New Electronic Components & Devices Products

Electrical Terminals have slotted hole on terminal tongue.

AMPOWER slotted tongue electrical terminals employs design with 1 round stud hole and 1 slotted hole on terminal tongue. Product allows maintenance and repair shops to reduce electrical terminal inventories and simplifies installation for applications with stud spacing variations. Available in 4/0, 300 MCM, and 500 MCM wire ranges, products are offered in additional styles and are constructed of...

PCI Mezzanine Card is suited for caution/warning systems.

PMC-PIO provides 64 channels of 3.3 V parallel I/O, each of which is independently programmable as input or output channel. Bi-directional I/O signals are TTL- and CMOS-compatible and voltage-protected. Unit interfaces to 33 MHz, 32-bit PCI bus through P1 and P2 connectors and enables 16 bits of I/O, configured as input, to be used to generate interrupt on change of state. Product is offered in 3...

Sensor Amplifiers are DIN rail mounted.

Sensor Amplifiers offer hi-level output signals, ready for long cable runs and/or direct interface to common PLC interface cards. They provide controlled power to associated sensor and condition sensor's return signal before providing it to output terminals. Relay buffered shunt calibration circuit offers simplified calibration, set-up, and real time circuit verification. Outputs include Ã-

Foil Resistors are military-qualified to MIL-PRF-55182/9.

Series RNC90Z features resistance range from 100 W to 121 kW with tolerances from Ã-

Tips for Managing Dangerous Dust in Manufacturing Facilities

This eBook covers important considerations when creating a dust management plan for your facility. For more information, download now.

Watertight Hubs are suited for hazardous locations.

Suited for wet/quality-sensitive environments, Appleton Watertight Hubs connect rigid conduit or IMC to threadless openings in electrical enclosures. Indoor/outdoor products meet NEC requirements for locations where flammable vapors, gases, or combustible dusts are present. Units offer corrosion-resistant metallic construction with die cast design, insulated throat rated to 105Ã-

Cooling Products wrap around neck or head.

Available in bandanna or headband styles, Icy Blue Ones(TM) contain unique cooling crystals that provide up to 24 hr of heat relief. Products are soaked in cool water for 20 min to keep wearer refreshed and productive. Bandanna style ties around neck or forehead, and head-band style wraps around brow with hook and loop fasteners. Drybrow Sweatbands are Cool Blue Ones(TM) that keep users cool...

Thin-Film Resistors enable compact hybrid assembly designs.

Electro-Films Back Contact Resistors (BCRs), with single-bond design, measure 0.020 x 0.020 in. Resistor chips require only 1 wire bond, because second electrical connection is made through back of chip. Available with 10 ohms to 1 megohms resistance, tolerance values are provided down to 0.1% and TCR values range from Ã-

InGaAs Photodiodes have transimpedance amplifiers.

Housed in hermetically sealed, 4-pin, TO-46 package, photodetector hybrid devices feature InGaAs sensors with low noise transimpedance amplifiers (TIAs). FCI-H125/250G-InGaAs-70 models offers responsivity from 1100-1650 nm, while FCI-H155/622M-InGaAs-70 models have 70 mm InGaAs photodetectors with Automatic Gain Control function. Both series come with lensed caps or broadband double-sided AR...

Rectifiers are based on Schottky-barrier technology.

H-Type high-barrier-height rectifiers feature typical forward voltage drop as low as 0.49 V, typical leakage current as low as 2.0 mA at 125Ã-

I/O Card suits PC/104 applications.

Model RPC616 contains 16 digital-to-analog outputs, and 24 digital I/O with number of programmable modes. Analog outputs have 12-bit resolution and may be set to 7 voltage ranges including 2.5V, 5V, 10V, Ã-

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.