Mechanical Components and Assemblies

Stopper Cylinders manage conveyor workflow.

Stopper Cylinders manage conveyor workflow.

STA Series stops carriers, pallets, or packages containing workpieces. They are available in three models and 16 configurations, including: trunnion rod that stops workpiece carriers weighing up to 330 lb by protruding rod directly into path of carrier; roller style cylinder with piston rod that can stop carrier or allow it to roll at controlled speed; and toggle lever style that can stop load up...

Read More »
Handwheels are resistant to solvents, oils, and grease.

Handwheels are resistant to solvents, oils, and grease.

Two-Spoked Handwheels are available in 2 versions: either with or without revolving handle, or with locking retractable handle. Locking retractable handle is designed to pivot freely. ElesaÂ-® original designed handwheels are made from high-impact strength technopolymer plastic with black matte finish; hubs are molded in, and made of steel with black oxide finish; and cover disk is matte,...

Read More »
Swivel Fittings spin 360 degrees.

Swivel Fittings spin 360 degrees.

Metal Swivel Fittings are available in brass, nickel-plated brass or stainless steel, providing easy access in tight spots. They come in straight connectors, elbows and tees. Fittings can be provided in 10-32 through 1/2 NPT male or female threads and in 1/16 through 1/2 ID barb.

Read More »
Metric Chain fits conveyor lines globally.

Metric Chain fits conveyor lines globally.

Metric 7705 MatTop metric chain is available in both molded-to-width (84.0 mm) and assembled-to-width (85.0 mm increments) constructions. Sprocket pockets are on 85.0 mm centers. Both versions have same chain height, share same sprockets, and are identifiable by orange TwistLock plugs.

Read More »
Elastomeric Couplings feature 347 cast stainless steel ring.

Elastomeric Couplings feature 347 cast stainless steel ring.

Jaw In-Shear (JIS) 6-Pin elastomeric couplings are non-lubricated, drop-in replacements for grid spacer couplings. Converting to in-shear service doubles standard Jaw Coupling's angular misalignment capability to 20 and its parallel misalignment capability to 0.030-0.094 in., depending on size. Units fill BSE (Between Shaft End) gaps of 3.5, 5, 7, and 9 in., with maximum bores up to 5.5 in.,...

Read More »
Rail Bearing Slide comes in 3 travel lengths.

Rail Bearing Slide comes in 3 travel lengths.

Series SJP rail bearing slide is designed to provide smooth, precise, linear motion. Unit is available in bore sizes of 8, 12, and 16 mm. Internal shock pads eliminate metal to metal contact to reduce noise and end-of-travel impact forces. Metric mounting holes and pattern provide exact drop-in replacement to competitors' units. Slide body incorporates twin switch slots on either side for...

Read More »
Ballscrews do not utilize easily damaged parts.

Ballscrews do not utilize easily damaged parts.

Precision and commercial ground ballscrews, offered in both standard and metric sizes, are made in lengths up to 20 meters. Internal Return system eliminates external tubing and provides smooth ball flow. HVSD ballscrews can handle severe duty applications of up to 3000 rpm with extended unit design life.

Read More »
Mounted Units are fabricated from stainless steel.

Mounted Units are fabricated from stainless steel.

Stainless Steel Bearing inserts and housings provide load carrying capacity and corrosion resistance. Units feature solid base, which prevents contaminants from collecting in gaps, and silicon seals to discourage bacteria growth. They are suitable for applications in highly corrosive settings. Available shaft sizes include: pillow blocks from 0.75 to 1.5 in., flanges (2 bolt and 4 bolt) from 0.75...

Read More »
Hobas Pipe is made in pressure and non-pressure classes.

Hobas Pipe is made in pressure and non-pressure classes.

Hobas pipe is used for transmission of sewage, corrosive liquids, and wastewater. Centrifugally cast, fiberglass-reinforced polymer mortar pipe is resistant to both corrosion and ultra-violet attack. Its leak-free, push-together, gasket-sealed joints provide ease of installation. Standard 20 ft lengths require 1 support for each pipe section, and are available in all diameters. Hobas Pipe is...

Read More »
Cam Followers are suited for small-to-medium sized machines.

Cam Followers are suited for small-to-medium sized machines.

Cylindrical Roller Cam Followers, available in sizes from 1 to 10 in. diameter, are used in applications throughout packaging, transportation, robotics and automation, and material handling. Contacting lip seals provide positive protection against contamination, while keeping grease inside. Double row cylindrical rollers provide true-running performance. Units are lubricated for life and operate...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics