Electronic Components & Devices

Multi-Bag Filter Vessel reduces bag change time to 15 sec.

Multi-Bag Filter Vessel reduces bag change time to 15 sec.

Suited for industrial and commercial applications, SE MAXILINE(TM) reduces downtime required for filter media changing. Design incorporates spindle/interlock mechanism with integral QIC-LOCKÂ-® clamp, which prevents cover from being opened until vessel has been properly vented. Vessel cannot be re-pressurized until clamp has been fully closed and safety interlock engaged. Low-profile design...

Read More »
Wire Terminals facilitate manufacture of power cords.

Wire Terminals facilitate manufacture of power cords.

Male Twist Lock Terminals, with crimp ear that accommodates 10-16 AWG wire, eliminate need for tooling changes from one wire size to another. Offered in NEMA L5-15P (125 V), NEMA L6-15P (250V), and NEMA L7-15P (277 V) configurations for molded power cords, they are supplied in both strip form and as loose pieces. Products are constructed from 260 cartridge brass and rated 15 A.

Read More »
Magnetic Mat organizes tools and fasteners.

Magnetic Mat organizes tools and fasteners.

Flexible, non-conductive, PVC MagnaMatPro(TM) measures 12 in. sq x 3/16 in. thick. Neodymium iron-boron magnets hold up to 20 lb of metal tools, fasteners, and other ferrous objects. Mat also serves as magnetic sweep to retrieve objects such as nails, nuts, bolts, and washers that fall onto ground or out of reach. MagnaMatPro adheres to any iron or steel surface, flat or curved, coated or...

Read More »
Integrated Circuit powers automotive and industrial motors.

Integrated Circuit powers automotive and industrial motors.

Full-bridge, pre-driver Model A3940, suited for large, brush, DC motors, provides 4 gate-drive outputs capable of driving various N-Channel MOSFETs. Bootstrap capacitors provide above-battery supply voltage required for N-Channel FETs, while internal charge pump for high side allows for DC, 100% duty cycle, operation of bridge. PHASE and ENABLE input terminals are provided for controlling speed...

Read More »
Socket/Ratchet Sets deliver SuperTorque-® fastening power.

Socket/Ratchet Sets deliver SuperTorque-® fastening power.

With low profile design, socket and ratchet sets engage fastener flats for higher torque application. Configurations include: 14-piece, Â-¼ in. drive set; 12-piece, 3/8 in. drive set; 21-piece, 3/8 in. drive set; 12-piece, Â-½ in. drive set; and 17-piece, Â-½ in. drive set. Detents on all socket inner walls ensure tight, positive engagement with drive tool in any orientation. Ratchets...

Read More »
LED Modules connect to form customized lighting.

LED Modules connect to form customized lighting.

StripLEDÂ-® Connectable LED Modules each contain 4 bright, wide-angle (85Â-º) SpiderLEDs, 3 in. double-ended connector harness for daisy chain assembly, and pre-applied strip of 3MÂ-® double-sided foam tape. LEDs are wired in parallel and function independently. They are impervious to shock, vibration, frequent switching, and environmental extremes. Average life span is 100,000+...

Read More »
Pull Pins incorporate plastic handles.

Pull Pins incorporate plastic handles.

Spring-loaded pull pins, with ball or T-handles, allow users to quickly retract and engage plunger for locating, fastening, and quick-change operations. Housing, made of 12L15 steel for welding to fixture, accepts fully retracted plunger. Pins are available with plunger diameters from 1/4-5/8 in. Plungers, made from 1038 steel, have tensile strength of 90-95 ksi on all sizes except 5/8 in., which...

Read More »
I/O Cards suit PC/104 bus applications.

I/O Cards suit PC/104 bus applications.

High-speed, 16-bit, DSP-based A-D cards, Models 4A24-2 and 4A24-5, are 200 and 500 KHz, respectively. Cards feature EEPROM calibration storage and digital zero and span calibration that eliminates need for potentiometers. Choice of 16 single-ended or 8 differential inputs are provided via input multiplexer. Features include input channel scan sequence, averaging option, raw/calibrated data...

Read More »
Frequency Source suits wireless engineering applications.

Frequency Source suits wireless engineering applications.

Due to internal Ni-MH battery/charging system, Rhino3(TM) GPS-based frequency source provides reference frequencies anywhere without loss of synchronization. Once GPS satellites are acquired, ovenized crystal oscillator provides absolute accuracy and stability of 1E-10. Portable unit provides input references for 1 pps phase and 10 MHz frequency measurements and adjustment. Unit also offers 12...

Read More »

All Topics