New Electronic Components & Devices Products

Amplifier drives high sampling rate A/D converters.

Model LT5514 850 MHz, programmable-gain, broadband amplifier exhibits output 3rd order intercept of 49 dBm at 70 MHz. It has 2nd and 3rd order distortion products lower than -87 dBc, while delivering 2 V peak-to-peak output into 200 ohm load. Variable gain is adjusted by on-chip, digitally controlled attenuator in combination with fixed gain amplifier. Unit is suited for 12- and 14-bit, 65 MS/sec...

Level Indicator is visible under low light conditions.

Suited for Magnicator IIÃ-® magnetic level gages, LevelStar bi-color LED indicator delivers across-the-plant visibility in day and night conditions. Lights provide continuous service life exceeding 80,000 hr. With no mechanical or moving parts, product is available in 120 and 240 Vac options and FM Approved for use in hazardous environments. Standard and customized color options are available.

System-on-Module suits VoIP applications.

Plug-N-Run 1.8 GHz G3 Module features IntelÃ-® PentiumÃ-® M processor 745 for VoIP convergence network applications. Its 2 MB L2 cache combined with up to 1 GB of PC2700 ECC memory is useful in handling large call volumes. High integer and floating point performance make it possible to implement VoIP PBX Host Media Processing server in volume slightly larger than 3.5 in. HDD, or to...

Modules allow design of multi-channel receivers.

Matrix(TM) digital radio channelizers offer mix and match way to create FFT solutions that maximize silicon efficiency. Range of channel banks, along with rate converter and numerically-controlled oscillator cores, allows channelized receivers to be developed on small FPGA devices. Modules can be used on both Xilinx and Altera FPGA families and can achieve continuous real-time processing of...

Design Guide: Heat Sinks for High-Power Applications

Without appropriate thermal management, electronic components will degrade over time, causing problems ranging from minor errors to critical failures.

Interface Converters operate at 1.25/1.0625 Gbps.

Gigabit Interface Converters provide bi-directional data communication using Gigabit Ethernet/Fiber Channel across distances of 40 or 80 km. The 40 km module operates at 1,310 nm using 9-micron single-mode optical fiber, while 80 km device operates at 1,550 nm using single-mode fiber. Both utilize device inputs/outputs that are PECL-compatible and internally AC coupled. Hot-pluggable units are...

Solenoids are designed for security applications.

Mecalectro(TM) solenoids enable electrically controlled action for applications with locking devices and mechanical signaling. Linear solenoids include types for standard, intensive, or heavy-duty applications, as well as bistable linear and self-holding latching solenoids. Rotary solenoids provide rotation angles of 45-90Ã-º. Shotbolts can function with power off or on, depending on type,...

RFID Memory Chip supports EPCglobal Class 1 specification.

Suitable for RFID transponders and tags for supply chain and logistics applications, Model XRA00 is suited for 902-928 MHz and 866-868 MHz bands. When connected to its antenna, chip's power is derived from RF energy produced by RFID readers. Operating up to 10 m from reader, chip contains 128-bit memory organized as 8 blocks of 16 bits. First block stores 16-bit CRC and next 6 blocks store 96-bit...

Capacitive Sensor Signal Conditioners come in varied styles.

Capacitive accelerometer signal conditioners provide excitation power for capacitive accelerometers and prepare their measurement signals for readout, recording, and data acquisition. Platforms are offered in portable, benchtop, modular, and rack-mount styles, all of which include per-channel null adjustment for zeroing DC offset voltage. Battery and optional dc-powered units are suited for...

Power Inductor Series handles currents up to 50 A.

Suited for switching power supplies and portable electronics, lead-free DZM Series is RoHS-compliant and free from thermal aging effects of standard iron powders. Design minimizes contact resistance and includes core material formulated to minimize core loss and provide MTBF of greater than one million hr of operation. Inductor series, in 13 x 13 x 6.0 mm package, filters and smoothes AC ripple...

PC/104-Plus Module has Ethernet and digital I/O.

Mercury PC/104-Plus module integrates Ethernet connectivity with digital I/O, eliminating need for additional board in embedded computing applications. It provides 2 PCI-based, NE2000-compatible, 10/100Mbps Ethernet ports utilizing National Semiconductor DP83815 Mac + Phy PCI controller chip. Its 24 digital I/O lines feature programmable direction in 4- and 8-bit groups. All I/O lines contain...

Von Ruden's Driven Tools Are Built to Last

Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.