Mechanical Components and Assemblies

Solid Disk Handwheels are ISO 9001 certified.

Solid Disk Handwheels are ISO 9001 certified.

ElesaÂ-® solid disk handwheels are available with locking retractable handle or with safety fold-away handle. They are made from high-impact technopolymer plastic with black matte finish. Hub is molded and made of steel. Resistant to solvents, oils, grease, and other chemical agents, handwheels are available with keyways and set screw holes. They are designed for applications where it is...

Read More »
Couplings resist hostile environments.

Couplings resist hostile environments.

CD Couplings include hub and bushing that have high chemical and moisture resistance in hostile environments. Hubs are precision machined steel. Couplings are available in Single Flex models, which provide misalignment up to 3 deg angular, 0.025 in. parallel, and 0.160 in. axial. Double Flex models provide misalignment up to 3 deg angular, 0.089 in. parallel, and 0.32 in. axial. Both models are...

Read More »
Bellow Couplings assemble onto existing equipment.

Bellow Couplings assemble onto existing equipment.

BK2 series couplings are made with split hub and stainless steel bellow. Hub allows user to assemble coupling on existing equipment where shaft ends cannot be moved. Stainless steel bellow has high torsional rigidity with zero backlash; can compensate for axial, angular, and lateral misalignment simultaneously; and has low moment of inertia. Shaft hubs are bored for shaft diameters from 0.12 to...

Read More »
Damping Material stops noise and vibration in equipment.

Damping Material stops noise and vibration in equipment.

ISODAMP-® C-1000 Series thermoplastics, highly damped vinyl materials provide vibration isolation, shock protection and noise control. Three formulations are available as standard and custom-molded isolators. Materials exhibit extremely low amplification at resonance and quick return to system equilibrium after shock or vibration input. ISODAMP C-1002 performs in range from 13 to 41 deg C;...

Read More »
Air Amplifiers and How They Work
Sponsored

Air Amplifiers and How They Work

Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.

Read More »
Servo Insert Couplings provide dampening of loads/shocks.

Servo Insert Couplings provide dampening of loads/shocks.

SERVOMAX EK2 series couplings have elastomer elements press fit between 2 precision machined coupling halves, which gives them zero backlash and guaranteed concentricity. Elastomer inserts, available in 3 different shore values, electrically insulate 2 coupling halves, and allow users to choose level of dampening effect. Sizes are available for torque capacities ranging from 89 to 9735 in. lbs....

Read More »
Composite Rollers replace steel cam followers.

Composite Rollers replace steel cam followers.

Quiet-running, self-lubricating Power-Core rollers work in demanding, load-bearing applications where noise, moisture, shock, temperature and rail wear present challenging operating environment. Roller includes long-wearing composite tire with stress-free crystalline structure that resists flattening from compression under static loads. Deformation resistance and internal elasticity provide...

Read More »
Coil Steel Hold-Down Device offers heavy-duty components.

Coil Steel Hold-Down Device offers heavy-duty components.

CoilSafe2000 holds down coil steel while it is being loaded to material feed lines, permits safe band snipping, and prevents coil unwinding. Stand-alone unit is floor mounted, and adapts to existing material feed lines. It offers pneumatic operation with 600 PSI hold-down pressure, and does not require electrical power. Device accommodates coil sizes from 36 to 72+ in. with minimum stock width of...

Read More »
Rectangular Air Pad requires minimal maintenance.

Rectangular Air Pad requires minimal maintenance.

Monitor rectangular air pad promotes flow of dry bulk powders in storage vessels. By continuously introducing air into body of dry powder, air pad is able to maintain fluid like characteristic of aerated powder. Its effective radius is 10 in., and it can adapt to most bin configurations. External mounting kit is available. Air pad is suitable for dry powder applications including cement, resins,...

Read More »
Rotary Encoder Collar can be used to sense shaft speeds.

Rotary Encoder Collar can be used to sense shaft speeds.

Aluminum clamp-type collars can be configured with metallic targets to permit shaft speed sensing. Metallic targets can be read by customer-supplier variable reluctance sensors. Collars are unaffected by oils and coolants, and smooth bore will not damage shafts. They are available in one- and two-piece clamp-type designs with bore sizes from 1/2 in. and ODs up to 12 in. Applications include...

Read More »
Handles are available in many styles and sizes.

Handles are available in many styles and sizes.

Aluminum, brass and stainless steel handles match standard panel heights such as 3 1/2, 5 1/4, 6, 7, and 8 in. They are available in extruded, positive locking, folding and standard square, oval and wire types. All are distinguished by parallelism and consistent center-to-center measurements. Bar-type handles are available with tape inserts and 2, 3 or 4 legs.

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics