New Electronic Components & Devices Products

Universal LED Mounts are self-retaining and lead free.

Molded from UL-rated 94V-O Nylon, SRM Series self-retaining LED mounts provide lead-free material per Directive 2002/95/EC for Reduction of Hazardous Substances (RoHS). Leads are guided through dividers within mounts to prevent possible shorting. Constructed with integrally molded standoffs, series accepts T-1, T-1Ã-¾, and rectangular LED devices and is available in 18 elevations from...

Fiber Optic Devices are offered in various styles.

CFE370, CFD470 and CFR520 feature self-aligning plastic lens caps, while CFR530 is a flat window, metal lens can device that provides hermetic seal. CFE370 contains an 850 nm AlGaAs DDH high speed fiber optic emitter with microlens centered on chip for efficient coupling. CFD470 contains 850 nm fiber optic PIN photodiode with 950 milÃ-² active area. CFR520 and CFR530 contain 5 Mb direct...

Bridge provides USB-to-serial connectivity.

Supporting both self- and bus-powered modes, Model TUSB3410 allows connectivity between serial-based embedded applications and laptops or legacy-free PCs. It contains 8052 microcontroller unit with 16 kB RAM that can be loaded from host or external on-board memory via I2C bus. Fully compliant with USB Full Speed specifications, bridge supports data rate of 12 Mbps and can sustain 6 total...

Planar Microwave Filters range from 1-18 GHz.

Housed in surface mount or connector oriented packages, Custom Planar Microwave Filters fulfill filter applications that are presently fabricated on OEM printed circuit boards. Design engineers can buy plug-and-play devices, cutting production and design cycle times and eliminating tuning on assembly.

Considerations for Choosing a Plastic Injection Molder

Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.

Surge Protective Devices have panel-mounted design.

Models 37120-007 and 37277-007 SPDs are suited for use in industrial and commercial facilities with 3-phase WYE-configured systems. Devices provide protection against high-energy transient voltage surges, and parallel-operated design features 40 mm diameter, metal-oxide varistors and EMI/RFI filter circuitry with high-voltage-rise capacitors for harmonic tolerance. Both models are 200KAIC rated...

Transmitter and Receiver deliver video over UTP cable.

IFS Copperline TPT1000M and TPR1000 video transmitter and receiver deliver EIA/TIA RS250-C Medium Haul Video Performance at 1,500 ft and beyond over Cat 5 or UTP Cable. Designed for plug-and-play installation, receiver has adjustments for Video Gain and Frequency and can be used with any brand of passive transmitter for extended distances with no compromise in video performance. Environmentally...

Signal Generators offer frequency ranges to 67 GHz.

PSG microwave signal generators are suited for use by engineers and system integrators who evaluate RF and microwave components. Analog units include E8257D models with frequency ranges of 50 and 67 GHz and output power greater than +12 dBm. Vector units include E8267D models with frequency ranges of 32 and 44 GHz. With wide modulation bandwidth option, vector signal generators can directly...

Mezzanine Card adds serial communication ports.

Model M75 features 2 on-board channels, which can be configured as full-duplex RS422 or half-duplex RS485 interfaces. Capable of up to 2 Mbps in synchronous or asynchronous modes, dual channels can support SDLC protocol, and are optically isolated from each other and from system. Four asynchronous FIFO memory queues, each with depth of 2 Kb in each direction, support simultaneous reading and...

Connector allows noise-immune CANbus communication.

CAN-OPTOkit connects CAN networks up to 1,000 ft apart by fiber optic cable. CAN-OPTOconv module converts CAN messages from modified CAN interface and sends them via fiber optic cable to CAN-OPTOtrans module. CAN-OPTOtrans converts optical CAN messages into standard electrical CAN, connected to copper-based CAN network cabling. CAN-OPTOkit is available for ISA, PCI, CompactPCI, and VMEbus systems...

Emitters offer mini-DIL package.

Pigtailed, 6-pin mini-DIL package is available for all 850, 1310, and 1550 nm F-P laser and ELED devices, as well as single-element 850, 905, and 1550 nm pulsed-laser devices. Fiber types range from single-mode to 100 Ã-µm multimode with max cladding diameter of 140 Ã-µm. Package features laser-welded fiber alignment and hermetic metallized fiber technology. Pins are arranged on 2.54 mm...