model R402APD APD + TIA optical receiver, for 10 Gpbs applications, provides sensitivity of -26 dBm typical and is capable of driving variety of circuits, such as clock recovery, AGC or integrated time division demultiplexers. Module can be used in 80 channel/160 channel DWDM long haul systems, SONET/SDH systems, and telecom metro/short or medium reach systems.

I/O Card suits PC/104-based data acquisition.

Model 104-DIO-48S, 48-bit, parallel, digital input/output card operates in temperatures from 0 to 65 deg C. 48-channel board offers Change of State (COS) detection, determines data in one READ, and contains 2 type 82C55A Programmable Peripheral Interface chips (PPI). Each PPI provides two 8-bit ports on A and B and two 4-bit ports on C. Each of its 48 I/O lines is buffered and capable of sourcing...

Design System provides hierarchical access to parameters.

SPW 4.8 Signal Processing Worksystem block diagram design solution allows hardware, software, and RF engineers to collaborate on projects. Links with other tools include integrations with Xilinx Coregen solution, with analog design flow that supports Cadence(R) AMS Designer, and with SystemC 2.0. SPW 4.8 users can enter and simulate designs consisting of various types of models including C, C++,...

Vacuum Contactors are available in large frame models.

Sirius 3R contactors include 225, 265, 300, 400 and 500 A devices which perform 2.6 to 3.0 million operations at rated load. They are available with universal current conventional coils (24-600V ac/dc) and electronic coil. Electronic coil comes in 3 options: interface for direct control from 24 Vdc PLC or power supply, Remaining Lifetime to electronically measure contact erosion, and AS-interface...

Holder System offers +/- 0.01 in. tolerance in 4 axes.

FlexLoc Convertible Holder System for indexing conveyors provides nearly infinite number of interchangeable machined part-holders or cleats that mount on common, extruded urethane profile. Profile is ultrasonically welded to surface of reinforced urethane belt, and mates to slot in bottom of part holder, cleat or part-holder sub-plate. Profile pitch error of +/-0.02 in., inherent when profile is...