Mechanical Components and Assemblies

GN 429 Cabinet U Handles are compliant to RoHS standards.
Mechanical Components and Assemblies

GN 429 Cabinet U Handles are compliant to RoHS standards.

GN 429 Cabinet U Handles are made from stainless steel material. Handle’s sealed mounting surfaces and quality finishing enable fastening without dead spaces and avoids adherence of dirt. Units are designed for use in hygiene areas and come with sealing ring with blue hydrogenated acrylonitrile butadiene rubber. The sealing ring is resistant to temperature range from -77° F to + 302 °F.

Read More »
MF Series Magnetic Filter Holders can withstand autoclaving.
Communication Systems & Equipment

MF Series Magnetic Filter Holders can withstand autoclaving.

MF Series Magnetic Filter Holders are constructed from Polyethersulfone (PES) material. Units feature built-in membrane guide and bevel designs for easy position and retrieval of filters. Holders use magnetic coupling between funnel and base that allows single handed operation. Units are suitable for volume measurement of both 300 ml and 500 ml funnels graduated in 50 mL increments in range of...

Read More »
Magnetic Suction Cup Mounting Plate comes with windload.
Electrical Equipment & Systems

Magnetic Suction Cup Mounting Plate comes with windload.

MMP-4XSCM-24X8 Suction Cup Mounting Plate is engineered from high strength composite and powder coated marine grade aluminum and a plate made from powder coated steel. Plate can be used on lights up to 20 lb. such as spotlights, flood lights, strobe lights, beacons, warning lights, signal lights and flashers. Product is suitable hunting, fishing, farming operations and off-roading applications...

Read More »
U1-050 Universal Compliance Compensator features internal reset piston.
Controls & Controllers

U1-050 Universal Compliance Compensator features internal reset piston.

U1-050 Universal Compliance Compensator is suitable for automated assembly, bin picking, loading and unloading machines, robotic finishing applications. Unit offers simultaneous X-Y lateral compliance, X-Y-Z axis rotation, and Z compression. Compensator eliminates misalignment by complying in many directions. Product comes with 50 mm ISO mounting pattern and can be configured for either a PNP or...

Read More »
Shaft Couplings Buying Guide
Sponsored

Shaft Couplings Buying Guide

Beam, bellows, chain, jaw, diaphragm, disc, gear, grid, Oldham, Schmidt, clamping-all styles of shaft couplings. With so many varieties, how are you supposed to choose the right coupling for your rotating shafts? Which one is going to give you the greatest connection and best absorb misalignments? This extensive buying guide will outline all of the above styles of coupling and advise you which one is best for every industry and application. Once you’re confident enough to make the correct shaft coupling purchase, you’ll also have a trusted list of suppliers to buy from.

Read More »
J Series Non-Metallic Enclosures offer 180° door opening.
Electrical Equipment & Systems

J Series Non-Metallic Enclosures offer 180° door opening.

J Series Non-Metallic Enclosures are offered in 30 x 24 in. and 24 x 30 in. sizes. Units are designed with field replaceable stainless steel latches and full length stainless steel piano hinge. Enclosures come with T-Slot design, dead front or din rail mounting and mounting foot gussets. Units are rated to NEMA 250 Type 1, 3, 3R, 4, 4X, 12, 13, IEC 60529 IP66 and UL94-5V standards and are UV...

Read More »
Tenney Environmental Ships Thermal Shock Chamber to Research Center
Mechanical Components and Assemblies

Tenney Environmental Ships Thermal Shock Chamber to Research Center

New Columbia, PA - January 12, 2018: Tenney Environmental announced the shipment of a Reach-In Thermal Shock Chamber to a research center for laboratory and technical R&D. The thermal shock chamber was purchased to run a variety of MIL-STD tests on various parts. The maximum temperature rating of the test chamber is 200°C with an operating temperature range of -73°C to 200°C in the bottom...

Read More »
Belleville Wire Cloth to Exhibit at 2018 AHR Expo
Display & Presentation Equipment

Belleville Wire Cloth to Exhibit at 2018 AHR Expo

Belleville Wire Cloth Co., Inc. will once again be taking part in the AHR Expo (International Air-Conditioning, Heating, and Refrigerating Exposition) in 2018. Belleville Wire Cloth will be showing off some of their latest products, including samples, in their Booth #1739. The show itself will be taking place on 1/22/18 in Chicago, Illinois. Belleville Wire Cloth will be featured in the following...

Read More »
Hybrid 4000 Monoplace Hyperbaric Chamber meets national fire protection agency requirements.
Mechanical Components and Assemblies

Hybrid 4000 Monoplace Hyperbaric Chamber meets national fire protection agency requirements.

Hybrid 4000 Monoplace Hyperbaric Chamber is used to treat one patient up to a pressure of 3 atmospheres absolute. Unit comes with dual modality option which consists of air and oxygen. Product features 40 in. ID with an integrated stretcher which has up to a 750 patient capacity. This chamber meets United States Food and Drug Administration 510(K) clearance.

Read More »
Altronix Showcases Latest Power and Transmission Solutions at Intersec 2018
Electrical Equipment & Systems

Altronix Showcases Latest Power and Transmission Solutions at Intersec 2018

Featured Solutions Deliver More Power, Versatility and Range Dubai, UAE (January 19, 2018) - Altronix is highlighting its latest power and transmission solutions designed specifically for professional security applications at Intersec 2018 (stand #S1-I48). Featured products include the company’s NetWay™ Spectrum Hardened PoE Switches and Ethernet-to-Fiber Media Converters, eBridge™ Ethernet...

Read More »
AMADA MIYACHI AMERICA to Showcase the Latest Laser and Resistance Welding and Processing Technology at MD&M West 2018
Food Processing & Preparation

AMADA MIYACHI AMERICA to Showcase the Latest Laser and Resistance Welding and Processing Technology at MD&M West 2018

Equipment ideal for precision medical applications on display at Booth #2801 MONROVIA, CA – AMADA MIYACHI AMERICA, INC., a leading manufacturer of welding, marking, cutting, sealing, and bonding technology, will be highlighting its Sigma Femtosecond Laser Tube cutting system in Booth #2801 at MD&M West, which takes place Feb 6-8, 2018 at the Anaheim Convention Center, in Anaheim, CA. Also to be...

Read More »
Sponsored

Vector Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector is helping ballplayers everywhere, see our video.

Read More »

All Topics